marantz sr6006 manual download

The Marantz SR6006 is a high-performance 7.2 channel AV receiver featuring 110W per channel, advanced audio processing with Audyssey MultEQ XT, 4K video upscaling, multi-zone capability, network streaming with AirPlay, built-in Wi-Fi and Ethernet, HDMI connectivity with 8 inputs and 2 outputs, and support for Dolby TrueHD and DTS-HD Master Audio. Below are key sections for features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Network and Streaming 8. Multi-Zone Operation 9. Care & Maintenance 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: 7.2 channel amplifier, Network connectivity, HDMI switching, Audyssey room correction, Multi-zone audio/video.

Feature	Description
Power Output	110W per channel (8 ohms, 20Hz-20kHz)
HDMI Inputs	8 inputs with 4K upscaling
Network Audio	AirPlay, internet radio, DLNA streaming
Audio Processing	Audyssey MultEQ XT, Dynamic Volume, Dynamic EQ
Multi-zone	Zone 2 and Zone 3 audio/video capability
Wireless	Built-in Wi-Fi and Bluetooth ready
Audio Formats	Dolby TrueHD, DTS-HD Master Audio, FLAC, WAV
Video Processing	4K/30p upscaling, 3D pass-through
Setup Assistant	On-screen guided configuration
Remote Control	Learning remote with backlight

Installation

Unpack and inspect contents. Place in well-ventilated area.

Connect speakers: Use appropriate gauge speaker wire for each channel.
Connect source devices: Use HDMI cables for optimal audio/video quality.
Connect TV: Use HDMI OUT MAIN to television.
Connect network: Use Ethernet cable or configure Wi-Fi.
Plug into AC power.

WARNING! Ensure adequate ventilation; do not block air vents. Unit may become hot during operation.

First-Time Setup

Power on receiver; follow on-screen setup assistant.

Run Audyssey setup: Connect included microphone and follow prompts.
Configure inputs: Assign source names to HDMI inputs.
Set network connection: Configure Wi-Fi or Ethernet settings.
Adjust audio settings: Set crossover, speaker sizes, and distances.
Configure video: Set resolution and video mode preferences.

CAUTION! Use proper speaker impedance matching. Do not short-circuit speaker terminals.

Specifications

Amplifier Section: 7.2 channels, 110W per channel (8 ohms)
Frequency Response: 10Hz-100kHz (+1/-3dB)
HDMI: 8 inputs, 2 outputs (Main/Sub), 4K upscaling
Network: Built-in Wi-Fi, Ethernet, AirPlay, DLNA 1.5
Audio Decoding: Dolby TrueHD, DTS-HD Master Audio
Room Correction: Audyssey MultEQ XT, Dynamic Volume/EQ
Multi-zone: Zone 2 and Zone 3 capable
Power Consumption: 650W maximum, 65W standby
Dimensions: 17.3" W × 6.4" H × 15.7" D
Weight: 26.5 lbs

Controls and Settings

Access menu system via front panel or remote control. Front Panel: POWER, INPUT SELECT, VOLUME, SETUP, TONE.

Remote: POWER, INPUT SELECT, VOLUME, MUTE, SETUP, OPTIONS, AUDIO, STATUS.

Audio Settings: Speaker configuration, crossover, distance, level calibration. Video Settings: Resolution, HDMI control, video mode. Network Settings: Wi-Fi setup, network standby, firmware update. System Settings: GUI language, OSD display, auto standby.

Connecting Devices

HDMI: Connect Blu-ray players, gaming consoles, streaming devices. Analog: Connect CD players, turntables (with phono preamp). Network: Ethernet or Wi-Fi for streaming services.

Turn off all devices before connecting.
Use high-speed HDMI cables for 4K content.
Assign appropriate input names in setup menu.
Enable HDMI Control for system integration.

Tip: Use the setup microphone for optimal speaker calibration and room correction.

Network and Streaming

Supports AirPlay, internet radio, DLNA streaming from network servers.

Network setup: Configure Wi-Fi or connect Ethernet cable.
Streaming services: Access internet radio, Spotify Connect, Pandora.
AirPlay: Stream audio from iOS devices directly.
DLNA: Play music from network storage devices.
Firmware updates: Check for updates via network connection.

WARNING! Ensure stable network connection for optimal streaming performance.

Multi-Zone Operation

Zone 2 and Zone 3 audio/video distribution to additional rooms.

Zone 2 setup: Assign source and configure speaker outputs.
Zone 3 setup: Additional zone for whole-house audio.
Independent control: Each zone can play different sources.
Volume control: Separate volume settings for each zone.

Care & Maintenance

Unplug before cleaning. Use soft, dry cloth for exterior. Keep ventilation openings clear of dust.

CAUTION! Do not use liquid cleaners or aerosols. Avoid moisture and extreme temperatures.

Regulatory Information

Troubleshooting

Symptom	Possible Cause	Corrective Action
No sound	Input selection/speaker wires	Check input source; verify speaker connections; ensure volume not muted.
No video	HDMI connection/settings	Verify HDMI cable connections; check input assignment; try different HDMI port.
Network not connecting	Wi-Fi settings/router	Check network credentials; restart router; verify Ethernet connection.
Remote not working	Batteries/obstructions	Replace batteries; ensure clear line of sight to IR sensor.
Overheating	Ventilation blocked	Ensure adequate ventilation; clear air vents; reduce volume levels.

Reset: Press and hold STATUS and TONE buttons while powering on for factory reset.

Service: 1-800-370-3744; www.marantz.com