Marantz RC5500SR Remote Control Manual

The Marantz RC5500SR is a universal remote control designed to operate multiple audio/video components with advanced programming capabilities, learning function, macro commands, and backlit keys. Compatible with various brands including Marantz, Denon, Sony, Pioneer, and others. Features include LCD display, direct code entry, device selection keys, macro programming, and learning mode for custom commands.

Features at a Glance

Key components: LCD display, Device selection keys, Numeric keypad, Navigation controls, Macro buttons, Learning sensor, Backlit keys.

Installation & Setup

Prepare remote for use with your audio/video components.

1. Install batteries: Open battery compartment, insert 2 AA batteries observing polarity.
2. Select device: Press corresponding device button (TV, DVD, etc.).
3. Program remote: Use auto-search or direct code entry method.
4. Test functions: Verify basic commands work properly.

WARNING! Use correct battery type; do not mix old and new batteries.

Battery Installation

Proper battery installation ensures optimal performance.

1. Turn remote over and locate battery compartment cover.
2. Slide cover open according to arrow direction.
3. Insert 2 AA batteries, observing correct polarity (+/-).
4. Replace cover and slide until it clicks into place.

CAUTION! Remove batteries if remote will not be used for extended periods.

Specifications

• Power Source: 2 x AA batteries
• Battery Life: Approximately 6 months with normal use
• Operating Range: Up to 25 feet
• IR Frequency: Standard 38kHz
• Learning Capacity: Up to 256 commands
• Macro Memory: Stores multiple command sequences
• Compatibility: Works with most major AV brands
• Dimensions: Standard remote control size
• Weight: Lightweight ergonomic design

Controls and Functions

Front panel layout: Device selection keys across top, navigation cluster in center, numeric keypad below.

Key Functions: POWER, DEVICE SELECT (TV, VCR, DVD, CD, AUX, CBL/SAT), NUMERIC (0-9), VOLUME, CHANNEL, MUTE, MENU, GUIDE, INFO, EXIT, ARROW KEYS, ENTER, PLAY, STOP, PAUSE, FF, REW, MACRO, LEARN.

LCD Display: Shows active device, macro status, battery level indicator. Backlight: Activates automatically in low light or via dedicated button.

Programming the Remote

Two programming methods: Auto-search and Direct Code Entry.

1. Auto-search Method: Press and hold device key until LED blinks twice, point at device, press POWER repeatedly until device turns off, press ENTER to save.
2. Direct Code Entry: Press and hold device key, enter 3-digit code from code list, release device key, test functions.
3. Learning Method: Use LEARN button to teach commands from original remotes.

Tip: Keep code list handy for quick reference during programming.

Learning Function

Teach the remote commands from your original equipment remotes.

1. Press and hold LEARN button until LED illuminates.
2. Press the button on Marantz remote you want to program.
3. Point original remote at learning sensor (front of Marantz remote).
4. Press corresponding button on original remote.
5. LED blinks to confirm learning, then turns off.
6. Test learned command to verify operation.

WARNING! Keep original remote 1-3 inches from learning sensor during process.

Macro Programming

Create sequences of commands for one-button operation.

1. Press and hold MACRO button until LED lights.
2. Press macro button (M1, M2, etc.) to store sequence.
3. Enter commands in desired sequence with 1-second pauses.
4. Press MACRO button again to end programming.
5. Test macro by pressing assigned macro button.

Example: M1 macro: Turn on TV, switch to HDMI1, turn on DVD player, start playback.

Troubleshooting

Reset: Remove batteries, press all buttons for 30 seconds, reinstall batteries.

Service: Contact Marantz support or authorized service center

Care & Maintenance

Clean with dry cloth only; avoid liquids and abrasive cleaners.

CAUTION! Do not expose to extreme temperatures or moisture. Store in dry location.