Marantz SR 7008 Manual

The Marantz SR 7008 is a high-performance 7.2 channel AV receiver featuring 125W per channel, 4K/60Hz video upscaling, built-in Wi-Fi and Bluetooth, AirPlay, Dolby TrueHD and DTS-HD Master Audio decoding, Audyssey MultEQ XT room calibration, multi-zone audio/video capabilities, and extensive connectivity options including 8 HDMI inputs. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: 7.2 channel amplifier, Network capabilities, HDMI switching, Zone 2 output, Audyssey room correction.

Feature	Description
HDMI Inputs	8 HDMI inputs with 4K/60Hz pass-through and upscaling
Network Connectivity	Built-in Wi-Fi and Ethernet for streaming services
Bluetooth	Wireless audio streaming from compatible devices
AirPlay	Apple AirPlay for iOS device streaming
Multi-zone	Zone 2 audio and video output capability
Audyssey MultEQ XT	Advanced room acoustic correction system
Power Output	125W per channel (8 ohms, 20Hz-20kHz)
Audio Formats	Dolby TrueHD, DTS-HD Master Audio, Dolby Atmos ready
Front Panel Inputs	USB, HDMI, analog audio inputs
Remote Control	Learning remote with backlit buttons

Installation

Unpack and inspect contents. Place in well-ventilated area.

1. Connect speakers: Use appropriate gauge speaker wire for each channel.
2. Connect video sources: Use HDMI inputs for best quality; assign inputs in setup.
3. Connect subwoofer: Use LFE output for powered subwoofers.
4. Network connection: Connect Ethernet cable or setup Wi-Fi.
5. Plug into AC power.

WARNING! Ensure adequate ventilation; do not block cooling vents. Use proper speaker impedance.

First-Time Setup

Power on receiver; follow on-screen setup assistant.

1. Run Audyssey calibration: Connect included microphone and follow prompts.
2. Input assignment: Assign HDMI inputs to specific sources (BD, SAT/CBL, etc.).
3. Network setup: Configure Wi-Fi or Ethernet connection.
4. Speaker configuration: Verify speaker sizes and distances after calibration.
5. Source setup: Configure audio and video settings for each input.

CAUTION! Ensure all connections are secure before powering on.

Specifications

• Power Output: 125W per channel (8 ohms, 20Hz-20kHz, 0.05% THD).
• Audio Decoding: Dolby TrueHD, DTS-HD Master Audio, Dolby Digital Plus.
• Video Processing: 4K/60Hz upscaling, 1080p to 4K conversion.
• Connectivity: 8 HDMI inputs, 2 HDMI outputs, 7.2 pre-outs.
• Network: Wi-Fi, Ethernet, Bluetooth, AirPlay.
• Room Correction: Audyssey MultEQ XT, Dynamic Volume, Dynamic EQ.
• Multi-zone: Zone 2 HDMI and analog audio output.
• Power Consumption: 680W maximum, 65W standby.
• Dimensions: 17.3" W x 6.4" H x 15.7" D.
• Weight: 26.5 lbs.

Controls and Settings

Access menu system via front panel or remote control. Front Panel: POWER, INPUT SELECT, VOLUME, SETUP, TONE.

Remote: POWER, Input selection, Volume, Mute, Menu navigation, Quick select buttons.

Audio Settings: Speaker configuration, crossover settings, tone controls, Audyssey settings. Video Settings: Resolution, HDMI settings, video mode. Network Settings: Wi-Fi setup, firmware updates, streaming services. System Settings: Input assignment, zone configuration, GUI settings.

Connecting Devices

HDMI: Primary connection for modern devices. Analog: For legacy components. Network: Ethernet or Wi-Fi.

1. Turn off receiver and devices before connecting.
2. Use high-speed HDMI cables for 4K content.
3. Assign inputs in setup menu for easy selection.
4. Connect network for streaming and updates.

Tip: Label cables for easy identification during setup.

Network Setup

Supports streaming services, firmware updates, and remote control via app.

1. Wired connection: Connect Ethernet cable to router.
2. Wireless setup: Access network settings in menu, select Wi-Fi network.
3. Streaming services: Access Spotify, Pandora, internet radio.
4. Firmware updates: Check for updates in network settings.
5. Marantz Remote App: Download app for iOS/Android control.

WARNING! Ensure stable network connection for best streaming performance.

Audio Calibration

Audyssey MultEQ XT room correction system for optimal sound.

1. Connect calibration microphone to front panel.
2. Position microphone at primary listening position.
3. Follow on-screen instructions for multiple measurement positions.
4. Review and save calibration results.
5. Adjust settings manually if desired.

CAUTION! Maintain silence during calibration measurements.

Care & Maintenance

Unplug before cleaning. Use soft, dry cloth only; avoid liquids.

Keep unit in well-ventilated area, away from heat sources and moisture.

CAUTION! Do not block ventilation openings; ensure proper airflow.

Regulatory Information

FCC Part 15: Class B digital device compliant. CE marked for European market. Copyright © Marantz. For support, visit www.marantz.com or contact authorized service centers. Manufactured under license from Dolby Laboratories.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No sound	Input selection/speaker wires	Check input selection; verify speaker connections; check volume.
No video	HDMI connection/settings	Verify HDMI cable; check input assignment; try different input.
Network not connecting	Wi-Fi signal/credentials	Check network settings; verify password; restart router.
Remote not working	Batteries/obstructions	Replace batteries; ensure line of sight to receiver.
Overheating	Ventilation blockage	Ensure adequate ventilation; clear vents; reduce volume.

Reset: Press and hold POWER and SURROUND MODE for 5 seconds.

Service: Contact authorized Marantz service center; www.marantz.com