Marantz SR5005 Owners Manual

The Marantz SR5005 is a high-performance AV receiver featuring 7.1 channel surround sound, 125 watts per channel, HDMI connectivity with 4K upscaling, Audyssey MultEQ auto calibration, network streaming capabilities, multi-room audio, and support for various audio formats including Dolby TrueHD and DTS-HD Master Audio. Below are key sections for setup, operation, connectivity, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Network Setup 8. Audio Calibration 9. Care & Maintenance 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: 7.1 channel amplifier, HDMI inputs/outputs, network connectivity, Audyssey calibration microphone, remote control, multi-zone capability.

Feature	Description
HDMI Inputs	6 HDMI inputs with 4K upscaling capability
Audio Power	125 watts per channel (8 ohms, 20Hz-20kHz)
Network Connectivity	Ethernet and Wi-Fi for streaming services
Audio Formats	Dolby TrueHD, DTS-HD Master Audio, Dolby Atmos
Multi-room Audio	Zone 2 and Zone 3 audio output capability
Audyssey MultEQ	Auto room acoustic calibration
Bluetooth	Wireless audio streaming capability
USB Input	For connecting USB storage devices
Phono Input	For turntable connection
Remote Control	Learning remote with backlit buttons

Installation

Unpack and inspect contents. Place in well-ventilated area.

Connect speakers: Use appropriate gauge speaker wire for each channel.
Connect HDMI devices: Use HDMI cables for video sources like Blu-ray players, game consoles.
Connect network: Use Ethernet cable or setup Wi-Fi connection.
Connect subwoofer: Use RCA cable for LFE output.
Plug into AC power.

WARNING! Ensure adequate ventilation space around receiver. Do not block ventilation holes.

First-Time Setup

Power on receiver; follow on-screen setup wizard.

Run Audyssey calibration: Connect microphone, follow on-screen instructions for speaker setup.
Configure inputs: Assign HDMI inputs to specific sources (BD, DVD, SAT/CBL, etc.).
Set network connection: Configure Ethernet or Wi-Fi settings.
Configure audio settings: Set speaker sizes, crossovers, and distances.
Update firmware: Check for latest firmware updates via network.

CAUTION! Use proper speaker impedance matching. Do not short circuit speaker terminals.

Specifications

Power Output: 125W per channel (8 ohms, 20Hz-20kHz, 0.08% THD)
Surround Format: Dolby TrueHD, DTS-HD Master Audio, Dolby Atmos
HDMI: 6 inputs, 2 outputs (Main and Zone 2)
Network: Ethernet, Wi-Fi, Bluetooth
Audio Inputs: 8 analog, 2 coaxial, 2 optical, phono
Video Inputs: Component video (2), composite video (4)
Multi-zone: Zone 2 and Zone 3 capable
Dimensions: 17.3" W x 6.4" H x 15.7" D
Weight: 26.5 lbs
Power Consumption: 650W maximum

Controls and Settings

Access menu system via front panel or remote control. Front Panel: POWER, INPUT SELECT, VOLUME, SETUP, TONE CONTROL.

Remote: POWER, INPUT SELECT, VOLUME, MUTE, SETUP, AUDIO, STATUS, ZONE 2/ZONE 3 controls.

Audio Settings: Speaker configuration, crossover frequencies, distance settings, tone controls. Video Settings: HDMI control, resolution output, video conversion. Network Settings: IP configuration, streaming services setup. System Settings: Firmware update, factory reset, OSD language.

Connecting Devices

HDMI: Connect video sources to HDMI inputs. Analog: Use RCA cables for audio sources. Network: Ethernet or Wi-Fi for streaming.

Turn off receiver and devices before connecting.
Use high-quality HDMI cables for best video performance.
Assign inputs appropriately in setup menu.
Connect network cable for firmware updates and streaming.

Tip: Use HDMI Control (CEC) for single remote operation of connected devices.

Network Setup

Supports streaming services and network audio playback.

Wired connection: Connect Ethernet cable to router.
Wireless connection: Configure Wi-Fi settings in network menu.
Streaming services: Access Spotify, Pandora, internet radio.
Network audio: Play music from NAS devices or computers.
Firmware updates: Check for updates via network connection.

WARNING! Ensure stable network connection for optimal streaming performance.

Audio Calibration

Audyssey MultEQ auto calibration system for optimal sound.

Connect calibration microphone to front panel.
Position microphone at primary listening position.
Follow on-screen instructions for multiple measurement positions.
System calculates speaker distances, levels, and EQ settings.
Save calibration results and make manual adjustments if needed.

CAUTION! Maintain quiet environment during calibration measurements.

Care & Maintenance

Unplug before cleaning. Use soft, dry cloth only; avoid liquids. Keep ventilation areas clear of dust.

CAUTION! Do not use chemical cleaners. Keep away from moisture and extreme temperatures.

Regulatory Information

FCC Part 15: Class B digital device compliant. CE marked for European market. Copyright © Marantz America, Inc. All rights reserved. For support, visit www.marantz.com or contact customer service at 1-800-370-3744.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No sound from speakers	Speaker connections/input selection	Check speaker wires; verify input source; check volume level.
No video output	HDMI connection/settings	Verify HDMI cable connection; check input assignment; try different HDMI port.
Network connection issues	Network settings/cables	Check Ethernet cable; verify Wi-Fi password; restart router.
Remote control not working	Batteries/obstructions	Replace batteries; ensure clear line of sight to receiver IR sensor.
Overheating	Ventilation blockage	Ensure adequate ventilation space; clean dust from vents.

Reset: Press POWER while holding STATUS and TONE to factory reset.

Service: 1-800-370-3744; www.marantz.com