marantz sr4002 manual download

The Marantz SR4002 is a high-performance AV receiver featuring 7.1 channel surround sound, HDMI connectivity, Dolby Digital and DTS decoding, multi-room audio capability, and advanced audio calibration. With 75 watts per channel, this receiver delivers exceptional sound quality for home theater systems. Below are key sections for features, installation, setup, operation, specifications, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Audio Configuration 8. Multi-Room Setup 9. Care & Maintenance 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: 7.1 channel amplifier, HDMI switching, remote control, multi-zone audio, Audyssey auto calibration, and extensive connectivity options.

Feature	Description
HDMI Inputs	3 HDMI inputs for high-definition video and audio
Audio Decoding	Dolby Digital, DTS, Dolby Pro Logic II
Power Output	75 watts per channel (8 ohms, 20Hz-20kHz)
Multi-room Audio	Zone 2 audio output for second room
Audyssey EQ	Automatic room acoustic correction
Inputs	Component video, composite, digital optical/coaxial
Speaker Terminals	7-channel binding posts
Remote Control	Learning remote with backlight
Setup Assistant	On-screen setup menu
Network Ready	Optional network interface module

Installation

Unpack and inspect contents. Ensure proper ventilation around receiver.

Connect speakers: Use appropriate gauge speaker wire for all 7 channels.
Connect video sources: Use HDMI for HD sources, component/composite for legacy devices.
Connect audio sources: Digital optical/coaxial for best audio quality.
Connect subwoofer: Use LFE output for powered subwoofer.
Plug into AC power and connect antenna for radio reception.

WARNING! Ensure adequate ventilation space around receiver to prevent overheating. Do not block ventilation slots.

First-Time Setup

Power on receiver; follow on-screen setup assistant.

Run Audyssey calibration: Connect included microphone and follow prompts.
Configure inputs: Assign sources to appropriate input buttons.
Set speaker configuration: Specify speaker sizes and distances.
Configure video: Set HDMI resolution and video processing options.
Set radio presets: Auto-scan and store favorite radio stations.

CAUTION! Use proper speaker impedance (6-16 ohms). Check all connections before powering on.

Specifications

Power Output: 75W x 7 channels (8 ohms, 20Hz-20kHz)
Total Harmonic Distortion: 0.08%
Frequency Response: 10Hz-100kHz (+1/-3dB)
Signal-to-Noise Ratio: 100dB
HDMI: 3 inputs, 1 output (version 1.2a)
Digital Audio: 2 optical, 2 coaxial inputs
Analog Audio: 6 stereo inputs
Video: 3 component, 4 composite inputs
Dimensions: 17.3" W x 6.4" H x 15.7" D
Weight: 24.7 lbs

Controls and Settings

Front panel: POWER, INPUT SELECT, VOLUME, TONE, SPEAKERS. Display: Source, format, volume level indicators.

Remote: POWER, INPUT SELECT, VOLUME, MUTE, SURROUND MODE, TONE, SETUP, numeric keys.

Setup Menu: Speaker configuration, input assign, video setup, audio adjustments, system settings. Surround Modes: Dolby Digital, DTS, Stereo, Direct, Pure Direct. Tone Controls: Bass, treble, balance adjustments.

Connecting Devices

HDMI: Primary connection for HD sources. Component: For progressive scan DVD players. Analog: For legacy audio components.

Turn off receiver and components before connecting.
Use HDMI for video sources when possible for best quality.
Assign digital inputs to appropriate sources in setup menu.
Connect speakers observing proper polarity (+/-).

Tip: Use high-quality HDMI cables for best video performance. Keep cable runs as short as possible.

Audio Configuration

Advanced audio settings for optimal sound quality.

Audyssey Setup: Run auto calibration with included microphone.
Manual EQ: Adjust 7-band equalizer for custom sound.
Speaker Levels: Set individual channel levels using test tone.
Distance Settings: Input speaker distances for proper timing.
Crossover: Set appropriate crossover frequencies for speakers.
Dynamic Range: Adjust for night listening or full dynamic range.

WARNING! During test tone, ensure volume is at comfortable level to prevent hearing damage.

Multi-Room Setup

Zone 2 functionality for whole-house audio.

Connect Zone 2 speakers to dedicated terminals.
Select Zone 2 source in setup menu.
Set Zone 2 volume independently from main zone.
Use remote to control Zone 2 power and source selection.

Note: Zone 2 operates in stereo only. Some audio formats may not be available in Zone 2.

Care & Maintenance

Unplug before cleaning. Use soft, dry cloth for exterior. Compressed air for ventilation slots.

CAUTION! Do not use liquid cleaners. Avoid moisture near ventilation openings. Ensure proper airflow around unit.

Regulatory Information

FCC Part 15 Class B compliant. CE marked. RoHS compliant. Manufactured under license from Dolby Laboratories. DTS and DTS-HD are registered trademarks. For technical support, visit www.marantz.com or contact authorized service centers.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No sound from speakers	Speaker wires/input selection	Check speaker connections; verify input source; check mute status
No video through HDMI	HDMI handshake/resolution	Power cycle devices; check HDMI cable; verify source resolution
Remote not working	Batteries/obstructions	Replace batteries; ensure line of sight to IR sensor
Overheating	Ventilation/speaker impedance	Ensure adequate ventilation; verify speaker impedance
No surround sound	Input format/settings	Check source audio format; verify surround mode selection

Reset: Press and hold TONE and SURROUND MODE while powering on for factory reset.

Service: Contact authorized Marantz service center. Do not attempt internal repairs.