Marantz RC017SR Manual

The Marantz RC017SR is a universal remote control designed to operate various audio/video components including TVs, DVD players, audio systems, and streaming devices. Features include learning capability, macro programming, backlit buttons, device code library, and ergonomic design. Compatible with most major brands and supports infrared operation. Below are key sections for features, setup, programming, operation, and troubleshooting.

Features at a Glance

Key components: LCD display, backlit buttons, learning sensor, macro programming, device selection buttons, navigation pad.

Feature	Description
Learning capability	Can learn commands from original remotes
Macro programming	Program multiple commands into single button
Backlit buttons	Illuminated keys for low-light operation
Device code library	Pre-programmed codes for major brands
LCD display	Shows device mode and status information
Ergonomic design	Comfortable grip and intuitive button layout
Universal compatibility	Works with TVs, DVD players, audio systems, etc.
Battery indicator	Shows remaining battery life
Direct access buttons	Quick access to volume, channel, playback controls
Setup button	Access programming and configuration menus

Initial Setup

Unpack remote and install batteries.

1. Install batteries: Open battery compartment, insert 2 AA batteries observing polarity.
2. Power on: Remote will beep and display welcome screen.
3. Select language: Use navigation pad to choose preferred language.
4. Test basic functions: Point at device and test power button.

WARNING! Use correct battery type; do not mix old and new batteries. Remove batteries if not used for extended periods.

Programming Devices

Program remote to control your audio/video components.

1. Press DEVICE button: Select device type (TV, DVD, AUDIO, etc.).
2. Enter setup mode: Press and hold SETUP until LED blinks twice.
3. Enter code: Use numeric keys to enter manufacturer code.
4. Test operation: Point at device and test power and volume buttons.
5. Repeat for other devices: Program all components in your system.

Tip: Refer to code list in appendix for manufacturer codes.

Specifications

• Power Source: 2 x AA batteries
• Battery Life: Approximately 6 months with normal use
• Operating Range: Up to 30 feet
• Infrared Frequency: 38kHz standard
• Learning Memory: Up to 50 commands
• Macro Memory: Up to 5 macros with 10 commands each
• Compatibility: TVs, DVD/Blu-ray players, audio systems, streaming devices
• Weight: 150g (with batteries)
• Dimensions: 220mm x 50mm x 30mm

Button Functions

Primary controls: POWER, DEVICE selection, numeric keys, navigation pad, volume/channel, transport controls.

Device Buttons: TV, DVD, AUDIO, CABLE/SAT, AUX for component selection.

Navigation: Arrow keys, OK/SELECT, MENU, EXIT, BACK.

Transport: PLAY, PAUSE, STOP, RECORD, FF, REW, SKIP.

Special Functions: SETUP, LEARN, MACRO, BACKLIGHT, MUTE.

Learning Function

Teach remote commands from original remotes.

1. Press LEARN button: LED will blink slowly.
2. Select target button: Press button you want to program.
3. Point remotes: Place original remote 2-3 inches from learning sensor.
4. Press original button: Hold until LED blinks rapidly.
5. Test learned command: Point at device and test new function.
6. Repeat: Learn additional commands as needed.

Note: Some special functions may not be learnable.

Macro Programming

Create single-button sequences for multiple commands.

1. Press MACRO button: LED indicates macro mode.
2. Select macro slot: Choose from M1-M5.
3. Record sequence: Press buttons in desired order.
4. End recording: Press MACRO again to save.
5. Assign macro: Press target button, then macro number.
6. Test macro: Press assigned button to execute sequence.

Tip: Add 1-second delays between device changes in macros.

Advanced Settings

Access advanced configuration options.

1. Press SETUP: Enter setup menu.
2. Navigate options: Use arrow keys to select settings.
3. Adjust backlight: Set duration or auto-off timing.
4. Reset functions: Factory reset or clear specific memories.
5. Key repeat: Adjust repeat rate for volume/channel buttons.
6. Lock settings: Prevent accidental programming changes.

Battery Replacement

Replace batteries when performance decreases.

1. Open compartment: Slide cover off battery bay.
2. Remove old batteries: Dispose of properly.
3. Insert new batteries: Observe correct polarity.
4. Close compartment: Ensure secure fit.
5. Test operation: Verify all functions work properly.

CAUTION! Do not mix battery types or use damaged batteries.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits. CE certified for European markets. Copyright © 2025 Marantz; trademarks of Sound United LLC. For technical support, visit www.marantz.com or contact 1-800-288-2284. Dispose of batteries according to local regulations.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Remote not working	Dead batteries/obstacles	Replace batteries; ensure line of sight to device.
Cannot learn commands	Distance/original remote	Place remotes 2-3 inches apart; use working original remote.
Macro not executing	Timing/device selection	Add delays between commands; ensure correct device mode.
Buttons unresponsive	Battery/low memory	Check battery level; reset remote to factory settings.
Limited range	Battery/obstacles	Replace batteries; remove obstacles between remote and device.

Reset: Remove batteries, press all buttons for 10 seconds, reinstall batteries.

Service: 1-800-288-2284; www.marantz.com