marantz sr6004 manual download

The Marantz SR6004 is a high-performance AV receiver featuring 7.2 channel amplification, 1080p upscaling, HDMI connectivity with 4 inputs and 1 output, Dolby TrueHD and DTS-HD Master Audio decoding, Audyssey MultEQ auto calibration, network streaming capabilities, and multi-zone functionality. Below are key sections for features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Network Setup 8. Audio Calibration 9. Care & Maintenance 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: 7.2 channel amplifier, HDMI switching, network connectivity, Audyssey room correction, multi-zone audio.

Feature	Description
HDMI Inputs	4 HDMI inputs with 1080p upscaling
Audio Decoding	Dolby TrueHD, DTS-HD Master Audio
Network Streaming	Ethernet and USB connectivity
Power Output	110W per channel (8 ohms, 20Hz-20kHz)
Audyssey MultEQ	Auto room acoustic calibration
Multi-zone	Zone 2 audio output capability
Video Processing	Faroudja DCDi Cinema
Inputs/Outputs	Component video, composite, digital audio
Remote Control	Learning remote with backlight
Setup Assistant	On-screen setup guidance

Installation

Unpack and inspect contents. Place in well-ventilated area.

Connect speakers: Match polarity (+/-) for all channels.
Connect HDMI sources: Use HDMI inputs for Blu-ray, gaming consoles, etc.
Connect TV: Use HDMI OUT to television.
Connect subwoofer: Use subwoofer pre-outs for .2 channel bass.
Plug into AC power.

WARNING! Ensure adequate ventilation; do not block cooling vents. Use proper gauge speaker wire.

First-Time Setup

Power on receiver; follow on-screen setup assistant.

Run Audyssey calibration: Connect included microphone and follow prompts.
Configure inputs: Assign sources to HDMI inputs.
Set speaker configuration: Small/Large, crossover frequencies.
Network setup: Connect Ethernet or configure wireless if available.
Test all inputs and outputs.

CAUTION! Use stable power source; avoid power surges.

Specifications

Amplifier Section: 7.2 channels, 110W per channel (8 ohms)
HDMI: 4 inputs, 1 output, 1080p upscaling
Audio Formats: Dolby TrueHD, DTS-HD Master Audio, Dolby Digital Plus
Video Processing: Faroudja DCDi Cinema, 1080p upscaling
Network: Ethernet, USB port, streaming capabilities
Inputs: 6 analog audio, 4 digital optical, 2 digital coaxial
Outputs: 7.2 pre-outs, Zone 2 line out
Power Consumption: 650W maximum
Dimensions: 17.3" W x 6.4" H x 15.7" D
Weight: 26.5 lbs

Controls and Settings

Access OSD via SETUP button. Front Panel: POWER, INPUT SELECT, VOLUME, SETUP, STATUS.

Remote: POWER, INPUT SELECT, VOLUME, MUTE, SETUP, AUDIO, ZONE 2, PRESET, CURSOR buttons.

Audio Settings: Speaker configuration, distance, level calibration, crossover. Video Settings: Resolution, HDMI control, video mode. Network Settings: IP configuration, streaming services. System Settings: OSD language, firmware update.

Connecting Devices

HDMI: Primary connection for modern sources. Analog: For legacy components. Network: Ethernet for streaming.

Turn off all devices before connecting.
Use high-speed HDMI cables for best performance.
Assign inputs logically (BD for Blu-ray, GAME for console, etc.)
Connect network cable for firmware updates and streaming.

Tip: Label cables for easy identification during setup.

Network Setup

Supports streaming audio and firmware updates.

Wired connection: Connect Ethernet cable to router.
Wireless setup: Use optional wireless adapter if available.
Network configuration: Auto IP or manual setup.
Streaming services: Access internet radio, music services.
Firmware updates: Check for latest version periodically.

WARNING! Ensure stable network connection for streaming. Keep firmware updated.

Audio Calibration

Audyssey MultEQ auto calibration for optimal sound.

Place microphone at primary listening position.
Run auto setup from menu.
Take measurements from multiple positions.
Review and adjust settings as needed.
Save configuration.

Note: Perform calibration in quiet environment for best results.

Care & Maintenance

Unplug before cleaning. Use soft, dry cloth only; no liquids or chemicals.

CAUTION! Do not block ventilation ports. Keep away from moisture and extreme temperatures.

Regulatory Information

FCC Part 15: Class B digital device compliant. CE marked for European market. Copyright © Marantz America, Inc. For support, visit www.marantz.com or contact customer service. Disposal: Follow local electronic waste regulations.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No sound	Input selection/volume	Check input source; ensure volume not muted; verify speaker connections.
No video	HDMI connection	Check HDMI cable; verify TV input selection; try different HDMI input.
Network not working	Cable/configuration	Check Ethernet cable; verify network settings; restart router.
Remote not responding	Batteries/obstacles	Replace batteries; ensure clear line of sight to IR sensor.
Overheating	Ventilation	Ensure adequate ventilation; clear vents of obstructions.

Reset: Press and hold STATUS and SURROUND MODE while powering on for factory reset.

Service: Contact authorized Marantz service center for repairs.