Marantz SR5004 Manual PDF

The Marantz SR5004 is a high-performance AV receiver featuring 7.1 channel surround sound, 1080p HDMI switching, Audyssey MultEQ auto calibration, network audio streaming, multi-room capability, and 90 watts per channel. This comprehensive manual covers setup, operation, connectivity, and troubleshooting for optimal home theater performance.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Network and Streaming 8. Audio Calibration 9. Care & Maintenance 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: 7.1 channel amplifier, HDMI 1.3a inputs, Ethernet port, Audyssey MultEQ, multi-room audio, and advanced audio processing.

Feature	Description
HDMI Inputs	6 HDMI 1.3a inputs with 1080p upscaling
Audio Power	90 watts per channel (8 ohms, 20Hz-20kHz)
Network Audio	Ethernet and USB for streaming audio
Audyssey MultEQ	Auto room acoustic calibration
Multi-room	Zone 2 audio output capability
Audio Formats	Dolby TrueHD, DTS-HD Master Audio
Video Processing	Faroudja DCDi Cinema
Inputs	Component video, composite, digital audio
Outputs	7.1 pre-outs, subwoofer, zone 2
Remote Control	RC0051SR learning remote

Installation

Unpack and inspect contents. Place in well-ventilated area with adequate clearance.

Connect speakers: Use appropriate gauge speaker wire for each channel (Front L/R, Center, Surround L/R, Surround Back L/R).
Connect subwoofer: Use RCA cable to subwoofer pre-out.
Connect video sources: HDMI for HD sources, component/composite for legacy devices.
Connect antenna: FM/AM antennas for radio reception.
Plug into AC power.

WARNING! Ensure proper ventilation to prevent overheating. Do not block ventilation slots.

First-Time Setup

Power on receiver; follow on-screen setup wizard.

Run Audyssey calibration: Connect included microphone and follow auto setup prompts.
Configure inputs: Assign names and settings to each input source.
Set speaker configuration: Specify speaker sizes and distances.
Configure network: Connect Ethernet cable for network features.
Set audio preferences: Choose surround modes and audio enhancements.

CAUTION! During calibration, ensure quiet environment for accurate measurements.

Specifications

Power Output: 90W x 7 (8 ohms, 20Hz-20kHz, 0.08% THD)
Frequency Response: 10Hz-100kHz (+1/-3 dB)
HDMI: 6 inputs, 1 output (v1.3a, 1080p, Deep Color, x.v.Color)
Video Conversion: Composite/Component to HDMI upscaling
Audio Decoding: Dolby TrueHD, DTS-HD Master Audio, Dolby Digital Plus
Network: Ethernet, USB, internet radio, streaming audio
Multi-room: Zone 2 audio with independent source selection
Power Consumption: 600W maximum, 65W standby
Dimensions: 440 x 427 x 161 mm (W x D x H)
Weight: 12.5 kg

Controls and Settings

Access setup menu via front panel or remote control. Front Panel: POWER, INPUT SELECT, VOLUME, SETUP, TONE.

Remote: POWER, INPUT SELECT, VOLUME, MUTE, SETUP, AUDIO, TONE, ZONE 2, SLEEP.

Setup Menu: Speaker configuration, input assign, audio adjustment, video settings, network setup, system options. Audio: Surround mode (Auto, Dolby, DTS, Stereo), tone control, Audyssey settings. Video: Resolution, HDMI settings, video mode. Network: IP configuration, streaming services, firmware update.

Connecting Devices

HDMI: Primary connection for HD sources. Analog: Component, composite, stereo audio. Digital: Optical/coaxial audio.

Turn off receiver and devices before connecting.
Use HDMI cables for video/audio sources when possible.
Assign inputs in setup menu for proper source identification.
Connect network via Ethernet for streaming features.

Tip: Use high-quality HDMI cables for best video/audio performance.

Network and Streaming

Supports internet radio, music streaming, and firmware updates.

Network connection: Connect Ethernet cable or configure wireless adapter.
Internet radio: Access thousands of stations via vTuner.
Music streaming: Play audio from network shares and streaming services.
Firmware updates: Check for and install latest firmware via network.
Control: Use web interface or mobile app for remote control.

WARNING! Ensure stable network connection for streaming reliability.

Audio Calibration

Audyssey MultEQ auto calibration optimizes sound for your room.

Connect calibration microphone to front panel MIC jack.
Position microphone at primary listening position.
Run auto setup from main menu.
Take measurements at multiple positions (recommended 6-8 positions).
Review and save calibration results.

CAUTION! Maintain silence during calibration measurements.

Care & Maintenance

Unplug before cleaning. Use soft, dry cloth for exterior. Keep away from moisture and extreme temperatures.

CAUTION! Do not use liquid cleaners. Ensure proper ventilation during operation.

Regulatory Information

FCC Part 15: Class B digital device compliant. CE marked for European market. RoHS compliant. Copyright © 2009 Marantz. For support, visit www.marantz.com or contact authorized service centers. Manufactured under license from Dolby Laboratories and DTS.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No sound	Input selection/speaker wires	Check input source; verify speaker connections; ensure volume not muted.
No video	HDMI connection/settings	Verify HDMI cables; check input assignment; try different HDMI input.
Network not working	Connection/configuration	Check Ethernet cable; verify network settings; restart router.
Remote not responding	Batteries/obstructions	Replace batteries; ensure line of sight to IR sensor; check mode selection.
Overheating	Ventilation/placement	Ensure adequate ventilation; check for blocked vents; reduce volume if necessary.

Reset: Press and hold TONE and STATUS while powering on for factory reset.

Service: Contact authorized Marantz service center; www.marantz.com