Marantz SR19EX Manual

The Marantz SR19EX is a high-performance audio/video receiver featuring Dolby Digital and DTS decoding, multiple audio/video inputs, advanced surround sound processing, AM/FM tuner, remote control, and comprehensive connectivity options. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: Dolby Digital/DTS decoder, multiple audio/video inputs, AM/FM tuner, remote control, speaker terminals, digital inputs.

Feature	Description
Dolby Digital Decoder	5.1 channel surround sound processing
DTS Decoder	Digital Theater Systems decoding
Audio Inputs	Multiple analog and digital audio inputs
Video Inputs	Composite and S-Video inputs
AM/FM Tuner	Built-in radio with preset memory
Speaker Terminals	5-channel speaker outputs
Remote Control	Full-function remote with learning capability
Digital Inputs	Coaxial and optical digital audio inputs
Tone Controls	Bass and treble adjustment
Surround Modes	Multiple DSP surround modes

Installation

Unpack and inspect contents. Place on stable, well-ventilated surface.

1. Connect speakers: Use speaker wire to connect front, center, and surround speakers.
2. Connect audio sources: Use appropriate cables for CD player, tape deck, etc.
3. Connect video sources: Use composite or S-Video cables for VCR, DVD player.
4. Connect antenna: Attach AM loop and FM wire antennas.
5. Plug into AC power.

WARNING! Ensure proper ventilation; do not block vents. Use correct speaker impedance.

First-Time Setup

Power on receiver; follow initial setup procedure.

1. Speaker setup: Configure speaker size and distance in setup menu.
2. Input assignment: Assign sources to appropriate inputs.
3. Tuner setup: Auto-scan and store AM/FM stations.
4. Surround settings: Select preferred surround mode.
5. Test tones: Use built-in test tones for speaker level adjustment.

CAUTION! Ensure all connections are secure before powering on.

Specifications

• Power Output: 100W per channel (front), 30W (surround)
• Audio Decoders: Dolby Digital, DTS, Dolby Pro Logic
• Frequency Response: 20Hz - 20kHz
• Total Harmonic Distortion: 0.05%
• Inputs: 4 audio, 3 video, 2 digital
• Outputs: 5.1 channel pre-outs, tape monitor
• Tuner: AM/FM with 30 station presets
• Power Requirements: 120V AC, 60Hz
• Dimensions: 17.1" W × 6.4" H × 15.7" D
• Weight: 26.5 lbs

Controls and Settings

Front Panel: POWER, INPUT SELECTOR, VOLUME, TONE CONTROLS, HEADPHONE JACK.

Remote: POWER, INPUT SELECT, VOLUME, MUTE, SURROUND MODE, TUNER PRESETS, numeric buttons.

Audio Settings: Bass, treble, balance, loudness. Surround Settings: Dolby Digital, DTS, Pro Logic, Hall, Stadium. Tuner Settings: Auto-scan, manual tune, preset memory. System Settings: Speaker configuration, input assignment, factory reset.

Connecting Devices

Audio Sources: CD player, tape deck, turntable. Video Sources: VCR, DVD player. Speakers: Front L/R, center, surround L/R.

1. Turn off receiver before connecting devices.
2. Use appropriate cables for each source.
3. Connect speakers observing correct polarity.
4. Select input via INPUT SELECTOR.

Tip: Use high-quality cables for best audio performance.

Audio Setup

Optimize audio performance with proper setup.

1. Speaker levels: Adjust individual channel levels using test tones.
2. Speaker distance: Set delay times based on speaker placement.
3. Crossover: Configure crossover frequency for speakers.
4. Surround mode: Select appropriate mode for source material.
5. Tone controls: Adjust bass and treble to room acoustics.

WARNING! Do not exceed maximum power ratings for speakers.

Remote Control

Full-function remote with learning capability for controlling other devices.

Button	Function
POWER	Turns receiver on/off
INPUT SELECT	Cycles through input sources
VOLUME +/-	Adjusts master volume
MUTE	Temporary audio mute
SURROUND MODE	Selects surround processing
TUNER PRESETS	Accesses stored radio stations
NUMERIC	Direct input selection and tuning

Care & Maintenance

Unplug before cleaning. Use soft, dry cloth for exterior. Keep away from moisture and extreme temperatures.

CAUTION! Do not use liquid cleaners. Ensure proper ventilation during operation.

Regulatory Information

FCC Part 15: Class B digital device compliant. Manufactured under license from Dolby Laboratories. DTS and DTS Digital Surround are registered trademarks. For support, contact Marantz America at 1-800-270-2747 or visit www.marantz.com.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power	Power cord/outlet	Check power connection; try different outlet.
No sound	Speaker connections/mute	Check speaker wires; ensure not muted.
Poor FM reception	Antenna placement	Reposition FM antenna; ensure proper connection.
Remote not working	Batteries/obstructions	Replace batteries; ensure clear path to sensor.
Overheating	Ventilation blocked	Ensure adequate ventilation space around unit.

Reset: Disconnect power for 30 seconds then reconnect.

Service: 1-800-270-2747; www.marantz.com