marantz sr7005 manual download

The Marantz SR7005 is a high-performance 7.2 channel AV receiver featuring 125 watts per channel, advanced audio processing with Audyssey MultEQ XT, 4K video upscaling, extensive connectivity options including HDMI 1.4a with 3D support, network streaming capabilities, and multi-zone audio. Below are key sections for features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Network Features 8. Multi-Zone Operation 9. Care & Maintenance 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: 7.2 channel amplifier, Audyssey room correction, HDMI switching, network connectivity, multi-zone audio, remote control.

Feature	Description
Power Output	125W per channel (8 ohms, 20Hz-20kHz)
HDMI Ports	6 inputs, 2 outputs (HDMI 1.4a with 3D)
Audio Processing	Audyssey MultEQ XT, Dolby TrueHD, DTS-HD Master Audio
Network Features	Ethernet, Wi-Fi ready, internet radio, streaming
Multi-zone	Zone 2 and Zone 3 audio output
Video Processing	4K upscaling, analog to HDMI conversion
Connectivity	Component video, composite, optical/coaxial digital
Setup Assistant	Graphical on-screen setup menu
Remote Control	Backlit learning remote with macro functions
USB Port	Front panel USB for media playback

Installation

Unpack and inspect contents. Place in well-ventilated area.

Connect speakers: Use appropriate gauge speaker wire for all channels.
Connect video sources: Use HDMI for best quality; component/composite for legacy devices.
Connect audio sources: Use digital optical/coaxial for surround sound.
Network connection: Connect Ethernet cable or install Wi-Fi adapter.
Plug into AC power.

WARNING! Ensure adequate ventilation; do not block cooling vents. Unit may become hot during operation.

First-Time Setup

Power on receiver; follow on-screen setup assistant.

Run Audyssey setup: Connect included microphone; follow automatic room calibration.
Configure inputs: Assign sources to appropriate input buttons.
Network setup: Configure wired or wireless network connection.
Speaker configuration: Verify speaker sizes, distances, and levels.
Video settings: Configure resolution, aspect ratio, and video mode.

CAUTION! Use proper speaker impedance (6-16 ohms). Avoid short circuits in speaker wiring.

Specifications

Amplifier Section: 125W x 7 (8 ohms, 20Hz-20kHz, 0.08% THD)
Audio Formats: Dolby TrueHD, DTS-HD Master Audio, Dolby Digital Plus
Video Support: 4K upscaling, 3D pass-through, Deep Color
Connectivity: 6 HDMI in, 2 HDMI out, 8 analog audio, 7 digital audio
Network: Ethernet, optional Wi-Fi, DLNA 1.5 compatible
Multi-zone: Zone 2 pre-out, Zone 3 speaker outputs
Power Consumption: 650W maximum, 75W standby
Dimensions: 17.3" W x 6.8" H x 17.1" D
Weight: 31.1 lbs (14.1 kg)

Controls and Settings

Access OSD via SETUP button. Front Panel: POWER, INPUT SELECT, VOLUME, SETUP, USB.

Remote: POWER, INPUT SELECT, VOLUME, MUTE, SETUP, AUDIO, ZONE, PRESET.

Audio: Sound modes (Auto, Pure Direct, Stereo, Multi-channel), Audyssey settings, tone controls. Video: Resolution, aspect ratio, HDMI settings. Network: Internet radio, streaming services, firmware updates. System: Input assign, speaker configuration, multi-zone setup.

Connecting Devices

HDMI: Primary connection for audio/video. Analog: Component, composite, stereo audio. Digital: Optical, coaxial for surround sound.

Turn off all devices before connecting.
Use HDMI for modern sources (Blu-ray, game consoles, streaming devices).
Assign inputs via SETUP menu for easy selection.
Connect network for streaming and updates.

Tip: Use high-speed HDMI cables for 3D and 4K content.

Network Features

Supports internet radio, media streaming, and firmware updates.

Network connection: Connect Ethernet or install Wi-Fi adapter.
Internet radio: Access thousands of stations worldwide.
Media streaming: Play music from network shares and DLNA servers.
Firmware updates: Check for and install latest firmware.
Control apps: Use Marantz remote app for smartphone control.

WARNING! Ensure stable network connection for streaming. Update firmware for best performance.

Multi-Zone Operation

Zone 2 and Zone 3 audio output for whole-house audio.

Zone 2: Pre-amp outputs for second amplifier.
Zone 3: Speaker outputs for third zone.
Source selection: Different sources for main zone and secondary zones.
Volume control: Independent volume control for each zone.

Care & Maintenance

Unplug before cleaning. Use soft, dry cloth; avoid liquids and chemicals.

CAUTION! Do not block ventilation openings. Keep away from moisture and extreme temperatures.

Regulatory Information

Troubleshooting

Symptom	Possible Cause	Corrective Action
No sound	Input selection/speaker wires	Check input selection; verify speaker connections; ensure volume not muted.
No video	HDMI connection/settings	Check HDMI cables; verify input assignment; try different HDMI port.
Network not working	Connection/configuration	Check Ethernet cable; verify network settings; restart router.
Remote not responding	Batteries/obstructions	Replace batteries; ensure line of sight to IR sensor; check remote mode.
Overheating	Ventilation blockage	Ensure adequate ventilation; clear vents; reduce volume if necessary.

Reset: Press and hold STATUS and ENTER while powering on for factory reset.

Service: Contact authorized Marantz service center; www.marantz.com