Marantz SR7007 Full User Manual

The Marantz SR7007 is a high-performance 7.2 channel AV receiver featuring 125W per channel, advanced audio processing with Dolby TrueHD and DTS-HD Master Audio, HDMI connectivity with 4K upscaling, network streaming capabilities, AirPlay compatibility, built-in Wi-Fi and Ethernet, Audyssey MultEQ XT room calibration, and multi-zone audio/video distribution. Below are key sections for setup, features, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Network and Streaming 8. Audio Calibration 9. Care & Maintenance 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: 7.2 channel amplifier, HDMI inputs/outputs, network connectivity, remote control, Audyssey calibration microphone, speaker terminals, and multi-zone outputs.

Feature	Description
Power Output	125W per channel (8 ohms, 20Hz-20kHz)
HDMI Inputs	8 inputs with 4K upscaling
Network Connectivity	Built-in Wi-Fi and Ethernet
Audio Formats	Dolby TrueHD, DTS-HD Master Audio
Streaming Services	AirPlay, internet radio, Spotify Connect
Room Calibration	Audyssey MultEQ XT
Multi-zone	Zone 2 and Zone 3 audio/video
Bluetooth	Optional via AS-BT100 adapter
Phono Input	MM phono stage for turntables
Front Panel USB	For iPod/iPhone connectivity

Installation

Unpack and inspect contents. Place in well-ventilated area.

Connect speakers: Use appropriate gauge speaker wire for each channel.
Connect source devices: Use HDMI cables for best quality audio/video.
Connect TV: Use HDMI OUT (MONITOR) to TV input.
Connect network: Use Ethernet cable or configure Wi-Fi.
Plug into AC power.

WARNING! Ensure adequate ventilation; do not block cooling vents. Use proper speaker impedance matching.

First-Time Setup

Power on receiver; follow on-screen setup wizard.

Run Audyssey calibration: Connect microphone and follow prompts.
Configure inputs: Assign sources to HDMI inputs.
Set network connection: Configure Wi-Fi or Ethernet settings.
Configure audio settings: Set speaker sizes, distances, levels.
Set video options: Configure 4K upscaling and video modes.

CAUTION! Ensure proper speaker polarity and secure connections.

Specifications

Amplifier Section: 7.2 channels, 125W per channel (8 ohms)
Audio Decoding: Dolby TrueHD, DTS-HD Master Audio, Dolby Atmos ready
HDMI: 8 inputs, 2 outputs (Main + Zone 2), 4K/60p upscaling
Network: Wi-Fi (802.11n), Ethernet, AirPlay, DLNA 1.5
Inputs/Outputs: 8 HDMI, 7 analog audio, 2 coaxial, 2 optical, phono
Room Correction: Audyssey MultEQ XT, Dynamic Volume, Dynamic EQ
Power Consumption: 650W maximum, 75W standby
Dimensions: 17.3" W × 6.4" H × 16.1" D
Weight: 28.7 lbs (13 kg)

Controls and Settings

Access menu via front panel or remote control. Front Panel: POWER, INPUT SELECT, VOLUME, SETUP, STATUS.

Remote: POWER, INPUT SELECT, VOLUME, MUTE, SETUP, OPTIONS, AUDIO, ZONE 2/3 controls.

Audio Settings: Speaker configuration, crossover settings, tone controls, Audyssey settings. Video Settings: Resolution, HDMI settings, video mode. Network Settings: Wi-Fi setup, firmware updates, streaming services. System Settings: GUI language, auto standby, trigger outputs.

Connecting Devices

HDMI: Primary connection for modern devices. Analog: For legacy components. Network: Ethernet or Wi-Fi.

Turn off receiver and devices before connecting.
Use high-speed HDMI cables for 4K content.
Assign inputs in setup menu for easy selection.
Connect speakers with proper polarity (+/-).

Tip: Label cables for easy identification during setup.

Network and Streaming

Supports AirPlay, internet radio, Spotify Connect, and DLNA streaming.

Network setup: Configure Wi-Fi or connect Ethernet cable.
Streaming services: Access via NET input selection.
AirPlay: Select receiver in iOS device AirPlay menu.
Internet radio: Browse stations by genre or location.
Firmware updates: Check for updates in network settings.

WARNING! Ensure stable network connection for streaming services.

Audio Calibration

Audyssey MultEQ XT room correction system for optimal sound.

Connect calibration microphone to front panel.
Position microphone at primary listening position.
Follow on-screen instructions for multiple measurements.
Save calibration results and adjust as needed.

CAUTION! Maintain quiet environment during calibration measurements.

Care & Maintenance

Unplug before cleaning. Use soft, dry cloth for exterior. Keep vents clear of dust.

CAUTION! Do not use liquid cleaners; avoid moisture near electrical components.

Regulatory Information

FCC Part 15: Class B digital device compliant. CE marked for European market. Copyright © 2012 Marantz; trademarks of Sound United LLC. For support, visit www.marantz.com or contact authorized service centers.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No sound from speakers	Input selection/volume	Check input source; ensure volume not muted; verify speaker connections.
No video output	HDMI connection/settings	Check HDMI cable; verify input assignment; try different HDMI port.
Network connection issues	Wi-Fi/Ethernet settings	Check network credentials; restart router; verify Ethernet connection.
Remote not working	Batteries/obstructions	Replace batteries; ensure line of sight to IR sensor.
Overheating	Ventilation blockage	Ensure adequate clearance around unit; clean ventilation ports.

Reset: Press and hold STATUS + TUNER PRESET CH + for 5 seconds.

Service: Contact authorized Marantz service center; www.marantz.com