marantz sr5003 manual download

The Marantz SR5003 is a high-performance AV receiver featuring 7.1 channel surround sound, HDMI connectivity, Dolby TrueHD and DTS-HD Master Audio decoding, Audyssey MultEQ auto calibration, 1080p upscaling, multi-zone capability, and 90 watts per channel. Below are key sections for features, installation, setup, operation, specifications, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Audio/Video Setup 8. Multi-Zone Operation 9. Care & Maintenance 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: 7.1 channel amplifier, HDMI inputs/outputs, Audyssey room calibration, multi-zone capability, remote control, and comprehensive connectivity options.

Feature	Description
HDMI Inputs	4 HDMI inputs with 1080p upscaling
Audio Decoding	Dolby TrueHD, DTS-HD Master Audio
Power Output	90 watts per channel (8 ohms, 20Hz-20kHz)
Audyssey MultEQ	Auto room calibration and speaker setup
Multi-Zone	Zone 2 audio output capability
Network Ready	Ethernet port for firmware updates
Component Video	2 component video inputs
Digital Audio	Optical and coaxial digital inputs
Analog Audio	Multiple analog audio inputs
Phono Input	Dedicated phono input for turntables

Installation

Unpack and inspect contents. Place receiver in well-ventilated area.

Connect speakers: Match polarity (+/-) and impedance (6-16 ohms).
Connect HDMI devices: Use HDMI inputs for Blu-ray players, game consoles.
Connect audio sources: Use digital/analog inputs for CD players, turntables.
Connect video display: Use HDMI output to TV or projector.
Plug into AC power.

WARNING! Ensure proper ventilation; do not block ventilation slots. Use correct speaker impedance.

First-Time Setup

Power on receiver; follow on-screen setup wizard.

Run Audyssey calibration: Connect included microphone and follow prompts.
Set speaker configuration: Small/Large, crossover frequencies, distances.
Configure inputs: Assign sources to input buttons.
Set video options: Resolution, HDMI control, upscaling settings.
Configure audio settings: Surround modes, tone controls.

CAUTION! Ensure all connections are secure before powering on.

Specifications

Power Output: 90W x 7 (8 ohms, 20Hz-20kHz, 0.08% THD)
Surround Formats: Dolby TrueHD, DTS-HD Master Audio, Dolby Digital Plus
HDMI: 4 inputs, 1 output (v1.3a with Deep Color)
Video Conversion: Composite/Component to HDMI upscaling
Frequency Response: 10Hz-100kHz (+1/-3dB)
Signal-to-Noise: 100dB (line level)
Dimensions: 440 x 395 x 161 mm (W x D x H)
Weight: 11.5 kg
Power Consumption: 550W maximum

Controls and Settings

Front Panel: POWER, INPUT SELECT, VOLUME, SETUP, TONE, MUTE. Display: Source, format, volume level indicators.

Remote: POWER, INPUT SELECT, VOLUME, MUTE, SURROUND MODE, SETUP, ZONE 2, numeric buttons.

Setup Menu: Speaker Configuration, Input Assign, Video Settings, Audio Adjustments, System Setup. Audio: Surround modes (Auto, Direct, Pure Direct), tone controls, Audyssey settings. Video: Resolution, HDMI settings, upscaling options.

Connecting Devices

HDMI: Primary connection for modern devices. Component: For legacy video sources. Analog: For CD players, turntables.

Turn off receiver and devices before connecting.
Use high-quality HDMI cables for best performance.
Assign inputs in setup menu for easy source selection.
Connect Zone 2 speakers for multi-room audio.

Tip: Label cables for easy identification during setup.

Audio/Video Setup

Optimize settings for your room and equipment.

Run Audyssey MultEQ: Place microphone at listening position.
Adjust speaker levels: Manual trim adjustments if needed.
Set crossover: 80Hz recommended for small speakers.
Configure video: Set output resolution matching your display.
Enable HDMI Control: For system integration with compatible devices.

WARNING! Ensure microphone is connected during Audyssey setup.

Multi-Zone Operation

Zone 2 allows independent audio playback in second room.

Connect Zone 2 speakers to dedicated terminals.
Select Zone 2 source using remote or front panel.
Adjust Zone 2 volume independently.
Zone 2 operates with analog sources only.

Care & Maintenance

Unplug before cleaning. Use soft, dry cloth only; avoid liquids. Ensure proper ventilation.

CAUTION! Do not block ventilation slots; maintain adequate air circulation.

Regulatory Information

FCC compliant; CE marked. Manufactured under license from Dolby Laboratories. DTS and DTS-HD are trademarks of DTS, Inc. Audyssey is a trademark of Audyssey Laboratories. For support, visit www.marantz.com or contact authorized service centers.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No sound	Input selection/speaker wires	Check input selection; verify speaker connections; ensure volume not muted.
No video	HDMI connection/settings	Check HDMI cables; verify input assignment; check display settings.
Remote not working	Batteries/obstructions	Replace batteries; ensure line of sight to IR sensor.
Overheating	Ventilation blocked	Ensure adequate ventilation; clear obstructions around receiver.
No HDMI audio	Audio settings	Check HDMI audio output settings; verify source device settings.

Reset: Press and hold TONE and SURROUND MODE while powering on for factory reset.

Service: Contact authorized Marantz service center; www.marantz.com