Marantz TT2000 Turntable Manual

The Marantz TT2000 is a high-performance belt-drive turntable featuring a precision DC motor, S-shaped tonearm with adjustable counterweight and anti-skate, built-in phono preamp, adjustable feet for leveling, and compatibility with MM/MC cartridges. Below are key sections for setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Belt-drive mechanism, S-shaped tonearm, DC motor, built-in phono preamp, adjustable feet, dust cover.

Unpacking and Setup

Unpack and inspect all components. Place on stable, level surface.

1. Remove protective packaging from platter and tonearm.
2. Install platter: Place belt on motor pulley, align platter on spindle.
3. Install cartridge: Mount included MM cartridge to headshell.
4. Connect power: Plug AC adapter into power outlet.
5. Level turntable: Adjust feet until bubble level is centered.

WARNING! Handle tonearm with care to avoid damage. Keep away from magnetic fields.

Tonearm Setup

Proper tonearm setup is critical for optimal sound quality and record protection.

1. Balance tonearm: Rotate counterweight until tonearm floats level.
2. Set tracking force: Rotate counterweight dial to recommended setting (1.5-2.0g for included cartridge).
3. Set anti-skate: Adjust anti-skate to match tracking force.
4. Check alignment: Ensure cartridge is properly aligned in headshell.
5. Set height: Adjust tonearm height for proper VTA.

CAUTION! Use digital scale to verify tracking force for accuracy.

Specifications

• Drive System: Belt-drive
• Motor: DC servo-controlled
• Speeds: 33 1/3, 45, 78 RPM
• Wow & Flutter: < 0.1%
• Signal-to-Noise: > 70dB
• Tonearm: S-shaped static balance
• Cartridge: MM type included
• Output: Phono/Line selectable
• Power: DC 12V adapter
• Dimensions: 420 x 360 x 120mm
• Weight: 5.5kg

Controls and Operation

Front Panel: POWER switch, SPEED selector (33/45/78), START/STOP button.

Tonearm Controls: Lift lever, cueing device, counterweight, anti-skate dial.

Operation: Select speed, press START, manually lift tonearm and place on record. Auto-return function activates at record end. Use cueing lever for gentle lowering/raising.

Connecting to Audio System

Two connection methods available: Phono output and Line output.

1. Phono output: Connect to PHONO input on amplifier (preamp disabled).
2. Line output: Connect to AUX input on amplifier (built-in preamp enabled).
3. Ground wire: Connect ground terminal to amplifier ground.
4. Power: Connect AC adapter to turntable and wall outlet.

Tip: Use high-quality RCA cables for best sound quality.

Playing Records

Follow proper procedure to ensure optimal playback and record protection.

1. Clean record: Use anti-static brush before playing.
2. Select speed: Choose 33, 45, or 78 RPM based on record.
3. Start platter: Press START button.
4. Cue record: Lift tonearm using cueing lever, position over record start.
5. Lower tonearm: Gently lower cueing lever to begin playback.
6. End of play: Auto-return will lift tonearm at record end.
7. Stop: Press STOP button to stop platter rotation.

WARNING! Never move turntable during operation. Keep dust cover closed when not in use.

Maintenance and Care

Regular maintenance ensures optimal performance and longevity.

• Clean stylus: Use stylus brush after every play session.
• Replace belt: Every 2-3 years or if speed inconsistency occurs.
• Lubricate: Apply light oil to motor spindle annually.
• Clean platter: Use isopropyl alcohol and lint-free cloth.
• Store properly: Keep dust cover closed, avoid direct sunlight.

CAUTION! Never touch stylus with fingers. Use only recommended cleaning tools.

Technical Specifications

Regulatory Information

CE, RoHS compliant. Manufactured under quality standards. Copyright © Marantz. For support, visit www.marantz.com or contact authorized service centers. Serial number located on bottom plate.

Troubleshooting

Service: Contact authorized Marantz service center for repairs.

Support: www.marantz.com