marantz sr9600 manual download

The Marantz SR9600 is a high-end AV receiver featuring 7.1 channel surround sound, THX Ultra2 certification, 140 watts per channel, HDMI connectivity, Dolby Digital EX, DTS-ES, Dolby Pro Logic IIx, advanced room calibration, multi-zone audio/video capability, RS-232 control, and extensive connectivity options. Below are key sections for features, installation, setup, operation, specifications, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Audio/Video Setup 8. Multi-Zone Operation 9. Care & Maintenance 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: 7.1 channel amplifier, HDMI switching, THX Ultra2 certification, RS-232 control port, multi-zone capability, advanced audio processing.

Feature	Description
Power Output	140 watts per channel (8 ohms, 20Hz-20kHz)
Surround Formats	Dolby Digital EX, DTS-ES, Dolby Pro Logic IIx
HDMI Ports	2 inputs, 1 output with video upscaling
Component Video	3 inputs, 1 output with conversion
Multi-Zone	Zone 2 and Zone 3 audio/video capability
RS-232 Control	For custom installation and control systems
Room Calibration	Auto setup with included microphone
Audio Inputs	7.1 analog, optical/coaxial digital, phono
Network Ready	Ethernet port for firmware updates
THX Ultra2	Certified for larger home theater rooms

Installation

Unpack and inspect contents. Place in well-ventilated area.

Connect speakers: Use appropriate gauge speaker wire for each channel.
Connect video sources: Use HDMI, component, or composite video connections.
Connect audio sources: Use digital optical/coaxial or analog inputs.
Connect subwoofer: Use LFE or line-level subwoofer output.
Plug into AC power using supplied power cord.

WARNING! Ensure proper ventilation; do not block cooling vents. Unit may become hot during operation.

First-Time Setup

Power on receiver; follow on-screen setup wizard.

Run auto calibration: Connect setup microphone; follow on-screen instructions.
Set speaker configuration: Specify size, distance, and crossover settings.
Configure inputs: Assign sources to input buttons.
Set video options: Configure HDMI settings and video conversion.
Configure multi-zone: Set up Zone 2 and Zone 3 if needed.

CAUTION! Ensure all connections are secure before powering on.

Specifications

Power Output: 140W x 7 channels (8 ohms, 20Hz-20kHz, 0.05% THD)
Frequency Response: 10Hz-100kHz (+1, -3dB)
Signal-to-Noise: 100dB (line level)
HDMI: 2 inputs, 1 output with 1080p upscaling
Component Video: 3 inputs, 1 output
Digital Audio: 4 optical, 2 coaxial inputs
Multi-Zone: Zone 2 and Zone 3 capable
THX Certification: THX Ultra2
Power Consumption: 750W maximum
Dimensions: 17.3" W x 7.7" H x 18.1" D
Weight: 48.5 lbs

Controls and Settings

Front panel: POWER, INPUT SELECT, VOLUME, SETUP, STATUS. Remote control: Complete system control with learning capability.

Main Settings: Speaker configuration, crossover settings, distance settings, level calibration, input assignment, video setup, multi-zone configuration, network settings.

Audio: Surround mode selection, tone controls, loudness, dynamic range compression. Video: HDMI control, resolution output, video conversion. System: Firmware update, RS-232 control, trigger outputs.

Connecting Devices

HDMI: For modern video sources. Component: For HD video sources. Analog: For legacy equipment.

Turn off all devices before connecting.
Use high-quality HDMI cables for best performance.
Assign inputs in setup menu for easy selection.
Connect multi-zone speakers to appropriate terminals.

Tip: Use the auto calibration microphone for optimal sound quality.

Audio/Video Setup

Advanced calibration and configuration options.

Auto setup: Run room calibration with included microphone.
Manual adjustment: Fine-tune speaker levels and distances.
Crossover settings: Set appropriate frequencies for each speaker.
EQ adjustment: Use parametric equalizer for room correction.
Video settings: Configure HDMI output resolution and conversion.

WARNING! Ensure proper speaker polarity for correct phase alignment.

Multi-Zone Operation

Zone 2 and Zone 3 independent audio/video playback.

Connect Zone 2 speakers to dedicated terminals.
Configure Zone 2 source selection and volume control.
Set up Zone 3 for additional audio zones if needed.
Use remote or control system for zone management.

Care & Maintenance

Keep unit clean and dust-free. Ensure proper ventilation at all times.

CAUTION! Unplug unit before cleaning. Use soft, dry cloth only. Do not use liquid cleaners.

Regulatory Information

FCC compliant. CE certified. THX Ultra2 certified. Manufactured to meet international safety standards. For technical support, contact Marantz customer service or visit www.marantz.com.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No sound	Input selection/speaker wires	Check input selection; verify speaker connections; ensure volume not muted.
No video	HDMI connection/settings	Check HDMI cables; verify input assignment; check video output settings.
Remote not working	Batteries/obstructions	Replace batteries; ensure clear line of sight to IR sensor.
Overheating	Ventilation blockage	Ensure adequate ventilation; clear vents of dust and obstructions.
Network issues	Ethernet connection	Check Ethernet cable; verify network settings; restart router.

Reset: Press and hold STATUS and ENTER while powering on for factory reset.

Service: Contact authorized Marantz service center for repairs.