marantz rs 3559 manual

The Marantz RS 3559 is a high-performance audio/video receiver featuring Dolby Digital and DTS decoding, multi-room audio capability, 5.1 channel surround sound, AM/FM tuner with 40 station presets, multiple audio/video inputs including composite, S-Video, and component video, digital optical and coaxial inputs, speaker A/B switching, and remote control. Powered by 120V AC, 60Hz. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: Main unit with front panel controls, Remote Control, Speaker terminals, Audio/Video inputs, Digital inputs, AM/FM antenna terminals.

Feature	Description
Dolby Digital/DTS decoding	5.1 channel surround sound processing
Multi-room audio	Zone 2 audio output capability
AM/FM tuner	40 station presets (20 AM, 20 FM)
Speaker A/B switching	Select between two speaker sets
Digital inputs	Optical and coaxial digital audio inputs
Video inputs	Composite, S-Video, and component video
Audio inputs	Multiple stereo audio inputs
Headphone jack	Front panel 1/4" headphone output
AC power input	Standard AC power connector
Remote sensor	Infrared receiver for remote control

Installation

Unpack and inspect contents. Place in well-ventilated area.

1. Connect speakers: Use speaker wire to connect front, center, surround speakers to appropriate terminals.
2. Connect audio sources: Use RCA cables for CD player, tape deck, etc.
3. Connect video sources: Use composite, S-Video, or component cables for DVD player, cable box, etc.
4. Connect antennas: Attach AM loop antenna and FM wire antenna.
5. Plug into AC power.

WARNING! Ensure proper ventilation; do not block vents. Use correct speaker impedance.

First-Time Setup

Power on receiver; follow initial setup procedure.

1. Set speaker configuration: Access setup menu to configure speaker size and distance.
2. Tune radio stations: Use auto-scan to program AM/FM stations.
3. Set input assignments: Assign audio/video sources to specific inputs.
4. Configure surround mode: Select preferred surround sound processing.
5. Test speaker output: Use test tone to verify all speakers are working.

CAUTION! Ensure all connections are secure before powering on.

Specifications

• Power Output: 100 watts per channel (front), 50 watts (center/surround)
• Audio Formats: Dolby Digital, DTS, Pro Logic
• Tuner: AM/FM with 40 presets
• Inputs: 4 audio, 3 video, 2 digital (optical/coaxial)
• Outputs: 5.1 channel audio, Zone 2 audio, video monitor
• Frequency Response: 20Hz - 20kHz
• Signal-to-Noise: 90dB
• Power Consumption: 250W maximum
• Dimensions: 17.1" W × 6.3" H × 15.7" D
• Weight: 22 lbs

Controls and Settings

Front Panel: POWER, VOLUME, INPUT SELECT, SPEAKERS A/B, TUNER PRESETS, HEADPHONE.

Remote: POWER, INPUT SELECT, VOLUME, MUTE, SURROUND MODE, TUNER, NUMERIC, MENU.

Audio Settings: Bass, Treble, Balance, Loudness, Surround Mode (Dolby Digital, DTS, Pro Logic). Video Settings: Input source selection. Tuner: Preset memory, Auto-scan. System: Speaker configuration, Distance settings, Test tone.

Connecting Devices

Audio: CD player, tape deck, turntable (with phono preamp). Video: DVD player, cable/satellite box, gaming console. Digital: CD transport, DVD player with digital output.

1. Turn off all devices before connecting.
2. Match cable colors to input jacks (red/white for audio).
3. Use digital cables for best audio quality when available.
4. Select input via INPUT SELECT button or remote.

Tip: Use high-quality cables for best performance.

Audio/Video Operation

Supports various audio and video sources.

1. Select input: Press INPUT SELECT to choose source (CD, DVD, TUNER, etc.).
2. Adjust volume: Use VOLUME control on front panel or remote.
3. Select surround mode: Choose Dolby Digital, DTS, or Pro Logic as appropriate.
4. Use tuner: Tune AM/FM stations and store presets.
5. Speaker selection: Use A/B buttons to select speaker sets.
6. Headphone use: Plug headphones into front jack; speakers mute automatically.

WARNING! Do not operate at maximum volume for extended periods.

Multi-Room Audio

Zone 2 capability for second room audio.

1. Connect Zone 2 speakers to dedicated terminals.
2. Select Zone 2 source using remote control.
3. Adjust Zone 2 volume independently.
4. Zone 2 operates in stereo mode only.

Care & Cleaning

Unplug before cleaning. Use soft, dry cloth for exterior. Use compressed air for vents.

CAUTION! Do not use liquid cleaners. Keep away from moisture and heat sources.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © Marantz America, Inc. Dolby and DTS are registered trademarks. For support, visit www.marantz.com or contact 1-800-270-2873.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No sound	Speaker connections/mute	Check speaker wires; ensure mute is off; verify input selection.
No power	Power cord/outlet	Check power connection; try different outlet; check fuse.
Poor radio reception	Antenna placement	Reposition AM/FM antennas; ensure proper connection.
Remote not working	Batteries/obstacles	Replace batteries; ensure clear path to IR sensor.
Overheating	Ventilation	Ensure adequate ventilation; clear vents of obstructions.
No surround sound	Source/connections	Verify digital connection; check source output format.

Reset: Disconnect power for 30 seconds to reset microprocessor.

Service: 1-800-270-2873; www.marantz.com