Marantz SR6000 Manual

The Marantz SR6000 is a high-performance AV receiver featuring Dolby Digital and DTS decoding, 6-channel amplification, multiple audio/video inputs, digital optical/coaxial inputs, AM/FM tuner, speaker setup calibration, remote control, and advanced audio processing. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: 6-channel amplifier, Dolby Digital/DTS decoder, multiple input/output terminals, remote control, setup microphone.

Feature	Description
Power Output	100W per channel (6 ohms, 1kHz)
Audio Decoding	Dolby Digital, DTS, Pro Logic
Inputs	6 audio/video, 2 digital optical, 1 coaxial
Outputs	6-channel pre-out, subwoofer, monitor out
Tuner	AM/FM with 30 station presets
Speaker Setup	Auto calibration with included microphone
Remote Control	Learning remote with macro functions
Display	Fluorescent display with dimmer
Power Consumption	280W maximum
Dimensions	440mm x 151mm x 388mm (WxHxD)

Installation

Unpack and inspect contents. Place in well-ventilated area.

1. Connect speakers: Match polarity (+/-) for all channels.
2. Connect audio sources: Use appropriate input jacks for each device.
3. Connect video sources: Component, composite, or S-video inputs.
4. Connect subwoofer: Use subwoofer pre-out if applicable.
5. Plug into AC power.

WARNING! Ensure proper ventilation; do not block ventilation holes. Use correct speaker impedance.

First-Time Setup

Power on receiver; follow on-screen display or front panel indicators.

1. Auto speaker setup: Connect calibration microphone; run auto setup.
2. Manual speaker settings: Adjust distance, level, and crossover if needed.
3. Input assignment: Assign digital inputs to specific sources.
4. Tuner setup: Auto-scan and store radio stations.
5. Set volume limit: Configure maximum volume if desired.

CAUTION! Disconnect power before making connections. Ensure stable placement.

Specifications

• Amplifier Section: 6 channels, 100W per channel (6 ohms)
• Frequency Response: 20Hz - 20kHz (±0.5dB)
• Signal-to-Noise Ratio: 100dB (line input)
• Total Harmonic Distortion: 0.05% (1kHz)
• Input Sensitivity: 200mV (line), 2.5mV (MM phono)
• Digital Inputs: 2 optical, 1 coaxial
• Video Inputs: 3 composite, 2 S-video, 2 component
• Power Requirements: AC 120V, 60Hz
• Weight: 10.5 kg

Controls and Settings

Front Panel: POWER, INPUT SELECT, VOLUME, TUNER PRESETS, SETUP, HEADPHONE JACK.

Remote: POWER, INPUT SELECT, VOLUME, MUTE, SURROUND MODE, TUNER, SETUP, NUMERIC KEYS.

Audio Settings: Speaker configuration, distance, level, crossover, tone controls. Video Settings: Input assignment, output resolution. Tuner Settings: Auto/manual tuning, preset memory. System Settings: Volume limit, display dimmer, remote codes.

Connecting Devices

Audio Sources: CD player, turntable, tape deck, digital sources. Video Sources: DVD player, cable/satellite, gaming console.

1. Turn off all devices before connecting.
2. Use high-quality cables for best performance.
3. Match input types (analog/digital) to source capabilities.
4. Assign inputs in setup menu for easy selection.

Tip: Use digital connections for best audio quality with compatible sources.

Audio Setup

Advanced audio configuration for optimal performance.

1. Speaker configuration: Set size (large/small) for each channel.
2. Distance settings: Input distance from listening position for each speaker.
3. Level calibration: Adjust output level for each channel using test tone.
4. Crossover settings: Set bass management crossover frequency.
5. Surround modes: Select Dolby Digital, DTS, or Pro Logic as needed.
6. Night mode: Enable dynamic range compression for late-night viewing.

WARNING! Avoid extreme volume levels that could damage speakers or hearing.

Remote Control

Learning remote with macro programming capabilities.

Basic Functions: Power, volume, input selection, surround modes. Advanced Features: Learning function for other devices, macro programming for multiple commands, direct access keys for frequently used functions.

Programming: Follow manual instructions for learning and macro setup. Use fresh batteries for optimal performance.

Care & Maintenance

Unplug before cleaning. Use soft, dry cloth for exterior. Keep away from moisture and extreme temperatures.

CAUTION! Do not use liquid cleaners or aerosols. Ensure proper ventilation during operation.

Regulatory Information

FCC Part 15: Class B digital device compliant. CE marked for European compliance. Copyright © Marantz. For support, visit www.marantz.com or contact authorized service centers.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power	Power cord/outlet	Check power connection; try different outlet; check fuse.
No sound	Input selection/speakers	Verify input selection; check speaker connections; adjust volume.
Poor sound quality	Settings/connections	Run auto setup; check cable quality; verify source quality.
Remote not working	Batteries/obstructions	Replace batteries; ensure line of sight; check remote mode.
Overheating	Ventilation	Ensure adequate ventilation; reduce volume if necessary.

Reset: Press and hold TUNER PRESET + TUNER MODE while powering on for factory reset.

Service: Contact authorized Marantz service center; www.marantz.com