Marantz SR8000 User Manual

The Marantz SR8000 is a high-performance AV receiver featuring Dolby Digital and DTS decoding, 7-channel amplification, multi-room capability, digital audio inputs, component video switching, AM/FM tuner with 40 station presets, learning remote control, and advanced audio processing. With 100 watts per channel, this receiver delivers exceptional sound quality for home theater systems. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Audio Setup 8. Multi-Room Operation 9. Care & Maintenance 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: 7-channel amplifier, Dolby Digital/DTS decoder, AM/FM tuner, multi-zone capability, component video switching, learning remote.

Feature	Description
Power Output	100 watts per channel (8 ohms, 20Hz-20kHz)
Audio Decoding	Dolby Digital, DTS, Dolby Pro Logic II
Video Inputs	Component video, composite video, S-video
Audio Inputs	Optical/coaxial digital, analog RCA
Multi-room	Zone 2 audio output capability
Tuner	AM/FM with 40 station presets
Remote	Learning remote with backlight
Speaker Terminals	7-channel binding posts
Setup Microphone	Auto calibration input
Power Consumption	500 watts maximum

Installation

Unpack and inspect contents. Place in well-ventilated area.

Connect speakers: Use appropriate gauge wire for front, center, surround, and surround back channels.
Connect source components: DVD player, cable box, gaming console to appropriate inputs.
Connect video display: Use component video or composite video output to TV/projector.
Connect antenna: AM loop antenna and FM wire antenna to respective terminals.
Plug into AC power.

WARNING! Ensure adequate ventilation; do not block ventilation openings. Heavy unit - lift with care.

First-Time Setup

Power on receiver; follow on-screen display or front panel indicators.

Auto speaker setup: Connect setup microphone, run auto calibration for optimal sound.
Input assignment: Assign digital inputs to source components in setup menu.
Tuner setup: Auto-scan for AM/FM stations and store presets.
Speaker configuration: Set speaker sizes, distances, and crossover frequencies.
Video setup: Configure video output resolution and aspect ratio.

CAUTION! Ensure all connections are secure before powering on.

Specifications

Power Output: 100W x 7 (8 ohms, 20Hz-20kHz, 0.08% THD)
Frequency Response: 10Hz-100kHz (+1/-3dB)
Signal-to-Noise Ratio: 100dB (line level)
Total Harmonic Distortion: 0.08% (20Hz-20kHz)
Digital Inputs: 4 optical, 2 coaxial
Analog Inputs: 6 stereo pairs
Video Inputs: 3 component, 6 composite, 4 S-video
Speaker Impedance: 6-16 ohms
Power Requirements: 120V AC, 60Hz
Dimensions: 17-1/8" W x 6-3/4" H x 16-1/4" D
Weight: 33 lbs

Controls and Settings

Front Panel: POWER, INPUT SELECT, VOLUME, TONE, SPEAKERS A/B, HEADPHONE.

Remote: POWER, INPUT SELECT, VOLUME, MUTE, SURROUND MODE, TONE, SLEEP, numeric buttons.

Audio Settings: Bass, treble, balance, loudness, surround mode (Dolby Digital, DTS, Pro Logic). Video Settings: Output resolution, aspect ratio control. Tuner Settings: Preset memory, auto scan, manual tuning. System Settings: Input rename, speaker configuration, delay settings.

Connecting Devices

Audio Sources: CD player, turntable, tape deck to analog inputs. Video Sources: DVD player, cable box, gaming console to component/composite inputs.

Turn off receiver and components before connecting.
Use high-quality cables for best performance.
Assign digital inputs in setup menu for proper decoding.
Connect subwoofer via LFE or line-level output.

Tip: Use component video for high-definition sources for best picture quality.

Audio Setup

Advanced audio configuration for optimal performance.

Speaker calibration: Use auto setup or manual measurement for speaker distances.
Crossover settings: Set appropriate crossover frequency for each speaker.
Channel levels: Adjust individual channel levels for balanced sound.
Surround modes: Select appropriate decoding mode for source material.
EQ settings: Use tone controls or equalizer for room correction.

Note: Auto calibration provides optimal settings for most rooms.

Multi-Room Operation

Zone 2 capability for whole-house audio.

Connect Zone 2 speakers to dedicated terminals.
Select Zone 2 source from main unit or remote.
Adjust Zone 2 volume independently.
Use remote extender for IR control in second room.

Note: Zone 2 operates in stereo mode only.

Care & Maintenance

Unplug before cleaning. Use soft, dry cloth for exterior. Keep ventilation openings clear.

CAUTION! Do not use liquid cleaners or aerosols. Avoid moisture and extreme temperatures.

Regulatory Information

FCC Part 15: Class B digital device compliant. UL listed for safety. Copyright © Marantz America, Inc. Dolby and DTS are registered trademarks. For support, visit www.marantz.com or contact 1-800-270-2745.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No sound	Speaker connections/mute	Check speaker wires; ensure mute is off; verify input selection.
No picture	Video connections	Check video cables; verify input/output assignments; try different input.
Remote not working	Batteries/obstructions	Replace batteries; ensure clear path to IR sensor; check mode selection.
Overheating	Ventilation blocked	Ensure adequate ventilation; clear obstructions; check impedance matching.
No surround sound	Input/decoding settings	Verify digital input assignment; select appropriate surround mode.

Reset: Press and hold TONE and SURROUND MODE while powering on for factory reset.

Service: 1-800-270-2745; www.marantz.com