marantz sr9200 manual download

The Marantz SR9200 is a high-performance AV receiver featuring Dolby Digital and DTS decoding, 7-channel amplification, multi-room audio capabilities, extensive connectivity options including digital and analog inputs, and advanced audio processing. Below are key sections for features, installation, setup, operation, specifications, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Audio Setup 8. Multi-Room Operation 9. Care & Maintenance 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: 7-channel amplifier, Dolby Digital/DTS decoder, multi-zone audio, comprehensive input/output terminals.

Feature	Description
Power Output	110W x 7 channels (8 ohms, 20Hz-20kHz)
Audio Decoding	Dolby Digital, DTS, Dolby Pro Logic II
Inputs	6 digital (3 optical, 3 coaxial), 8 analog audio, 6 composite video
Outputs	7.1 pre-outs, composite video, multi-room audio
Multi-room	Zone 2 audio output with independent source selection
Setup Assistant	Automatic speaker configuration and calibration
Remote Control	Learning remote with macro functions
Display	Fluorescent display with dimmer control
Tone Controls	Bass, treble, and balance adjustments
Headphone Jack	Front panel for private listening

Installation

Unpack and inspect contents. Place in well-ventilated area.

Connect speakers: Match polarity (+/-) for all 7 channels.
Connect source devices: Use appropriate digital/analog inputs.
Connect video display: Use composite or component video outputs.
Connect antennas: AM loop and FM wire antennas.
Plug into AC power.

WARNING! Ensure proper ventilation; allow at least 4 inches of clearance around unit.

First-Time Setup

Power on receiver; follow on-screen setup assistant.

Run auto setup: Connect calibration microphone and follow prompts.
Set speaker configuration: Large/small, distances, levels.
Configure inputs: Assign digital inputs to sources.
Set multi-room options: Configure Zone 2 if needed.
Save settings: Store configuration in memory.

CAUTION! Do not move microphone during auto setup process.

Specifications

Power Output: 110W x 7 (8 ohms, 20Hz-20kHz, 0.08% THD)
Frequency Response: 10Hz-100kHz (+1/-3dB)
Signal-to-Noise: 100dB (line level)
Total Harmonic Distortion: 0.08% (rated power)
Digital Inputs: 3 optical, 3 coaxial
Analog Inputs: 8 stereo pairs
Video Inputs: 6 composite, 3 S-video
Outputs: 7.1 pre-outs, composite video, Zone 2 audio
Power Consumption: 650W maximum
Dimensions: 440 x 468 x 171mm (W x D x H)
Weight: 15.8 kg

Controls and Settings

Front Panel: POWER, INPUT SELECT, VOLUME, HEADPHONE, SETUP. Display: Source, format, volume level, status indicators.

Remote: POWER, INPUT SELECT, VOLUME, MUTE, numeric keys, transport controls, SETUP, TEST TONE.

Setup Menu: Speaker configuration, input assignment, tone controls, multi-room setup. Audio: Surround mode selection, bass management, delay settings. Video: Input/output configuration.

Connecting Devices

Sources: DVD, CD, cable/satellite, gaming consoles, turntable (with phono preamp).

Turn off receiver before connecting devices.
Use digital connections for best audio quality.
Assign inputs in setup menu.
Connect video sources to appropriate inputs.
Connect speakers observing proper polarity.

Tip: Use high-quality cables for best performance.

Audio Setup

Surround modes: Dolby Digital, DTS, Dolby Pro Logic II, stereo, direct.

Select surround mode: Use MOVIE, MUSIC, or DIRECT buttons.
Adjust channel levels: Use test tone and SPL meter.
Set crossover: 80Hz recommended for small speakers.
Configure bass management: Subwoofer mode and crossover.
Save custom settings: In memory presets.

WARNING! Avoid extreme volume levels to prevent speaker damage.

Multi-Room Operation

Zone 2: Independent audio source selection and volume control.

Connect Zone 2 speakers to dedicated terminals.
Select Zone 2 source: Use remote or front panel.
Control Zone 2 volume: Separate volume control.
Configure in setup menu: Source availability and settings.

Care & Maintenance

Unplug before cleaning. Use soft, dry cloth only; no liquids or chemicals.

CAUTION! Keep away from moisture and heat sources. Ensure proper ventilation.

Regulatory Information

FCC compliant; CE marked. Manufactured under license from Dolby Laboratories. DTS and DTS Digital Surround are registered trademarks. For support, visit www.marantz.com or contact authorized service centers.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power	Power cord, outlet	Check power connection; try different outlet; check fuse.
No sound	Input selection, mute	Verify input selection; check mute status; speaker connections.
No video	Input assignment, cables	Check video input assignment; verify cable connections.
Remote not working	Batteries, obstacles	Replace batteries; ensure clear path to IR sensor.
Overheating	Ventilation, impedance	Ensure proper ventilation; check speaker impedance.
No surround sound	Source, settings	Verify source material; check surround mode selection.

Reset: Press and hold TONE and SURROUND buttons while powering on.

Service: Contact authorized Marantz service center; www.marantz.com