Marantz SR5000 User Manual

The Marantz SR5000 is a high-performance AV receiver featuring Dolby Digital and DTS decoding, 5.1 channel surround sound, multiple audio/video inputs, AM/FM tuner, remote control, and advanced audio processing. With 100 watts per channel, this receiver delivers exceptional sound quality for home theater systems. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Audio Setup 8. Remote Control Functions 9. Care & Maintenance 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: 5.1 channel amplifier, Dolby Digital/DTS decoder, multiple audio/video inputs, AM/FM tuner, remote control, front panel controls.

Feature	Description
Power Output	100 watts per channel (8 ohms, 20Hz-20kHz)
Audio Decoding	Dolby Digital, DTS, Pro Logic
Inputs	4 composite video, 3 digital audio (2 optical, 1 coaxial)
Outputs	5.1 channel pre-outs, subwoofer output
Tuner	AM/FM with 30 station presets
Remote Control	Learning remote with macro functions
Power	Turns receiver on/off
Volume Control	Master volume adjustment
Input Selector	Switches between audio/video sources
Surround Mode	Selects decoding and DSP modes

Installation

Unpack and inspect contents. Place in well-ventilated area.

Connect speakers: Match polarity (+/-) for all channels (Front L/R, Center, Surround L/R, Subwoofer).
Connect audio sources: Use appropriate inputs for CD, DVD, TV, etc.
Connect video sources: Composite video inputs for VCR, DVD player.
Connect antenna: AM loop and FM wire antennas included.
Plug into AC power.

WARNING! Ensure proper ventilation; do not block cooling vents. Use correct speaker impedance.

First-Time Setup

Power on receiver; follow on-screen display or front panel indicators.

Set speaker configuration: Small/Large, distance, level calibration.
Program tuner: Auto-scan for AM/FM stations and store presets.
Configure inputs: Assign digital inputs to specific sources.
Set surround modes: Choose default decoding for various sources.
Test speakers: Use test tone for level adjustment.

CAUTION! Disconnect power before making connections. Ensure proper speaker wiring.

Specifications

Power Output: 100W x 5 (8 ohms, 20Hz-20kHz, 0.08% THD)
Frequency Response: 10Hz-100kHz (+1/-3dB)
Signal-to-Noise Ratio: 100dB (line inputs)
Total Harmonic Distortion: 0.08% (rated power)
Input Sensitivity: 200mV (line), 2.5mV (MM phono)
Digital Inputs: 2 optical, 1 coaxial
Video Inputs: 4 composite video
Tuner Section: AM/FM with 30 presets
Power Consumption: 450W maximum
Dimensions: 440mm x 151mm x 378mm (WxHxD)

Controls and Settings

Front Panel: POWER, VOLUME, INPUT SELECTOR, SURROUND MODE, TUNER PRESETS.

Remote: POWER, Numeric buttons, INPUT SELECT, VOLUME, MUTE, SURROUND MODE, TUNER, SETUP.

Audio Settings: Speaker size, distance, level, crossover frequency. Video Settings: Input assignment. Tuner: Auto/manual tuning, preset memory. System: Display dimmer, sleep timer. Surround Modes: Dolby Digital, DTS, Pro Logic, Stereo, Direct.

Connecting Devices

Audio: CD player, turntable, tape deck. Video: DVD player, VCR, TV. Digital: CD/DVD players with optical/coaxial outputs.

Turn off receiver and devices before connecting.
Use high-quality cables for best performance.
Match input types to source devices.
Assign digital inputs in setup menu.
Connect subwoofer using mono RCA cable.

Tip: Use digital connections for best audio quality from DVD/CD sources.

Audio Setup

Optimize sound for your room and speaker configuration.

Speaker Configuration: Set size (Small/Large) for each channel.
Distance Setting: Input distance from listening position to each speaker.
Level Calibration: Use test tone and SPL meter for precise level matching.
Crossover: Set subwoofer crossover frequency (80Hz recommended).
Surround Mode: Select appropriate decoding for each source.
Bass Management: Configure LFE and main channel bass routing.

WARNING! Avoid extreme volume levels that could damage speakers or hearing.

Remote Control Functions

Learning remote with macro capability for system control.

Button	Function
POWER	Turns receiver on/off
INPUT SELECT	Cycles through source inputs
VOLUME +/-	Adjusts master volume
MUTE	Temporary audio mute
SURROUND MODE	Selects decoding/DSP modes
TUNER	Accesses tuner functions
SETUP	Enters configuration menu
NUMERIC	Direct input selection, tuner presets
MACRO	Programs multiple commands

Care & Maintenance

Unplug before cleaning. Use soft, dry cloth for exterior. Keep away from moisture and extreme temperatures.

CAUTION! Do not use liquid cleaners or aerosols. Ensure proper ventilation at all times.

Regulatory Information

FCC Part 15: Class B digital device compliant. CE marked for European market. Copyright © Marantz. For support, visit www.marantz.com or contact authorized service centers. Disposal: Follow local regulations for electronic waste.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No sound	Input selection, volume, mute	Check input selection, volume level, mute status
No video	Input assignment, cables	Verify video input assignment, check cable connections
Remote not working	Batteries, obstacles	Replace batteries, ensure line of sight to receiver
No surround sound	Source material, mode selection	Check source format, select appropriate surround mode
Tuner no reception	Antenna connection	Verify antenna connections, reposition antennas
Overheating	Ventilation blocked	Ensure adequate ventilation around receiver

Reset: While powered on, press TUNER PRESET + SURROUND MODE simultaneously for 5 seconds.

Service: Contact authorized Marantz service center. Do not attempt internal repairs.