marantz sr5007 user manual pdf

The Marantz SR5007 is a high-performance 7.2 channel AV receiver featuring 125W per channel, 4K/3D video pass-through, AirPlay, internet radio, Audyssey MultEQ XT room calibration, multi-zone audio, and extensive connectivity options including HDMI, component video, composite video, and digital audio inputs. Below are key sections for features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Network Features 8. Multi-Zone Operation 9. Care & Maintenance 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: 7.2 channel amplifier, Remote Control, HDMI inputs/outputs, network connectivity, Audyssey calibration microphone, multi-zone outputs.

Feature	Description
Power Output	125W per channel (8 ohms, 20Hz-20kHz)
HDMI Inputs	6 inputs with 4K/3D pass-through
Network Connectivity	Ethernet and Wi-Fi ready
Audio Formats	Dolby TrueHD, DTS-HD Master Audio
Room Calibration	Audyssey MultEQ XT
Multi-zone	Zone 2 and Zone 3 audio output
AirPlay	Wireless audio streaming from Apple devices
Internet Radio	Access to thousands of stations
Front Panel Inputs	USB, HDMI, analog audio
Remote Control	Learning remote with backlight

Installation

Unpack and inspect contents. Place in well-ventilated area.

Connect speakers: Use appropriate gauge speaker wire for each channel.
Connect video sources: Use HDMI inputs for best quality; component/composite for legacy devices.
Connect network: Ethernet cable for stable connection or Wi-Fi adapter.
Connect subwoofer: Use LFE output for powered subwoofers.
Plug into AC power.

WARNING! Ensure adequate ventilation; do not block vents. Allow space for heat dissipation.

First-Time Setup

Power on receiver; follow on-screen setup assistant.

Run Audyssey calibration: Connect microphone, follow on-screen instructions for optimal sound.
Configure inputs: Assign sources to HDMI inputs in setup menu.
Set network connection: Configure wired or wireless network settings.
Configure audio settings: Set speaker sizes, distances, and crossover frequencies.
Update firmware: Check for latest firmware updates via network.

CAUTION! Use proper speaker impedance matching. Ensure all connections are secure.

Specifications

Amplifier Section: 7.2 channels, 125W per channel (8 ohms)
Frequency Response: 10Hz-100kHz (+1/-3dB)
HDMI: 6 inputs, 2 outputs (Main+Zone2), 4K/3D pass-through
Video Conversion: Analog to HDMI upscaling to 1080p
Network Features: AirPlay, internet radio, streaming services
Room Correction: Audyssey MultEQ XT, Dynamic Volume, Dynamic EQ
Multi-zone: Zone 2 and Zone 3 capable
Power Consumption: 650W maximum
Dimensions: 17.3" W x 6.3" H x 15.7" D
Weight: 24.7 lbs

Controls and Settings

Access OSD via SETUP button. Front Panel: POWER, INPUT SELECT, VOLUME, TONE, SPEAKERS.

Remote: POWER, INPUT SELECT, VOLUME, MUTE, SETUP, OPTIONS, AUDIO, ZONE2, ZONE3.

Audio Settings: Speaker configuration, crossover, distance, level calibration. Video Settings: Resolution, HDMI setup, video mode. Network Settings: IP configuration, service setup. System Settings: GUI language, firmware update, reset options.

Connecting Devices

HDMI: Primary connection for modern devices. Component/Composite: Legacy video devices. Analog Audio: CD players, turntables (with phono preamp).

Turn off receiver and devices before connecting.
Use high-speed HDMI cables for 4K/3D content.
Assign inputs in setup menu for easy selection.
Connect network via Ethernet or Wi-Fi adapter.

Tip: Label cables for easy identification during setup.

Network Features

Supports AirPlay, internet radio, and streaming services.

Network setup: Configure wired or wireless connection in network menu.
AirPlay: Enable in network settings for Apple device streaming.
Internet Radio: Access via network audio menu; save presets.
Firmware updates: Check automatically or manually via network.
Remote app: Use Marantz remote app for iOS/Android control.

WARNING! Ensure stable network connection for streaming services.

Multi-Zone Operation

Zone 2 and Zone 3 audio distribution with independent source selection.

Zone setup: Configure in speaker setup menu.
Source selection: Different sources for main zone and secondary zones.
Volume control: Independent volume control for each zone.
Power management: Zones can be powered on/off independently.

Care & Maintenance

Unplug before cleaning. Use soft, dry cloth for exterior. Keep vents clear of dust.

CAUTION! Do not use liquid cleaners. Avoid moisture near ventilation openings.

Regulatory Information

FCC Part 15: Class B digital device compliant. CE marked for European market. Manufactured under license from Dolby Laboratories and DTS. For support, visit www.marantz.com or contact authorized service centers.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No sound	Input selection/speaker settings	Check input source; verify speaker configuration; run Audyssey calibration.
No video	HDMI connection/settings	Check HDMI cables; verify input assignment; try different HDMI input.
Network not connecting	Network settings/cables	Verify network settings; check Ethernet cable; restart router.
Remote not working	Batteries/obstructions	Replace batteries; ensure clear line of sight to IR sensor.
Overheating	Ventilation blockage	Ensure adequate ventilation; clear vents of dust and obstructions.

Reset: Press and hold STATUS and TUNER PRESET CH - for 5 seconds.

Service: Authorized Marantz service centers; www.marantz.com