marantz sr 8300 manual

The Marantz SR 8300 is a high-performance AV receiver featuring Dolby Digital and DTS decoding, 7.1 channel surround sound, 100 watts per channel, multiple audio/video inputs, digital optical/coaxial inputs, AM/FM tuner, remote control, and advanced audio processing. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Audio Setup and Calibration 8. Remote Control Operation 9. Care & Maintenance 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: 7.1 channel amplifier, Dolby Digital/DTS decoder, multiple audio/video inputs, digital inputs, AM/FM tuner, remote control.

Feature	Description
Power Output	100 watts per channel (8 ohms, 20Hz-20kHz)
Surround Formats	Dolby Digital, DTS, Dolby Pro Logic II
Audio Inputs	6 analog audio, 2 digital optical, 2 digital coaxial
Video Inputs	4 composite video, 2 S-Video, 2 component video
Tuner	AM/FM with 40 station presets
Speaker Terminals	7-channel binding posts
Remote Control	Learning remote with backlight
Audio Processing	24-bit/192kHz DACs, tone controls
Dimensions	17.1" W x 6.4" H x 16.1" D
Weight	28.7 lbs

Installation

Unpack and inspect contents. Place on stable, well-ventilated surface.

Connect speakers: Use speaker wire to connect front, center, surround, and subwoofer channels.
Connect audio sources: Use analog/digital inputs for CD player, DVD player, etc.
Connect video sources: Use composite, S-Video, or component inputs.
Connect antenna: Attach AM loop and FM wire antennas.
Plug into AC power outlet.

WARNING! Ensure proper ventilation; do not block vents. Use correct speaker impedance.

First-Time Setup

Power on receiver; follow on-screen display or front panel indicators.

Speaker configuration: Set speaker sizes (large/small) and distances.
Input assignment: Assign audio/video inputs to source components.
Tuner setup: Auto-scan and store AM/FM stations.
Audio calibration: Use test tones to balance speaker levels.
Surround mode: Select preferred decoding mode (Dolby Digital, DTS, etc.).

CAUTION! Turn off power before making connections. Ensure proper polarity when connecting speakers.

Specifications

Power Output: 100W x 7 (8 ohms, 20Hz-20kHz, 0.08% THD)
Frequency Response: 10Hz-100kHz (+1/-3dB)
Signal-to-Noise Ratio: 100dB (line level)
Total Harmonic Distortion: 0.08% (20Hz-20kHz)
Digital Inputs: 2 optical, 2 coaxial
Analog Inputs: 6 audio, 4 video composite, 2 S-Video
Component Video: 2 inputs, 1 output
Speaker Impedance: 6-16 ohms
Power Consumption: 650W maximum
Standby Power: 1W

Controls and Settings

Front Panel: POWER, INPUT SELECT, VOLUME, TONE, SURROUND MODE, TUNER PRESETS.

Remote Control: POWER, INPUT SELECT, VOLUME, MUTE, SURROUND MODE, TUNER, SETUP, numeric buttons.

Audio Settings: Bass, treble, balance, loudness, night mode. Video Settings: Component video resolution, video conversion. Tuner Settings: Auto/manual tuning, preset memory. System Settings: Speaker configuration, input rename, firmware update.

Connecting Devices

Audio Sources: CD player, turntable, tape deck. Video Sources: DVD player, cable box, gaming console.

Turn off receiver and components before connecting.
Match cable types to appropriate inputs (analog/digital).
Use high-quality cables for best performance.
Select input via INPUT SELECT button or remote.

Tip: Use digital connections for best audio quality from digital sources.

Audio Setup and Calibration

Optimize sound for your listening environment.

Speaker levels: Use built-in test tone to balance all channels.
Speaker distance: Set delay times for proper sound synchronization.
Crossover settings: Configure for speaker size and subwoofer integration.
Surround modes: Select appropriate decoding for source material.
EQ settings: Adjust tone controls to personal preference.

WARNING! Avoid extreme volume levels that could damage speakers or hearing.

Remote Control Operation

Learning remote controls multiple components.

Device selection: Press corresponding device button (TV, DVD, CD, etc.).
Volume control: Master volume affects all audio outputs.
Input selection: Switch between connected components.
Programming: Learn codes from original remotes for other devices.
Backlight: Press LIGHT button for illuminated keys in dark.

Care & Maintenance

Unplug before cleaning. Use soft, dry cloth only; avoid liquids.

Keep unit clean and dust-free. Ensure proper ventilation around unit.

CAUTION! Do not block ventilation openings. Avoid exposure to moisture and extreme temperatures.

Regulatory Information

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power	Power cord/outlet	Check power connection; ensure outlet is working.
No sound	Input selection/speakers	Verify input selection; check speaker connections; adjust volume.
Poor FM reception	Antenna placement	Reposition FM antenna; ensure proper connection.
Remote not working	Batteries/obstacles	Replace batteries; ensure clear path to IR sensor.
Overheating	Ventilation	Ensure adequate ventilation; clear vents of obstructions.
No video	Input/cables	Check video input selection; verify cable connections.

Reset: Press and hold TONE and SURROUND MODE while powering on for factory reset.

Service: Contact authorized Marantz service center; www.marantz.com