Marantz RC026SR Manual

The Marantz RC026SR is a universal remote control designed for audio/video equipment, featuring learning capability, macro functions, device control for TV, DVD, VCR, SAT, and AMP, LCD display with backlight, direct code entry, and programmable buttons. Compatible with most major brands and supports infrared control. Below are key sections for features, setup, programming, operation, and troubleshooting.

Features at a Glance

Key components: LCD display with backlight, learning IR sensor, macro programming, device selection buttons, numeric keypad, navigation controls.

Feature	Description
LCD Display	Backlit screen showing device and function information
Learning Function	Can learn commands from other remotes
Macro Programming	Records sequences of commands for one-button operation
Device Control	TV, DVD, VCR, SAT, AMP device modes
Numeric Keypad	Direct channel/input selection
Navigation Controls	Directional pad for menu navigation
Volume/Mute	Audio control buttons
Power Controls	Individual device power and master power
Code Search	Automatic brand code detection
Battery Compartment	Holds 2 AA batteries

Initial Setup

Prepare remote for first use and basic device programming.

1. Install batteries: Open battery compartment, insert 2 AA batteries observing polarity.
2. Select device mode: Press TV, DVD, VCR, SAT, or AMP button to choose controlled device.
3. Program device code: Use auto code search or direct code entry for your equipment brand.
4. Test functions: Verify power, volume, and basic controls work with your device.

WARNING! Use correct battery type; do not mix old and new batteries. Ensure proper polarity.

Programming Instructions

Program remote to control your specific audio/video equipment.

1. Auto Code Search: Hold device button until LED blinks twice, then press POWER repeatedly until device turns off.
2. Direct Code Entry: Press and hold SETUP until LED blinks twice, enter 3-digit code from code list.
3. Learning Mode: Press LEARN button, point original remote at learning sensor, press buttons to teach commands.
4. Macro Programming: Press MACRO, record sequence of commands, assign to macro button.

CAUTION! Keep original remotes during learning process. Ensure fresh batteries for reliable programming.

Specifications

• Power Source: 2 x AA batteries (1.5V)
• Battery Life: Approximately 6-12 months with normal use
• Transmission: Infrared (IR)
• Operating Range: Up to 8 meters (26 feet)
• Angle: ±30 degrees
• Memory: Retains programming when batteries removed
• Learning Capacity: Up to 50 learned commands
• Macro Memory: Stores multiple command sequences
• Compatibility: Most major audio/video brands
• Dimensions: Standard remote control size

Button Functions

Primary control buttons and their functions across different device modes.

Device Selection: TV, DVD, VCR, SAT, AMP - selects controlled equipment type.

Navigation: Arrow buttons for menu navigation, OK/SELECT for confirmation.

Playback Controls: PLAY, PAUSE, STOP, FF, REW, PREV, NEXT for media control.

Audio/Video: VOLUME, MUTE, CHANNEL, INPUT, MENU, GUIDE, INFO.

Special Functions: LEARN, MACRO, SETUP, CODE SEARCH for programming.

Learning Function

Teach remote commands from original equipment remotes.

1. Press and hold LEARN button until LED lights steadily.
2. Point original remote at learning sensor (front of remote).
3. Press and hold button on original remote until LED blinks.
4. Press corresponding button on Marantz remote to assign learned command.
5. Repeat for additional commands; press LEARN to exit.

Tip: Test learned commands immediately. Keep original remotes 2-5 cm from learning sensor.

Macro Programming

Create single-button operations that execute multiple commands.

1. Press and hold MACRO button until LED lights.
2. Press macro button (1-4) to assign sequence.
3. Press series of commands in desired order with 1-second pauses.
4. Press MACRO again to save sequence.
5. Test macro by pressing assigned macro button.

WARNING! Macros may not work with all devices. Keep sequences under 20 commands for reliability.

Device Control

Control multiple audio/video components with single remote.

1. Switch between devices using TV, DVD, VCR, SAT, AMP buttons.
2. Master Power: Turns all programmed devices on/off simultaneously.
3. Input Selection: Switch between different input sources on compatible devices.
4. Volume Control: Adjust audio levels for different components.

Tip: Program all frequently used devices for convenient centralized control.

Battery Information

Use 2 AA alkaline batteries for optimal performance.

Battery Installation: Observe correct polarity (+/- markings). Replace both batteries simultaneously.

Battery Life: 6-12 months depending on usage, especially backlight and learning functions.

Low Battery Indicator: LED may flash or remote becomes unresponsive.

CAUTION! Do not mix battery types. Remove batteries if not used for extended periods.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © Marantz; all trademarks property of their respective owners. This device complies with part 15 of the FCC Rules. For support, visit www.marantz.com or contact authorized service centers.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Remote not working	Dead batteries/obstructions	Replace batteries; ensure clear path to device IR sensor.
Cannot program device	Wrong code/distance	Use correct brand code; reduce distance during programming.
Learning function fails	Weak original remote	Replace batteries in original remote; reduce distance to 2-5 cm.
Macro doesn't work	Timing issues	Reprogram with longer pauses between commands; test individual steps.
Buttons unresponsive	Battery/power issue	Check battery contacts; clean if corroded; reset remote by removing batteries.

Reset: Remove batteries, press all buttons for 30 seconds, reinstall batteries.

Service: Contact authorized Marantz service center; www.marantz.com