marantz sr 7000 owners manual

The Marantz SR 7000 is a high-performance AV receiver featuring Dolby Digital and DTS surround sound processing, 100 watts per channel (8 ohms, 20Hz-20kHz), 6-channel amplification, multiple audio/video inputs, digital optical/coaxial inputs, AM/FM tuner with 40 presets, learning remote control, speaker setup calibration, and advanced audio adjustments. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Audio Setup and Calibration 8. Remote Control Operation 9. Care & Maintenance 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Front panel controls, rear panel connections, remote control, speaker terminals, input/output jacks.

Feature	Description
Power Output	100W x 6 channels (8 ohms, 20Hz-20kHz)
Surround Formats	Dolby Digital, DTS, Dolby Pro Logic
Audio Inputs	6 analog audio inputs, 2 digital optical, 1 coaxial
Video Inputs	4 composite video, 2 S-Video
Tuner	AM/FM with 40 station presets
Speaker Terminals	6 channels with binding posts
Remote Control	Learning remote with macro functions
Setup Microphone	Auto speaker calibration input
Headphone Jack	Front panel 1/4" stereo jack
AC Power	120V AC, 60Hz operation

Installation

Unpack and inspect contents. Place in well-ventilated area.

Connect speakers: Use speaker wire to appropriate terminals (Front L/R, Center, Surround L/R).
Connect audio sources: CD player, tape deck, etc. to corresponding audio inputs.
Connect video sources: DVD player, VCR, etc. to video inputs.
Connect digital sources: Use optical/coaxial cables for digital audio.
Connect antenna: AM loop and FM wire antennas.
Plug into AC power.

WARNING! Ensure proper ventilation; do not block vents. Use correct speaker impedance.

First-Time Setup

Power on receiver; follow on-screen display or front panel indicators.

Speaker setup: Use auto calibration or manual speaker configuration.
Input assignment: Assign sources to appropriate inputs in setup menu.
Tuner setup: Auto-scan and store FM/AM stations.
Surround mode: Select default listening mode (Dolby Digital, DTS, etc.).
Volume calibration: Set reference levels for each channel.

CAUTION! Ensure all connections are secure before powering on.

Specifications

Power Output: 100W x 6 channels (8 ohms, 20Hz-20kHz, 0.08% THD)
Frequency Response: 10Hz-100kHz (+1/-3dB)
Signal-to-Noise Ratio: 100dB (line inputs)
Total Harmonic Distortion: 0.08% (rated power)
Input Sensitivity: 200mV (line), 2.5mV (MM phono)
Digital Inputs: 2 optical, 1 coaxial
Video Inputs: 4 composite, 2 S-Video
Speaker Impedance: 6-16 ohms
Power Consumption: 450W maximum
Dimensions: 17-1/8" W x 6-3/4" H x 15-3/4" D
Weight: 26.5 lbs

Controls and Settings

Front Panel: POWER, INPUT SELECT, VOLUME, TONE, SURROUND MODE, HEADPHONE, SETUP.

Remote: POWER, INPUT SELECT, VOLUME, MUTE, SURROUND MODE, NUMERIC, TONE, SETUP, MEMORY.

Audio: Bass, Treble, Balance, Loudness, Input Level. Video: Input assignment, video conversion. Speaker: Level, Distance, Crossover, Size. Tuner: Preset memory, Auto scan. System: OSD, Dimmer, Sleep timer.

Connecting Devices

Audio: CD, Tape, Phono, Aux inputs. Video: DVD, VCR, TV. Digital: Optical/coaxial for digital audio sources.

Turn off receiver and devices before connecting.
Match cable types to appropriate jacks.
Use high-quality cables for best performance.
Assign inputs in setup menu for easy selection.

Tip: Keep digital and analog cables separated to reduce interference.

Audio Setup and Calibration

Advanced audio configuration for optimal sound quality.

Speaker configuration: Set speaker size (Large/Small) and crossover frequency.
Distance settings: Input distance from listening position to each speaker.
Channel levels: Adjust individual channel volumes using test tone.
Surround modes: Select appropriate mode for source material.
Tone controls: Adjust bass and treble to preference.
Loudness: Enable for better low-volume listening.

WARNING! Use proper speaker impedance to avoid amplifier damage.

Remote Control Operation

Learning remote with macro programming capabilities.

Device selection: Choose controlled device (TV, VCR, CD, etc.).
Volume control: Master volume and individual input levels.
Input selection: Switch between audio/video sources.
Surround mode: Cycle through available surround formats.
Macro programming: Record sequences of commands for one-button operation.
Memory functions: Store and recall favorite settings.

Care & Maintenance

Unplug before cleaning. Use soft, dry cloth for exterior. Keep vents clear of dust.

CAUTION! Do not use liquid cleaners. Avoid moisture near electrical components.

Regulatory Information

FCC Part 15: Class B digital device compliant. UL listed for safety. Copyright © Marantz America, Inc. Dolby and DTS trademarks owned by respective companies. For support, contact Marantz customer service or authorized service centers.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power	Power cord, outlet	Check power connection; try different outlet; check fuse.
No sound	Input selection, mute	Verify input selection; check mute status; confirm speaker connections.
Distorted sound	Volume, connections	Reduce volume; check speaker wire connections; verify source quality.
No video	Input, cables	Confirm video input selection; check video cable connections.
Remote not working	Batteries, obstruction	Replace batteries; ensure clear path to IR sensor; check device selection.
Overheating	Ventilation, impedance	Ensure proper ventilation; verify speaker impedance compatibility.

Reset: System > Reset to factory defaults if available.

Service: Contact authorized Marantz service center for repairs.