Marantz SR-19 User Manual

The Marantz SR-19 is a high-performance AV receiver featuring Dolby Digital and DTS surround sound processing, multiple audio/video inputs, AM/FM tuner, remote control, on-screen display, bass management, speaker calibration, and advanced audio adjustments. Powered by 120V AC, 60Hz. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Audio Setup and Calibration 8. Remote Control Operation 9. Care & Maintenance 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Dolby Digital/DTS decoder, AM/FM tuner, multiple A/V inputs, speaker terminals, remote control, on-screen display.

Feature	Description
Dolby Digital Decoder	5.1 channel surround sound processing
DTS Decoder	Digital Theater System compatibility
AM/FM Tuner	40 station presets with auto-scan
Audio Inputs	6 analog audio inputs, 2 digital optical, 1 coaxial
Video Inputs	4 composite video, 2 S-Video
Speaker Terminals	5-channel speaker outputs plus subwoofer
Remote Control	Learning remote with macro functions
On-Screen Display	Menu-driven setup and configuration
Bass Management	Adjustable crossover frequencies
AC input connector	For power connection

Installation

Unpack and inspect contents. Place in well-ventilated area.

Connect speakers: Use speaker wire to connect front, center, surround speakers and subwoofer.
Connect audio sources: Use analog/digital inputs for CD player, tape deck, etc.
Connect video sources: Use composite or S-Video inputs for VCR, DVD player.
Connect antenna: Attach AM loop and FM wire antennas.
Plug into AC power.

WARNING! Ensure proper ventilation; leave at least 4 inches clearance on all sides.

First-Time Setup

Power on receiver; follow on-screen setup wizard.

Speaker configuration: Set speaker sizes (Large/Small) and distances.
Crossover settings: Configure bass management for optimal performance.
Input assignment: Assign sources to specific input buttons.
Tuner setup: Auto-scan and store AM/FM stations.
Test tones: Use internal test tones for level calibration.

CAUTION! Ensure all connections are secure before powering on.

Specifications

Power Output: 100 watts per channel (8 ohms, 20Hz-20kHz)
Surround Formats: Dolby Digital, DTS, Pro Logic
Frequency Response: 20Hz-20kHz (±0.5dB)
Signal-to-Noise: 100dB (line inputs)
Total Harmonic Distortion: 0.05%
Input Sensitivity: 200mV (line)
Tuner Section: AM/FM with 40 presets
Power Requirements: 120V AC, 60Hz, 450W
Dimensions: 17.1" W × 6.4" H × 15.7" D
Weight: 28.6 lbs

Controls and Settings

Access OSD via SETUP button. Front Panel: POWER, VOLUME, INPUT SELECT, TUNER PRESETS.

Remote: POWER, INPUT SELECT, VOLUME, MUTE, SURROUND MODE, SETUP, TUNER, TEST TONE.

Audio: Bass, Treble, Balance, Loudness, Surround Mode (Dolby Digital, DTS, Pro Logic). Video: Input selection, OSD position. Tuner: Preset memory, Auto-scan. System: Speaker configuration, Crossover settings, Input rename.

Connecting Devices

Audio: Analog/digital inputs. Video: Composite/S-Video. Speakers: 5.1 channel outputs.

Turn off receiver and devices before connecting.
Match cable types to appropriate inputs.
Use high-quality speaker wire for best performance.
Select input via INPUT SELECTOR (CD, TAPE, DVD, etc.).

Tip: Use digital connections for best audio quality from digital sources.

Audio Setup and Calibration

Advanced audio configuration for optimal performance.

Speaker levels: Use test tones and SPL meter for precise level matching.
Speaker distances: Set delay times for proper sound synchronization.
Crossover: Set appropriate frequencies based on speaker capabilities.
Surround modes: Select appropriate decoding for source material.
EQ settings: Adjust tone controls to room acoustics.

WARNING! Avoid extreme volume levels that could damage speakers or hearing.

Remote Control Operation

Learning remote with macro programming capabilities.

Device control: Program remote to control other components.
Macro functions: Create single-button operations for multiple commands.
Input selection: Switch between sources with dedicated buttons.
Volume control: Master volume with mute function.
Tuner operation: Station selection and preset memory.

Care & Maintenance

Unplug before cleaning. Use soft, dry cloth only; avoid liquids and aerosols.

Keep unit clean and dust-free. Ensure ventilation openings are unobstructed.

CAUTION! Do not block ventilation openings; maintain proper airflow.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © Marantz America, Inc. Dolby and DTS are registered trademarks. For support, visit www.marantz.com or contact 1-800-270-2744.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No sound	Speaker connections/input selection	Check speaker wires; verify input selection; ensure volume not muted.
No video	Input selection/cables	Verify input selection; check video cable connections.
Remote not working	Batteries/obstructions	Replace batteries; ensure clear path to IR sensor.
Overheating	Ventilation blocked	Ensure proper ventilation; reduce volume if necessary.
Tuner no reception	Antenna connections	Check antenna connections; reposition antennas for better reception.

Reset: Press POWER while holding TUNER PRESET 1 and 3 to factory reset.

Service: 1-800-270-2744; www.marantz.com