marantz sr7000 manual pdf

The Marantz SR7000 is a high-performance AV receiver featuring Dolby Digital and DTS decoding, 6-channel amplification, multiple audio/video inputs, digital signal processing, and advanced surround sound capabilities. This comprehensive manual covers setup, operation, and troubleshooting for optimal home theater performance.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Audio Setup 8. Video Setup 9. Care & Maintenance 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: 6-channel amplifier, Dolby Digital/DTS decoder, Remote Control, Multiple audio/video inputs, Digital optical/coaxial inputs, Speaker terminals.

Feature	Description
Power Output	100W per channel (6 channels)
Audio Decoding	Dolby Digital, DTS, Pro Logic
Video Inputs	Composite, S-Video, Component
Audio Inputs	Analog, Digital Optical, Digital Coaxial
Speaker Terminals	6 channels with binding posts
Tuner	AM/FM with 40 station presets
Remote Control	Learning remote with macro functions
DSP Modes	Hall, Theater, Stadium, etc.
Headphone Jack	Front panel for private listening
AC Power	120V AC, 60Hz operation

Installation

Unpack and inspect all components. Place receiver in well-ventilated area.

Connect speakers: Use appropriate gauge wire for front, center, surround channels.
Connect audio sources: CD player, DVD player, tape deck to corresponding inputs.
Connect video sources: DVD player, cable box, gaming console to video inputs.
Connect antenna: AM loop and FM wire antennas to designated terminals.
Plug into AC power outlet.

WARNING! Ensure proper ventilation; do not block vents. Use correct speaker impedance.

First-Time Setup

Power on receiver; follow on-screen display or front panel indicators.

Speaker configuration: Set speaker sizes (Large/Small) and distances.
Input assignment: Assign digital inputs to corresponding sources.
Tuner setup: Auto-scan and store AM/FM stations.
Surround mode: Select default listening mode (Dolby Digital, DTS, etc.).
Test tones: Use built-in test tone generator for speaker level calibration.

CAUTION! Ensure all connections are secure before powering on.

Specifications

Power Output: 100W x 6 channels (8 ohms, 20Hz-20kHz)
Frequency Response: 20Hz-20kHz (+0.5/-3 dB)
Signal-to-Noise Ratio: 100 dB (line level)
Total Harmonic Distortion: 0.05% (rated power)
Digital Inputs: 3 optical, 2 coaxial
Analog Inputs: 6 line-level, phono, tape
Video Inputs: 3 composite, 3 S-Video, 2 component
Speaker Impedance: 6-16 ohms
Power Consumption: 500W maximum
Dimensions: 17-1/8" W x 6-3/4" H x 16" D
Weight: 28.7 lbs

Controls and Settings

Front Panel: POWER, INPUT SELECT, VOLUME, TONE controls, HEADPHONE jack.

Remote: POWER, INPUT SELECT, VOLUME, MUTE, SURROUND MODE, numerical keys, transport controls.

Audio Settings: Bass, Treble, Balance, Loudness, Speaker levels, Crossover frequency. Video Settings: Input assignment, Output resolution. Tuner: Preset memory, Auto scan, Manual tuning. System: Speaker configuration, Delay times, Test tones.

Connecting Devices

Audio Sources: CD player, tape deck, turntable (phono). Video Sources: DVD player, cable box, gaming console.

Turn off all components before connecting.
Use high-quality cables for best performance.
Match input types (digital to digital, analog to analog).
Assign digital inputs in setup menu for proper decoding.
Connect video monitor to monitor output.

Tip: Use component video for high-definition sources when available.

Audio Setup

Advanced audio configuration for optimal surround sound.

Speaker Configuration: Set front, center, surround speakers to Large or Small.
Distance Settings: Input distance from listening position to each speaker.
Channel Levels: Adjust individual speaker levels using test tones.
Crossover: Set bass management crossover frequency (80Hz typical).
Surround Modes: Select Dolby Digital, DTS, Pro Logic, or DSP modes.
Night Mode: Compress dynamic range for late-night listening.

WARNING! Do not connect speakers with impedance lower than 6 ohms.

Video Setup

Video source configuration and output settings.

Input Assignment: Assign video inputs to corresponding sources.
Output Resolution: Set composite/S-video output resolution.
Component Video: Configure component video inputs for progressive scan sources.
OSD Setup: Adjust on-screen display position and transparency.
Video Conversion: Enable/disable composite to S-video conversion.

Care & Maintenance

Unplug unit before cleaning. Use soft, dry cloth only; avoid liquids and aerosols.

Keep unit in well-ventilated area away from heat sources and moisture.

CAUTION! Do not block ventilation openings. Allow adequate space around unit.

Regulatory Information

FCC Part 15: Class B digital device compliant. CE marked for European markets. Manufactured under license from Dolby Laboratories. DTS and DTS Digital Surround are registered trademarks. For technical support, contact Marantz America at 1-800-270-2900 or visit www.marantz.com.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No sound	Input selection, mute, speaker connections	Check input selection, mute status, speaker wires
No video	Input selection, cable connections	Verify input selection, check video cables
Remote not working	Batteries, obstacles, distance	Replace batteries, clear line of sight, reduce distance
No surround sound	Source material, mode selection	Ensure digital source, select proper surround mode
Overheating	Ventilation, impedance mismatch	Improve ventilation, check speaker impedance
Tuner no reception	Antenna connection, location	Check antenna connections, reposition antenna

Reset: Press and hold TUNER PRESET + SPEAKER A while powering on for factory reset.

Service: 1-800-270-2900; www.marantz.com