Marantz SR6005 Manual PDF

The Marantz SR6005 is a high-performance 7.2-channel AV receiver featuring 125 watts per channel, HDMI 1.4a support with 3D and Audio Return Channel, Audyssey MultEQ XT room calibration, network connectivity with internet radio and streaming services, multi-zone audio capabilities, and advanced audio processing including Dolby TrueHD and DTS-HD Master Audio. Below are key sections covering setup, features, operation, connectivity, and troubleshooting.

1. Features at a Glance 2. Installation & Setup 3. First-Time Configuration 4. Technical Specifications 5. Controls and Functions 6. Connectivity Options 7. Network Features 8. Audio Settings 9. Maintenance 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: 7.2-channel amplifier, HDMI switching, network audio streaming, Audyssey room correction, multi-zone audio capability.

Feature	Description
Power Output	125W per channel (8 ohms, 20Hz-20kHz, 0.08% THD)
HDMI Ports	6 inputs, 1 output (HDMI 1.4a with 3D and ARC)
Network Connectivity	Ethernet and optional WiFi adapter
Audio Decoding	Dolby TrueHD, DTS-HD Master Audio
Room Correction	Audyssey MultEQ XT auto setup
Multi-zone	Zone 2 and Zone 3 audio output
Streaming Services	Internet radio, Pandora, Spotify Connect
Front Panel Inputs	HDMI, USB, composite video, analog audio
Remote Control	Learning remote with backlight
Display	Fluorescent display with dimmer control

Installation & Setup

Unpack and inspect all components. Place receiver in well-ventilated area.

Connect speakers: Match polarity (+/-) and impedance (6-16 ohms).
Connect HDMI sources: Use HDMI inputs for Blu-ray players, gaming consoles, etc.
Connect TV: Use HDMI OUT to main display with Audio Return Channel support.
Connect network: Ethernet cable for network features or optional WiFi adapter.
Connect power: Use supplied power cord to AC outlet.

WARNING! Ensure adequate ventilation around receiver to prevent overheating. Do not block ventilation slots.

First-Time Configuration

Power on receiver; follow on-screen setup assistant.

Run Audyssey setup: Connect included microphone; follow auto calibration prompts.
Configure inputs: Assign source names to HDMI and analog inputs.
Set network connection: Configure wired or wireless network settings.
Configure audio settings: Set speaker sizes, distances, crossover frequencies.
Update firmware: Check for latest firmware via network connection.

CAUTION! During Audyssey setup, ensure complete silence for accurate measurements.

Technical Specifications

Amplifier Section: 125W x 7 (8 ohms, 20Hz-20kHz, 0.08% THD)
HDMI: 6 in / 1 out, version 1.4a, 3D, ARC, Deep Color
Video Conversion: Analog to HDMI upscaling to 1080p
Audio Formats: Dolby TrueHD, DTS-HD Master Audio, Dolby Digital Plus
Network Audio: MP3, WMA, AAC, FLAC, WAV, ALAC
Multi-zone: Zone 2 pre-out, Zone 3 speaker output
Power Consumption: 650W maximum, 75W standby
Dimensions: 440 x 427 x 171 mm (W x D x H)
Weight: 12.8 kg

Controls and Functions

Front Panel: POWER, INPUT SELECT, VOLUME, SETUP, TONE, AUDIO SEL, PHONES.

Remote Control: POWER, INPUT SELECT, VOLUME, MUTE, SETUP, AUDIO, ZONE, numeric keys, navigation keys.

Setup Menu: Input Setup, Speaker Setup, Audio Setup, Video Setup, Network Setup, System Setup. Audio Settings: Tone control, Audyssey modes (Movie, Music, Game), Dynamic EQ, Dynamic Volume. Video Settings: Resolution, HDMI settings, video mode. Network Settings: IP configuration, service setup, firmware update.

Connectivity Options

Rear panel connections: HDMI 1-6 inputs, HDMI OUT, component video, composite video, analog audio, phono input, multi-channel input, speaker terminals, Ethernet, RS-232C.

Turn off all components before making connections.
Use high-quality HDMI cables for best performance.
Connect subwoofer to SUBWOOFER 1 or 2 pre-out.
Use Zone 2 pre-out for second room audio system.

Tip: Label cables for easy identification during setup.

Network Features

Supports internet radio, streaming services, and network audio playback.

Network connection: Connect Ethernet cable or install WiFi adapter.
Internet radio: Access thousands of stations worldwide.
Streaming services: Pandora, Spotify Connect, last.fm.
Network audio: Play music from NAS drives or PC shares.
Control: Use Marantz Remote App for iOS/Android.
Firmware updates: Download and install via network.

WARNING! Ensure stable network connection for streaming services.

Audio Settings

Audyssey MultEQ XT: Auto room calibration with included microphone. Manual Settings: Speaker configuration, distance, level, crossover. Sound Modes: Dolby Surround, DTS Neo:6, Stereo, Direct, Pure Direct. Tone Controls: Bass, treble, balance. Late Night Mode: Dynamic volume for low-level listening.

Maintenance

Unplug from power before cleaning. Use soft, dry cloth for exterior. Do not use chemicals or abrasive cleaners.

CAUTION! Keep away from moisture and extreme temperatures. Ensure proper ventilation.

Regulatory Information

FCC Part 15 Class B compliant. CE marked. RoHS compliant. Manufactured under license from Dolby Laboratories. DTS and DTS-HD are registered trademarks. Audyssey Laboratories technology licensed. For support, visit www.marantz.com or contact authorized service centers.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No sound from speakers	Speaker connections/input selection	Check speaker wires; verify input source; check volume level.
No video through HDMI	HDMI cable/input selection	Ensure HDMI cable properly connected; select correct input.
Network connection failed	Network settings/cable	Check Ethernet cable; verify network settings; restart router.
Remote control not working	Batteries/obstructions	Replace batteries; ensure clear line of sight to receiver.
Overheating protection	Insufficient ventilation	Ensure adequate space around receiver; check ventilation.

Reset: Press and hold STATUS and ENTER while powering on for factory reset.

Service: Contact authorized Marantz service center; www.marantz.com