Marantz SR6006 AV Receiver Manual

The Marantz SR6006 is a high-performance 7.2 channel AV receiver featuring 110W per channel, Dolby TrueHD and DTS-HD Master Audio decoding, Audyssey MultEQ XT room calibration, 8 HDMI inputs (1 front), 4K video upscaling, network connectivity with AirPlay and internet radio, multi-zone audio, and advanced audio processing. Below are key sections for setup, features, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Network Features 8. Multi-Zone Operation 9. Care & Maintenance 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: 7.2 channel amplifier, HDMI switching, network connectivity, multi-zone capability, Audyssey room correction.

Feature	Description
Power Output	110W per channel (8 ohms, 20Hz-20kHz)
HDMI Inputs	8 inputs (7 rear, 1 front) with 4K upscaling
Audio Decoding	Dolby TrueHD, DTS-HD Master Audio
Room Correction	Audyssey MultEQ XT
Network Features	AirPlay, internet radio, DLNA streaming
Multi-zone	Zone 2 and Zone 3 audio output
Front Panel Inputs	HDMI, USB, 3.5mm audio
Remote Control	RC025SR learning remote
Display	Fluorescent display with dimmer control
Setup Assistant	Guided on-screen setup process

Installation

Unpack and inspect contents. Ensure proper ventilation around receiver.

Connect speakers: Match polarity (+/-) for all 7 channels plus subwoofer.
Connect HDMI sources: Use HDMI inputs for Blu-ray, gaming consoles, etc.
Connect TV: HDMI OUT to television ARC port.
Connect network: Ethernet cable to router or use built-in Wi-Fi.
Plug into AC power.

WARNING! Ensure adequate ventilation; do not block cooling vents. Use proper gauge speaker wire.

First-Time Setup

Power on receiver; follow on-screen Setup Assistant.

Run Audyssey calibration: Connect included microphone and follow prompts.
Configure inputs: Assign names and settings to each source.
Set network connection: Configure Wi-Fi or Ethernet settings.
Adjust audio settings: Set crossover, speaker sizes, distances.
Configure video: Set resolution and video processing options.

CAUTION! During Audyssey calibration, ensure complete silence for accurate measurements.

Specifications

Amplifier: 7.2 channels, 110W per channel (8 ohms)
HDMI: 8 inputs, 2 outputs (Main/Zone2), 4K upscaling
Audio Formats: Dolby TrueHD, DTS-HD Master Audio, Dolby Digital Plus
Network: Ethernet, built-in Wi-Fi, AirPlay, DLNA 1.5
Multi-zone: Zone 2 and Zone 3 capable
Inputs: 8 HDMI, 6 analog audio, 2 optical, 2 coaxial digital
Outputs: 7.2 pre-outs, Zone 2/3 line outputs
Power Consumption: 650W maximum
Dimensions: 17.3" W x 6.4" H x 15.7" D
Weight: 26.5 lbs

Controls and Settings

Access menu via front panel or remote control. Front Panel: POWER, INPUT SELECT, VOLUME, SETUP, TONE.

Remote: POWER, INPUT SELECT, VOLUME, MUTE, SETUP, AUDIO, MOVIE, MUSIC, ZONE2/ZONE3.

Audio: Sound modes (Auto, Pure Direct, Stereo, Multi-channel), tone controls, Audyssey settings. Video: Resolution, HDMI settings, video mode. Network: Internet radio presets, firmware updates. System: Speaker configuration, input assignment, network settings.

Connecting Devices

HDMI: Primary connection for audio/video. Analog: For legacy devices. Network: Ethernet or Wi-Fi.

Turn off receiver and devices before connecting.
Use high-speed HDMI cables for 4K content.
Assign inputs in setup menu for easy selection.
Connect subwoofer via LFE or line-level inputs.

Tip: Use HDMI Control (CEC) for single remote operation of compatible devices.

Network Features

Supports streaming audio, internet radio, and firmware updates.

Network setup: Configure via SETUP menu (wired or wireless).
Internet radio: Access thousands of stations worldwide.
AirPlay: Stream from Apple devices directly.
DLNA: Stream from network media servers.
Firmware updates: Download latest features and fixes.
Remote app: Control receiver with Marantz remote app.

WARNING! Ensure stable network connection for best streaming performance.

Multi-Zone Operation

Zone 2 and Zone 3 allow independent audio playback in different rooms.

Zone 2 setup: Connect speakers or amplifier to Zone 2 outputs.
Source selection: Different sources can play in main zone and Zone 2/3.
Volume control: Independent volume control for each zone.
Configuration: Set up in SETUP menu under Multi-zone settings.

Care & Maintenance

Unplug before cleaning. Use soft, dry cloth for exterior. Keep vents clear of dust.

CAUTION! Do not use liquid cleaners; avoid moisture near ventilation openings.

Regulatory Information

FCC Part 15: Class B digital device compliant. CE marked for European market. Copyright © Marantz America, Inc. For support, visit www.marantz.com or contact 1-800-270-2744. Manufactured under license from Dolby Laboratories.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No sound	Input selection/speaker wires	Check input selection; verify speaker connections; ensure not muted.
No video	HDMI connection/settings	Verify HDMI cables; check TV input selection; reset HDMI handshake.
Network not connecting	Wi-Fi/Ethernet settings	Check network credentials; verify router connection; restart receiver.
Remote not working	Batteries/obstructions	Replace batteries; ensure clear line of sight to IR sensor.
Overheating	Ventilation blockage	Ensure adequate ventilation; clear vents of dust and obstructions.

Reset: Press TONE + STATUS while powering on for factory reset.

Service: 1-800-270-2744; www.marantz.com