Marantz ZR6001SP Manual

The Marantz ZR6001SP is a high-performance audio receiver featuring 5.1 channel surround sound, 100W per channel output, Dolby Digital and DTS decoding, multiple audio inputs including optical and coaxial digital inputs, AM/FM tuner with 40 presets, remote control, speaker setup calibration, bass management, and various sound modes. Powered by 120V AC, 60Hz. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Audio Modes and Processing 8. Tuner Operation 9. Care & Maintenance 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Main unit with display panel, Remote Control, Speaker terminals, Audio inputs (optical/coaxial), AM/FM antenna terminals, Headphone jack, AC power input.

Feature	Description
Power output	100W per channel (6 ohms, 1kHz, 0.7% THD)
Audio decoding	Dolby Digital, DTS, Pro Logic II
Digital inputs	2 optical, 1 coaxial
Analog inputs	4 stereo RCA inputs
Speaker terminals	5.1 channel binding posts
Headphone jack	6.3mm stereo jack for private listening
Tuner	AM/FM with 40 station presets
Sound modes	Hall, Theater, Stadium, Night
Remote control	Full-function infrared remote
Auto calibration	Built-in speaker setup system

Installation

Unpack and inspect contents. Place on stable, well-ventilated surface.

Connect speakers: Use proper gauge speaker wire to appropriate terminals (Front L/R, Center, Surround L/R, Subwoofer).
Connect audio sources: Use digital or analog inputs for CD player, DVD player, gaming console, etc.
Connect antennas: Attach AM loop antenna and FM wire antenna to respective terminals.
Plug into AC power outlet.

WARNING! Ensure proper ventilation around unit; do not block vents. Use correct speaker impedance (6-16 ohms).

First-Time Setup

Power on receiver; follow on-screen display prompts.

Auto speaker setup: Use built-in calibration microphone and run auto setup for optimal sound.
Set input assignments: Assign digital/analog inputs to appropriate sources.
Configure tuner: Auto-scan for AM/FM stations and store presets.
Adjust sound settings: Set bass, treble, balance, and delay settings.

CAUTION! Ensure all connections are secure before powering on. Keep magnetic devices away from unit.

Specifications

Power Output: 100W x 5 channels (6 ohms, 1kHz)
Frequency Response: 10Hz - 100kHz (+1/-3dB)
Signal-to-Noise Ratio: 100dB (line input)
Total Harmonic Distortion: 0.08% (20Hz-20kHz)
Inputs: 4 analog stereo, 2 optical digital, 1 coaxial digital
Outputs: 5.1 channel speaker, subwoofer pre-out, headphone
Tuner: AM/FM with RDS
Power Requirements: 120V AC, 60Hz, 450W
Dimensions: 17.3" W x 5.9" H x 15.4" D
Weight: 22 lbs

Controls and Settings

Front Panel: POWER, INPUT SELECT, VOLUME, TONE, MUTE, HEADPHONE, DISPLAY.

Remote: POWER, INPUT SELECT, VOLUME, MUTE, TONE, SURROUND MODE, TUNER PRESETS, NUMERIC KEYPAD.

Audio Settings: Bass, Treble, Balance, Loudness, Night Mode. Surround Modes: Dolby Digital, DTS, Pro Logic II, Hall, Theater, Stadium. Tuner: Auto/manual tuning, Preset memory. System: Input assignment, Speaker configuration, Delay settings, Reset options.

Connecting Devices

Audio Sources: Use analog RCA or digital optical/coaxial inputs. Speakers: Proper polarity to binding posts.

Turn off receiver and devices before connecting.
Match cable types to appropriate inputs (digital to digital, analog to analog).
Select input source via INPUT SELECT button or remote.
Set proper input mode (analog/digital) in menu if needed.

Tip: Use high-quality cables for best audio performance. Keep signal cables away from power cords.

Audio Modes and Processing

Supports various surround sound and DSP modes.

Dolby Digital: For 5.1 channel digital sources.
DTS: Digital Theater Systems decoding.
Pro Logic II: For stereo-to-surround conversion.
DSP Modes: Hall, Theater, Stadium for enhanced listening.
Direct Mode: Bypasses tone controls for pure audio.
Night Mode: Compresses dynamic range for late-night listening.

WARNING! Do not exceed maximum volume levels to prevent speaker damage and hearing loss.

Tuner Operation

AM/FM tuner with 40 station presets and RDS display.

Tuning: Auto-scan or manual tuning available.
Presets: Store up to 40 stations (20 FM, 20 AM).
RDS: Displays station information when available.
Mono/Stereo: Auto switching for FM reception.

Care & Maintenance

Unplug before cleaning. Use soft, dry cloth only; no liquids or chemical cleaners.

CAUTION! Do not block ventilation openings. Keep unit away from heat sources and moisture.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © 2007 Marantz; trademarks of Marantz America, Inc. For support, visit www.marantz.com or contact 1-800-270-2753.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No sound	Input selection/volume	Check input selection; increase volume; ensure mute is off.
Distorted sound	Speaker connections	Check speaker wire polarity; ensure proper impedance.
No power	Power cord/outlet	Check power connection; try different outlet; check fuse.
Remote not working	Batteries/obstacles	Replace batteries; ensure clear path to IR sensor.
Poor radio reception	Antenna placement	Reposition antennas; ensure proper connection.
Overheating	Ventilation	Ensure adequate ventilation; clear vents of obstructions.

Reset: Hold POWER and INPUT SELECT for 5 seconds to factory reset.

Service: 1-800-270-2753; www.marantz.com