marantz rc3200 remote control manual

The Marantz RC3200 is a universal learning remote control designed to operate multiple audio/video components. Features include LCD touch screen, backlighting, macro programming, device learning capability, and compatibility with various brands. Supports up to 10 devices including TV, DVD, VCR, CD, Cable, Satellite, and Audio components. Below are key sections for features, setup, programming, operation, and troubleshooting.

1. Features at a Glance 2. Initial Setup 3. Device Programming 4. Specifications 5. Controls and Functions 6. Learning Function 7. Macro Programming 8. LCD Screen Operation 9. Battery and Maintenance 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: LCD touch screen, backlit buttons, learning capability, macro programming, device memory.

Feature	Description
LCD Touch Screen	Programmable soft keys for custom functions
Learning Capability	Learns commands from original remotes
Macro Programming	Records sequences of up to 64 commands
Backlit Buttons	Illuminated keys for low-light operation
Device Memory	Stores codes for up to 10 different devices
Power Source	4 AA batteries (included)
LCD Backlight	Illuminates screen for easy viewing
Help Function	Assists with setup and troubleshooting
Code Search	Automatically finds correct device codes
Volume Lock	Locks volume control to specific device

Initial Setup

Install batteries and prepare for programming.

Battery installation: Open battery compartment, insert 4 AA batteries observing polarity.
LCD calibration: Follow on-screen prompts to calibrate touch screen if required.
Select language: Choose preferred language from setup menu.
Test basic functions: Verify power and basic button operation.

WARNING! Use only fresh batteries; do not mix old and new batteries. Observe correct polarity.

Device Programming

Program remote to control your audio/video components.

Select device: Press DEVICE button, choose device type (TV, DVD, etc.).
Enter code: Use code search or enter manufacturer code manually.
Test operation: Point remote at device and test power and volume functions.
Repeat for additional devices: Program up to 10 different devices.

CAUTION! Keep original remotes for learning function. Program in well-lit area.

Specifications

Power Source: 4 AA batteries
Battery Life: Approximately 3-6 months with normal use
Transmission: Infrared (IR)
Operating Range: Up to 30 feet
Memory Capacity: Stores codes for 10 devices
Learning Capacity: Up to 256 learned commands
Macro Memory: 10 macros with up to 64 commands each
LCD Screen: Backlit touch screen display
Dimensions: Standard remote control size
Weight: Lightweight ergonomic design

Controls and Functions

Access functions via physical buttons and LCD touch screen.

Physical Buttons: POWER, DEVICE, VOLUME, CHANNEL, MUTE, NUMERIC, HELP, LCD BACKLIGHT.

LCD Functions: Custom soft keys, macro buttons, device selection, setup menus. Programming: Code entry, learning mode, macro recording, device setup. Operation: Device selection, volume control, channel control, input selection, transport controls.

Learning Function

Learn commands from original remote controls.

Enter learning mode: Press LEARN button, select target button on RC3200.
Position remotes: Point original remote at RC3200's IR sensor (3-5 cm distance).
Transmit command: Press and hold button on original remote until learned.
Test learned command: Verify operation with target device.
Repeat: Learn additional commands as needed.

Tip: Ensure good battery power in both remotes. Learn in normal room lighting.

Macro Programming

Record sequences of commands for one-touch operation.

Enter macro mode: Press MACRO button, select macro number (1-10).
Record commands: Press buttons in desired sequence (up to 64 commands).
Add delays: Insert pauses between commands if needed.
Save macro: Press MACRO button again to save sequence.
Assign to button: Assign macro to LCD soft key for easy access.
Test macro: Execute macro to verify proper operation.

WARNING! Test macros thoroughly. Include adequate delays between commands.

LCD Screen Operation

Customize LCD touch screen for personalized control.

Access LCD setup: Press SETUP, select LCD configuration.
Create soft keys: Assign functions to customizable LCD buttons.
Organize layout: Arrange buttons for intuitive operation.
Set backlight duration: Adjust LCD backlight timeout.
Save configuration: Store custom LCD layouts.

Battery and Maintenance

Replace batteries when LCD dims or remote becomes unresponsive.

CAUTION! Remove batteries if remote not used for extended periods. Clean with dry cloth only.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © Marantz; trademarks of respective owners. For support, visit www.marantz.com or contact authorized service centers.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Remote not working	Dead batteries	Replace all 4 AA batteries
Cannot learn commands	Low battery/position	Replace batteries; ensure 3-5 cm distance between remotes
Macro not executing	Insufficient delays	Re-record macro with longer pauses between commands
LCD screen dim	Battery power low	Replace batteries; adjust backlight settings
Commands not transmitting	IR sensor blocked	Ensure clear path to device; clean IR window

Reset: Remove batteries for 30 seconds to reset memory.

Service: Contact authorized Marantz service center for repairs.