Marantz TT15S1 Manual

The Marantz TT15S1 is a high-performance turntable featuring a precision belt-drive system, acrylic platter, adjustable tonearm with fluid damping, built-in phono preamplifier, and compatibility with moving magnet and moving coil cartridges. Designed for audiophile listening with low wow and flutter, high signal-to-noise ratio, and vibration-dampening construction. Below are key sections for setup, operation, maintenance, and technical specifications.

1. Features at a Glance 2. Unpacking and Setup 3. First-Time Assembly 4. Technical Specifications 5. Controls and Operation 6. Cartridge Installation 7. Playback and Listening 8. Maintenance and Care 9. Warranty Information 10. Troubleshooting

Features at a Glance

Key components: Belt-drive motor system, acrylic platter, S-shaped tonearm, built-in phono stage, adjustable counterweight, anti-skate control, hinged dust cover.

Feature	Description
Drive System	Precision belt-drive with DC motor
Platter	Heavy acrylic for reduced resonance
Tonearm	S-shaped with fluid damping and adjustable VTA
Speeds	33 1/3 RPM and 45 RPM
Phono Stage	Built-in MM/MC compatible preamplifier
Wow & Flutter	Less than 0.1%
Signal-to-Noise	Greater than 80dB
Cartridge	Includes high-output moving coil cartridge
Dust Cover	Hinged acrylic cover
Power Supply	AC adapter included

Unpacking and Setup

Carefully unpack all components and inspect for damage.

Remove turntable from packaging: Lift by base, not tonearm or platter.
Place on stable surface: Use vibration-isolating platform if possible.
Install platter: Place acrylic platter on spindle.
Install belt: Loop drive belt around motor pulley and platter.
Connect power: Use included AC adapter.

WARNING! Handle tonearm with care; avoid touching stylus. Ensure surface is level and stable.

First-Time Assembly

Complete assembly before first use.

Install counterweight: Screw onto tonearm rear and adjust for balance.
Set tracking force: Use calibrated gauge to set recommended force (1.8-2.2g).
Adjust anti-skate: Set to match tracking force value.
Install cartridge: Align and secure with provided screws.
Connect cables: RCA outputs to amplifier phono input or line input if using built-in preamp.

CAUTION! Use proper tools for cartridge alignment. Handle records by edges only.

Technical Specifications

Type: Belt-drive turntable
Motor: DC servo-controlled
Speeds: 33 1/3 RPM, 45 RPM
Wow & Flutter: < 0.1% (WRMS)
Signal-to-Noise: > 80dB (DIN B)
Tonearm: S-shaped, static balanced
Cartridge: Moving coil, nude elliptical stylus
Output: RCA phono/line level
Power: 12V DC adapter
Dimensions: 440 x 360 x 130 mm
Weight: 8.5 kg

Controls and Operation

Front panel: POWER switch, SPEED selector (33/45), START/STOP button.

Tonearm controls: Lift lever, counterweight adjustment, anti-skate dial, VTA adjustment.

Speed selection: Use front panel switch for 33 or 45 RPM. Start/Stop: Press button to begin rotation. Cueing: Use lift lever for gentle tonearm lowering. Phono stage: Switch between phono and line output modes.

Cartridge Installation

Proper cartridge alignment is critical for optimal performance.

Loosen mounting screws: Allow cartridge movement in headshell.
Align cartridge: Use protractor for proper geometry.
Secure screws: Tighten evenly without over-tightening.
Connect wires: Color-coded leads to corresponding terminals.
Set tracking force: Use digital scale for precision.

Tip: Use magnifying glass for precise alignment. Keep stylus guard on when not playing.

Playback and Listening

For optimal vinyl playback experience.

Clean record: Use anti-static brush before playing.
Select speed: Choose 33 or 45 RPM based on record.
Start platter: Press START button.
Cue record: Use lift lever to lower stylus onto lead-in groove.
Adjust volume: Set appropriate listening level on amplifier.
End play: Use lift lever to raise tonearm, then STOP button.

WARNING! Never move turntable during playback. Always use dust cover when not in use.

Maintenance and Care

Regular maintenance ensures long-term performance.

Cleaning: Use soft cloth for dust cover and plinth. Stylus care: Clean with soft brush after each use. Belt inspection: Check for wear every 6 months. Lubrication: Professional service recommended for motor bearing.

CAUTION! Do not use solvents or abrasive cleaners. Store in dry, temperature-stable environment.

Warranty Information

Marantz TT15S1 includes 2-year limited warranty covering manufacturing defects. Warranty registration required within 30 days of purchase. For service, contact authorized Marantz service centers. Keep original packaging for any required shipping.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No sound	Input selection/cables	Check amplifier input selection; verify cable connections; ensure phono/line switch is correct.
Speed variation	Belt issues	Check belt placement and condition; clean pulley; ensure proper tension.
Distorted sound	Tracking force	Recheck tracking force setting; verify anti-skate adjustment; inspect stylus for wear.
Motor not starting	Power supply	Verify AC adapter connection; check power outlet; inspect fuse if applicable.
Tonearm drift	Leveling/anti-skate	Ensure turntable is level; readjust anti-skate setting; check bearing movement.

Service: Contact authorized Marantz service center for technical support.

Support: www.marantz.com or customer service hotline.