marantz sr 6000 manual

The Marantz SR 6000 is a high-performance AV receiver featuring Dolby Digital and DTS decoding, 5.1 channel surround sound, 80 watts per channel, multiple audio/video inputs, digital optical/coaxial inputs, AM/FM tuner with 30 presets, learning remote control, speaker setup calibration, night mode, and various DSP sound modes. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: 5.1 channel amplifier, Dolby Digital/DTS decoder, AM/FM tuner, learning remote, multiple input/output terminals.

Feature	Description
Power Output	80 watts per channel (all channels driven)
Audio Decoding	Dolby Digital, DTS, Pro Logic
Inputs	6 audio/video inputs, 2 digital optical, 1 coaxial
Outputs	5.1 channel pre-outs, subwoofer output
Tuner	AM/FM with 30 station presets
Remote Control	Learning remote with macro functions
DSP Modes	Hall, Theater, Stadium, Mono Movie
Setup	Auto speaker calibration, test tone
Display	Fluorescent display with dimmer
Power	AC 120V, 60Hz

Installation

Unpack and inspect contents. Place in well-ventilated area.

1. Connect speakers: Match polarity (+/-) for all 5.1 channels.
2. Connect audio sources: Use appropriate input jacks for CD, DVD, etc.
3. Connect video sources: Component video, composite video inputs.
4. Connect subwoofer: Use dedicated subwoofer output.
5. Plug into AC power outlet.

WARNING! Ensure proper ventilation; do not block vents. Use correct speaker impedance.

First-Time Setup

Power on receiver; follow on-screen display or front panel indicators.

1. Speaker setup: Use auto calibration or manual speaker distance/level settings.
2. Input assignment: Assign digital inputs to specific sources.
3. Tuner setup: Auto-scan for AM/FM stations and store presets.
4. Sound mode selection: Choose preferred DSP mode for each source.
5. Remote programming: Set up learning functions for other devices.

CAUTION! Disconnect power before making any connections.

Specifications

• Power Output: 80W x 5 channels (8 ohms, 20Hz-20kHz)
• Total Harmonic Distortion: 0.08%
• Frequency Response: 20Hz-20kHz (+1/-3dB)
• Signal-to-Noise Ratio: 100dB
• Input Sensitivity: 200mV
• Digital Inputs: 2 optical, 1 coaxial
• Video Inputs: 3 composite, 2 S-video
• Speaker Impedance: 6-16 ohms
• Power Consumption: 280W
• Dimensions: 17-1/8" W x 6-1/4" H x 15-3/4" D

Controls and Settings

Front Panel: POWER, INPUT SELECTOR, VOLUME, TONE controls, HEADPHONE jack.

Remote: POWER, INPUT SELECT, VOLUME, MUTE, SURROUND MODE, TUNER PRESETS, SETUP MENU.

Audio Settings: Bass, Treble, Balance, Loudness, Night Mode. Video Settings: Input source assignment. Tuner Settings: Auto/manual tuning, preset memory. System Settings: Speaker configuration, distance, level calibration, input rename.

Connecting Devices

Audio Sources: CD player, turntable (with phono preamp), tape deck. Video Sources: DVD player, cable box, gaming console.

1. Turn off all components before connecting.
2. Use high-quality cables for best performance.
3. Connect digital sources to digital inputs for surround sound.
4. Assign inputs in setup menu for proper source selection.

Tip: Use component video for high-definition sources when available.

Audio Setup and Calibration

Auto calibration system with test tone.

1. Access setup menu: Press SETUP on remote.
2. Speaker configuration: Set size (large/small) for each channel.
3. Distance settings: Input distance from listening position to each speaker.
4. Level calibration: Adjust channel levels using test tone.
5. Crossover settings: Set subwoofer crossover frequency.
6. Save settings: Store configuration in memory.

WARNING! Use proper speaker wire gauge for your setup distance.

Remote Control Operation

Learning remote with macro programming capabilities.

1. Device selection: Press device button (TV, DVD, CBL, etc.)
2. Learning function: Hold SETUP + device button until LED blinks twice.
3. Macro programming: Record sequence of commands for one-button operation.
4. Input selection: Use INPUT SELECT to choose source.
5. Volume control: Master volume affects all sources.

Care & Maintenance

Unplug before cleaning. Use soft, dry cloth for exterior. Keep away from moisture and extreme temperatures.

CAUTION! Do not use liquid cleaners; avoid blocking ventilation openings.

Regulatory Information

FCC Part 15: Class B digital device compliant. CE marked for European safety standards. Manufactured under license from Dolby Laboratories. DTS and DTS Digital Surround are registered trademarks. For support, visit www.marantz.com or contact authorized service centers.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No sound	Input selection/speaker connections	Check input source; verify speaker wires; ensure not muted.
No surround sound	Source/DSP settings	Select proper surround mode; check digital input assignment.
Remote not working	Batteries/obstructions	Replace batteries; ensure clear path to IR sensor.
Overheating	Ventilation	Ensure adequate ventilation; check for blocked vents.
Tuner no reception	Antenna connection	Check antenna connection; perform auto tuning.

Reset: Disconnect power for 30 seconds, then reconnect.

Service: Contact authorized Marantz service center; www.marantz.com