Marantz SR1000 Manual

The Marantz SR1000 is a high-performance audio/video receiver featuring Dolby Digital and DTS decoding, multiple audio/video inputs, AM/FM tuner with 30 station presets, remote control, speaker setup calibration, multi-room audio capability, and advanced audio processing. Powered by 120V AC, 60Hz. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: Dolby Digital/DTS decoder, AM/FM tuner, multiple audio/video inputs, speaker terminals, remote control, multi-room capability.

Feature	Description
Audio Decoding	Dolby Digital, DTS, Pro Logic II
Power Output	100W per channel (8 ohms)
Audio Inputs	6 analog, 2 digital coaxial, 2 digital optical
Video Inputs	4 composite, 2 S-Video, 1 component
Tuner	AM/FM with 30 presets
Speaker Terminals	5.1 channel surround sound
Multi-room	Zone 2 audio output
Remote Control	Learning remote with macro functions
Setup	Auto speaker calibration
Display	Fluorescent display with dimmer

Installation

Unpack and inspect contents. Place in well-ventilated area.

1. Connect speakers: Match polarity (+/-) for all channels.
2. Connect audio sources: Use appropriate inputs for CD, DVD, etc.
3. Connect video sources: Component for HD, composite/S-video for standard.
4. Connect antenna: AM loop and FM wire antennas included.
5. Plug into AC power.

WARNING! Ensure proper ventilation; do not block vents. Use correct speaker impedance.

First-Time Setup

Power on receiver; follow on-screen display prompts.

1. Auto speaker setup: Use included microphone for room calibration.
2. Set speaker configuration: Large/small, distance, level.
3. Program tuner: Auto-scan for AM/FM stations.
4. Configure inputs: Assign sources to input buttons.
5. Set audio preferences: Surround mode, tone controls.

CAUTION! Ensure all connections secure before power on.

Specifications

• Power Output: 100W x 5 (8 ohms, 20Hz-20kHz)
• Frequency Response: 20Hz-20kHz (+0/-3dB)
• Signal-to-Noise: 100dB (line inputs)
• Total Harmonic Distortion: 0.05%
• Input Sensitivity: 200mV (line)
• Digital Inputs: 2 coaxial, 2 optical
• Video Bandwidth: 10MHz
• Power Consumption: 450W max
• Dimensions: 17-1/8" W x 6-3/4" H x 15-3/4" D
• Weight: 25.4 lbs

Controls and Settings

Front Panel: POWER, INPUT SELECT, VOLUME, TONE, MUTE, HEADPHONE.

Remote: POWER, INPUT SELECT, NUMERIC, VOLUME, MUTE, SURROUND MODE, TUNER PRESETS, SETUP.

Audio: Surround modes (Dolby Digital, DTS, Stereo), tone controls (bass/treble), loudness. Video: Input assignment, resolution settings. Tuner: Auto/manual tuning, preset memory. System: Speaker configuration, delay settings, test tones.

Connecting Devices

Audio: CD, DVD, Tape, etc. Video: DVD, VCR, Cable/Satellite. Speakers: Front, Center, Surround, Subwoofer.

1. Turn off all devices before connecting.
2. Use high-quality cables for best performance.
3. Match audio/video inputs to source devices.
4. Connect subwoofer via LFE or line output.
5. Select input via front panel or remote.

Tip: Use digital connections for best audio quality.

Audio Setup

Optimize sound for your room and speakers.

1. Speaker configuration: Set size (large/small) and crossover.
2. Distance settings: Measure speaker distances from listening position.
3. Level calibration: Use test tone to balance channel levels.
4. Surround modes: Select appropriate mode for source material.
5. Tone controls: Adjust bass/treble to preference.
6. Loudness: Engage for better low-volume listening.

WARNING! Avoid extreme volume levels to prevent speaker damage.

Multi-Room Operation

Zone 2 capability for second room audio.

1. Connect Zone 2 speakers to dedicated terminals.
2. Select Zone 2 source from main unit or remote.
3. Control Zone 2 volume independently.
4. Use remote extender for IR control in second room.

Note: Zone 2 operates in stereo mode only.

Care & Maintenance

Unplug before cleaning. Use soft, dry cloth only; no liquids or chemicals.

CAUTION! Keep away from moisture and heat sources. Ensure proper ventilation.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © 2006 Marantz; trademarks of Marantz America, Inc. For support, visit www.marantz.com or contact 1-800-270-2753.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power	Power cord/outlet	Check power connection; try different outlet.
No sound	Speaker connections/mute	Check speaker wires; ensure not muted; verify input selection.
Poor FM reception	Antenna placement	Reposition FM antenna; ensure proper connection.
Remote not working	Batteries/obstructions	Replace batteries; ensure clear path to sensor.
Overheating	Ventilation	Ensure adequate ventilation; clear vents of obstructions.
No video	Input selection/cables	Verify input selection; check video cable connections.

Reset: Press POWER while holding SURROUND and TONE buttons.

Service: 1-800-270-2753; www.marantz.com