Marantz SR-7000 Receiver Manual

The Marantz SR-7000 is a high-performance audio/video receiver featuring Dolby Digital and DTS decoding, 100 watts per channel, 6-channel amplification, multiple audio/video inputs, digital optical/coaxial inputs, AM/FM tuner, preamp outputs, speaker A/B switching, and advanced surround sound processing. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Audio Setup 8. Remote Control 9. Care & Maintenance 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Dolby Digital/DTS decoder, 6-channel amplifier, Remote Control, Multiple audio/video inputs, Digital inputs, Speaker terminals, Preamp outputs.

Feature	Description
Power Output	100 watts per channel (all channels driven)
Surround Formats	Dolby Digital, DTS, Dolby Pro Logic
Audio Inputs	6 analog audio inputs, 2 digital optical, 1 coaxial
Video Inputs	3 composite video, 2 S-Video
Speaker Outputs	Front L/R, Center, Surround L/R, Subwoofer
Tuner	AM/FM with 30 station presets
Preamp Outputs	Front, Center, Surround, Subwoofer
Headphone Jack	1/4" stereo headphone output
Speaker Selector	A/B speaker switching
Remote Control	Full-function learning remote

Installation

Unpack and inspect contents. Place on stable, well-ventilated surface.

Connect speakers: Use speaker wire to connect front, center, surround speakers and subwoofer.
Connect audio sources: Use audio cables for CD player, tape deck, etc.
Connect video sources: Use composite or S-Video cables for VCR, DVD player.
Connect digital sources: Use optical or coaxial cables for digital audio.
Connect antenna: Attach AM loop and FM wire antennas.
Plug into AC power.

WARNING! Ensure proper ventilation; do not block vents. Use correct speaker impedance.

First-Time Setup

Power on receiver; follow on-screen display or front panel indicators.

Set speaker configuration: Specify large/small speakers and subwoofer presence.
Set distance: Input speaker distances from listening position.
Set channel levels: Use test tone to balance all channels.
Program tuner: Auto-scan and store AM/FM stations.
Set input assignments: Assign digital inputs to specific sources.

CAUTION! Ensure all connections are secure before powering on.

Specifications

Power Output: 100W x 6 (8 ohms, 20Hz-20kHz)
Total Harmonic Distortion: 0.05%
Frequency Response: 20Hz-20kHz (+0/-3dB)
Signal-to-Noise Ratio: 100dB
Input Sensitivity: 200mV
Digital Inputs: 2 optical, 1 coaxial
Video Inputs: 3 composite, 2 S-Video
Audio Inputs: 6 analog stereo
Dimensions: 17-1/8" W x 6-3/4" H x 15-3/4" D
Weight: 26.5 lbs

Controls and Settings

Front Panel: POWER, VOLUME, INPUT SELECTOR, SURROUND MODE, TUNER PRESETS, HEADPHONE JACK.

Remote: POWER, INPUT SELECT, VOLUME, MUTE, SURROUND MODES, TUNER, TONE CONTROLS, NUMERIC KEYPAD.

Audio Settings: Bass, Treble, Balance, Loudness. Surround Modes: Dolby Digital, DTS, Dolby Pro Logic, Stereo. Speaker Settings: Size, Distance, Level. Tuner: Preset memory, Auto scan. Input Setup: Digital input assignment, input naming.

Connecting Devices

Audio: CD, Tape, Phono, Aux inputs. Video: DVD, VCR, TV. Digital: CD, DVD, SAT.

Turn off receiver and devices before connecting.
Match cable types to appropriate inputs.
Use digital connections for best audio quality.
Select input via front panel or remote control.

Tip: Use high-quality cables for best performance.

Audio Setup

Optimize sound for your room and speakers.

Speaker Configuration: Set front, center, surround speakers to large or small.
Distance Settings: Input distance from listening position to each speaker.
Channel Levels: Use test tone to set equal volume from all speakers.
Crossover: Set subwoofer crossover frequency (80Hz recommended).
Surround Modes: Select Dolby Digital for movies, DTS for music.
Tone Controls: Adjust bass and treble to preference.

WARNING! Do not exceed maximum input levels to prevent damage.

Remote Control

Full-function remote controls receiver and other components.

Features: Device selection (AMP, CD, TAPE, DVD, etc.), Volume control, Mute, Surround mode selection, Tuner control, Numeric keypad, Learning capability for other devices.

Programming: Follow instructions in manual to program remote for other components.

Care & Maintenance

Unplug before cleaning. Use soft, dry cloth only; no liquids or chemicals.

Ventilation: Ensure adequate air circulation around unit.

CAUTION! Do not block ventilation openings. Keep away from heat and moisture.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © Marantz America, Inc. Dolby and DTS are registered trademarks. For support, visit www.marantz.com or contact authorized service centers.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No sound	Speaker connections/mute	Check speaker wires; ensure mute is off; verify input selection.
No picture	Video connections	Check video cables; verify input source; ensure TV is on correct input.
Remote not working	Batteries/obstructions	Replace batteries; point remote at sensor; remove obstacles.
Overheating	Ventilation blocked	Ensure adequate ventilation; clear vents of dust.
No surround sound	Source/format selection	Select proper surround mode; ensure source has surround encoding.

Reset: Press and hold TUNER PRESET + STANDY for 5 seconds.

Service: Contact authorized Marantz service center; www.marantz.com