Marantz RC5200SR Manual

The Marantz RC5200SR is a universal remote control system designed for home theater integration, featuring learning capabilities, macro programming, LCD display, backlit buttons, device control for up to 8 components, RF/IR transmission, charging dock, and compatibility with major audio/video brands. Below are key sections for setup, programming, operation, and troubleshooting.

Features at a Glance

Key components: Universal remote with LCD display, Charging Dock, RF Transmitter, IR Blaster, Setup Manual.

Installation & Setup

Unpack and inspect contents. Place charging dock in convenient location.

1. Charge remote: Place remote in charging dock for initial 4-hour charge.
2. Install batteries: Insert rechargeable batteries if required.
3. Position RF transmitter: Place near components for optimal signal.
4. Connect IR blasters: Attach to components in enclosed spaces.

WARNING! Use only Marantz-approved power adapter. Keep away from liquids.

Programming Devices

Power on remote; follow on-screen prompts.

1. Select device type: Press DEVICE button (TV, DVD, CABLE, etc.).
2. Enter setup mode: Press and hold SETUP until LED blinks.
3. Enter code: Use numeric keys to enter manufacturer code.
4. Test functions: Verify power, volume, and menu controls work.
5. Use learning function: For unsupported devices, learn from original remote.

CAUTION! Keep original remotes for learning function.

Specifications

• Display: 2.5-inch LCD touchscreen with backlight.
• Transmission: Dual RF (433MHz) and IR (38kHz).
• Battery: Rechargeable NiMH, 7.2V 600mAh.
• Charging Time: 4 hours for full charge.
• Operating Range: Up to 30 feet RF, 20 feet IR.
• Memory: Stores up to 50 macros and 8 devices.
• Compatibility: Works with 5000+ device codes.
• Power Source: Charging dock (12V DC).
• Dimensions: Remote: 8.5 x 2.5 x 1.5 inches.

Controls and Functions

Access functions via LCD display or hard buttons. Front Panel: POWER, DEVICE, VOLUME, MUTE, MENU, GUIDE.

LCD Functions: Device selection, Macro buttons, Help, Setup, Favorite channels.

Programming: Code entry, Learning mode, Macro recording. Operation: Device switching, Volume control, Input selection, Transport controls (Play, Stop, Pause). Settings: Backlight timer, Button beep, LCD contrast, RF channel selection.

Macro Programming

Create command sequences for complex operations.

1. Enter macro mode: Press MACRO button on LCD.
2. Record sequence: Press commands in desired order.
3. Add delays: Insert pauses between commands as needed.
4. Save macro: Assign to LCD soft button.
5. Test: Execute macro to verify operation.

Tip: Use macros for "Watch Movie" (TV on, input select, DVD on, play).

Learning Function

Learn commands from original remotes for unsupported devices.

1. Enter learn mode: Press LEARN on LCD.
2. Position remotes: Point original remote at RC5200SR sensor.
3. Press button: On original remote, then on RC5200SR.
4. Confirm: LED blinks when command learned successfully.
5. Repeat: For all required buttons.

WARNING! Ensure good battery power in both remotes during learning.

LCD Display Features

Customizable touchscreen interface with context-sensitive controls.

• Device Pages: Separate control layouts for each component
• Favorite Channels: One-touch channel selection
• Macro Buttons: User-defined command sequences
• Help Screens: Guided troubleshooting
• Status Indicators: Battery level, active device, RF signal

Care & Maintenance

Clean with dry, soft cloth only. Avoid chemicals and moisture.

CAUTION! Do not expose to extreme temperatures. Charge monthly if not in use.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits. Copyright © 2006 Marantz; trademarks of D&M Holdings. For support, visit www.marantz.com or contact 1-800-270-2745.

Troubleshooting

Reset: Remove batteries for 30 seconds to reset memory.

Service: 1-800-270-2745; www.marantz.com