Marantz SR4002 User Manual

The Marantz SR4002 is a high-performance AV receiver featuring 7.1 channel surround sound, 90 watts per channel, HDMI connectivity, Dolby Digital and DTS decoding, Audyssey room correction, multi-zone audio capability, AM/FM tuner, and extensive connectivity options. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Audio Setup and Calibration 8. Multi-Zone Operation 9. Care & Maintenance 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: 7.1 channel amplifier, HDMI switching, Audyssey room correction, multi-zone audio, remote control, extensive input/output connections.

Feature	Description
Power Output	90 watts per channel (8 ohms, 20Hz-20kHz)
HDMI Inputs	3 HDMI inputs, 1 HDMI output
Audio Decoding	Dolby Digital, DTS, Dolby Pro Logic II
Audyssey Room Correction	Automatic speaker calibration
Multi-Zone Audio	Second zone audio capability
AM/FM Tuner	40 station presets
Component Video	2 component video inputs
Digital Audio Inputs	Optical and coaxial inputs
Speaker Terminals	7-channel binding posts
Remote Control	Learning remote with backlight

Installation

Unpack and inspect contents. Place in well-ventilated area.

Connect speakers: Use appropriate gauge speaker wire for all 7 channels.
Connect video sources: Use HDMI, component, or composite inputs.
Connect audio sources: Use digital optical, coaxial, or analog inputs.
Connect subwoofer: Use LFE or line-level subwoofer output.
Plug into AC power.

WARNING! Ensure adequate ventilation; do not block cooling vents. Use proper speaker impedance.

First-Time Setup

Power on receiver; follow on-screen setup wizard.

Run Audyssey calibration: Connect included microphone and follow prompts.
Set speaker configuration: Specify speaker sizes and distances.
Configure inputs: Assign sources to appropriate inputs.
Set volume limits: Establish maximum volume for safety.
Tune radio: Auto-scan and save AM/FM stations.

CAUTION! Ensure all connections are secure before powering on.

Specifications

Power Output: 90W x 7 channels (8 ohms, 20Hz-20kHz)
Total Harmonic Distortion: 0.08%
Frequency Response: 10Hz-100kHz
Signal-to-Noise Ratio: 100dB
HDMI: 3 inputs, 1 output (version 1.2a)
Component Video: 2 inputs, 1 output
Digital Audio: 2 optical, 2 coaxial inputs
Analog Audio: 6 stereo inputs
Power Consumption: 550W maximum
Dimensions: 17.3" W x 6.4" H x 15.7" D
Weight: 24.7 lbs

Controls and Settings

Front Panel: POWER, INPUT SELECT, VOLUME, TONE, MUTE, HEADPHONE, SETUP.

Remote: POWER, INPUT SELECT, VOLUME, MUTE, SURROUND MODE, TONE, SETUP, numeric buttons.

Audio Settings: Bass, Treble, Balance, Loudness, Night Mode. Video Settings: HDMI control, resolution output. Speaker Settings: Size, Distance, Level, Crossover. Tuner Settings: Preset memory, auto scan. System Settings: OSD language, firmware update.

Connecting Devices

HDMI: For HD video and audio. Component: For progressive scan video. Digital Audio: For surround sound. Analog Audio: For stereo sources.

Turn off receiver and devices before connecting.
Use high-quality HDMI cables for best performance.
Assign inputs in setup menu for easy selection.
Connect speakers observing proper polarity.

Tip: Use banana plugs for secure speaker connections.

Audio Setup and Calibration

Audyssey automatic room correction optimizes sound for your environment.

Place microphone at primary listening position.
Run auto calibration from setup menu.
Verify results and make manual adjustments if needed.
Set speaker distances and levels accurately.
Configure crossover frequencies (80Hz recommended).
Select appropriate surround mode for content.

WARNING! Ensure quiet environment during calibration for accurate results.

Multi-Zone Operation

Zone 2 capability allows audio in second room.

Connect Zone 2 speakers to dedicated terminals.
Select Zone 2 source from main remote or Zone 2 remote.
Adjust Zone 2 volume independently.
Different sources can play in main zone and Zone 2 simultaneously.

Care & Maintenance

Unplug before cleaning. Use soft, dry cloth only; no liquids or chemicals.

CAUTION! Keep away from moisture and heat sources. Ensure proper ventilation at all times.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © 2007 Marantz; trademarks of D&M Holdings. For support, visit www.marantz.com or contact authorized service centers.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No sound	Input selection/speaker wires	Check input selection; verify speaker connections; ensure not muted.
No video	HDMI connection/settings	Verify HDMI cables; check input assignment; try different resolution.
Overheating	Ventilation blockage	Ensure adequate ventilation; clear vents; check impedance load.
Remote not working	Batteries/obstructions	Replace batteries; ensure line of sight to IR sensor.
No surround sound	Source/decoding settings	Check source format; verify surround mode selection; check digital connections.

Reset: Press and hold TONE and SURROUND MODE while powering on for system reset.

Service: Contact authorized Marantz service center; www.marantz.com