marantz sr5005 manual pdf

The Marantz SR5005 is a high-performance AV receiver featuring 7.1 channel amplification, 1080p upscaling, HDMI connectivity with 3D support, Audyssey MultEQ room calibration, network audio streaming, and multi-zone capabilities. With 90 watts per channel, Dolby TrueHD and DTS-HD Master Audio decoding, and extensive connectivity options, this receiver delivers exceptional home theater performance. Below are key sections for setup, features, operation, and troubleshooting.

1. Features at a Glance 2. Installation and Setup 3. Speaker Configuration 4. Technical Specifications 5. Controls and Connections 6. Network and Streaming 7. Audio Settings 8. Video Processing 9. Multi-Zone Operation 10. Firmware Updates 11. Troubleshooting

Features at a Glance

Key components: 7.1 channel amplifier, HDMI switching, network connectivity, Audyssey room correction, multi-zone capability.

FeatureDescription
Power Output90 watts per channel (8 ohms, 20Hz-20kHz)
HDMI Ports6 inputs, 1 output with 3D and ARC support
Audio DecodingDolby TrueHD, DTS-HD Master Audio
Video Upscaling1080p upscaling from analog sources
Network AudioEthernet and Wi-Fi streaming
Room CorrectionAudyssey MultEQ auto setup
Multi-zoneZone 2 audio output capability
InputsComponent, composite, digital coaxial/optical
RadioAM/FM tuner with presets
Remote ControlLearning remote with backlight

Installation and Setup

Unpack and inspect all components. Place receiver in well-ventilated area.

  1. Connect speakers: Use appropriate gauge speaker wire for all channels.
  2. Connect source devices: Use HDMI for best quality, component/composite for legacy devices.
  3. Connect display: Use HDMI output to TV or projector.
  4. Connect antenna: Attach AM loop and FM wire antennas.
  5. Plug into AC power and turn on.

WARNING! Ensure adequate ventilation around receiver to prevent overheating. Leave at least 4 inches of clearance on all sides.

Speaker Configuration

Run Audyssey MultEQ auto setup for optimal speaker calibration.

  1. Connect setup microphone to front panel.
  2. Position microphone at primary listening position.
  3. Follow on-screen prompts for multiple measurement positions.
  4. Verify speaker settings: size, distance, level, and crossover.
  5. Manual adjustments: Access speaker setup menu for custom configurations.

CAUTION! Ensure all speaker connections are secure and polarity is correct to prevent damage.

Technical Specifications

Controls and Connections

Front Panel: Power, input selector, volume knob, headphone jack, setup mic, USB port.

Remote: Power, input selection, volume, mute, menu navigation, transport controls, quick select buttons.

Input Setup: Assign inputs to sources, rename inputs for clarity. Audio Processing: Select surround modes (Dolby, DTS, stereo), apply Audyssey Dynamic EQ and Volume. Video Settings: Resolution output, HDMI control, video conversion options. Network Setup: Configure Ethernet or Wi-Fi connection, set up streaming services.

Network and Streaming

Connect to home network for audio streaming and internet radio.

  1. Wired connection: Connect Ethernet cable to router.
  2. Wireless connection: Install optional Wi-Fi adapter (sold separately).
  3. Network setup: Configure IP settings (DHCP recommended).
  4. Streaming services: Access Pandora, SiriusXM, internet radio.
  5. Media server: Connect to DLNA-compatible servers on network.

Tip: For best streaming performance, use wired Ethernet connection when possible.

Audio Settings

Customize audio performance to match room and preferences.

  1. Audyssey Settings: MultEQ, Dynamic EQ, Dynamic Volume
  2. Manual EQ: 7-band parametric equalizer
  3. Speaker Levels: Individual channel trim adjustments
  4. Delay Settings: Speaker distance calibration
  5. Crossover: Set appropriate frequencies for speakers
  6. Surround Modes: Dolby Pro Logic IIx, DTS Neo:6, stereo modes

WARNING! Avoid extreme volume levels that could damage speakers or hearing.

Video Processing

Advanced video processing for optimal picture quality.

HDMI Settings: Resolution output, deep color, HDMI control. Video Conversion: Analog to digital conversion with scaling. Picture Adjustments: Brightness, contrast, hue, saturation for analog inputs. OSD Setup: On-screen display position and timeout settings.

Multi-Zone Operation

Second zone audio for whole-home entertainment.

Zone 2 Setup: Assign source, set volume limits. Control Options: Remote control operation for second zone. Source Selection: Different sources in main zone and zone 2. Power Management: Independent power control for each zone.

Firmware Updates

Keep receiver updated with latest features and compatibility.

  1. Network Update: Automatic updates when connected to internet
  2. Manual Update: Download firmware to USB drive
  3. Update Process: Follow on-screen instructions carefully
  4. Verification: Confirm successful update completion

CAUTION! Do not interrupt power during firmware update process.

Troubleshooting

SymptomPossible CauseCorrective Action
No sound from speakersInput selection/speaker setupCheck input source, verify speaker connections, run Audyssey setup.
No video outputHDMI connection/settingsVerify HDMI cables, check input resolution settings, try different input.
Network connection failedNetwork settings/cablesCheck Ethernet cable, verify network settings, restart router.
Remote not workingBatteries/obstructionsReplace batteries, ensure clear line of sight to receiver.
OverheatingInsufficient ventilationEnsure adequate clearance, clean ventilation openings.

Reset: Press and hold TUNER PRESET CH + and TUNER PRESET CH - while powering on for factory reset.

Support: Contact Marantz customer service at 1-800-843-2521 or visit www.marantz.com

Marantz SR5005 User Manual © - All Rights Reserved 2025