marantz rc003sr manual

The Marantz RC003SR is a universal remote control designed to operate various audio/video components including TVs, DVD players, audio systems, and other home entertainment devices. Features include learning capability, macro functions, device selection buttons, LCD display, backlight, programmable codes, and ergonomic design for comfortable operation. Below are key sections for features, setup, programming, operation, and troubleshooting.

Features at a Glance

Key components: LCD display, device selection buttons, navigation pad, number keys, function buttons, learning sensor, battery compartment.

Package Contents

Unpack and verify all components are present.

1. Marantz RC003SR Universal Remote Control
2. 2 AA Batteries
3. User Manual
4. Warranty Information Card

NOTE! Inspect contents for damage before use. Contact retailer if any items are missing.

Initial Setup

Prepare remote for first use and basic configuration.

1. Install batteries: Open battery compartment, insert 2 AA batteries observing polarity.
2. Power on: Remove battery insulator if present; remote should power up automatically.
3. Select device: Press corresponding device button (TV, DVD, etc.) to begin programming.
4. Program codes: Use auto-search or direct code entry to program devices.

CAUTION! Insert batteries with correct polarity to avoid damage.

Specifications

• Power Source: 2 x AA batteries (3V DC)
• Battery Life: Approximately 6-12 months with normal use
• Operating Range: Up to 8 meters (26 feet)
• Angle: ±30 degrees from center
• Learning Capacity: Up to 50 commands
• Macro Memory: Stores up to 5 macros with 16 steps each
• Supported Devices: TV, DVD, VCR, Audio, Cable, Satellite, Game Console
• Infrared Frequency: 38kHz carrier frequency
• Dimensions: Standard remote size for comfortable handling
• Weight: Lightweight ergonomic design

Controls and Functions

Understanding remote layout and button functions.

Top Section: LCD display shows active device and mode. Device selection buttons (TV, DVD, AUDIO, CBL/SAT, AUX).

Center Section: Navigation pad (up, down, left, right, OK/enter). Number keys 0-9. Volume and channel controls.

Bottom Section: Transport controls (play, pause, stop, record, skip). Function buttons (menu, guide, info, exit). Power and mute buttons.

Special Functions: Learning mode activation, macro programming, backlight control, setup menu access.

Programming the Remote

Three methods to program devices: Auto-search, Direct Code Entry, Learning.

1. Auto-search method: Press and hold device button until LED blinks twice, then press POWER repeatedly until device turns off.
2. Direct code entry: Find code in code list, press and hold device button, enter 4-digit code using number keys.
3. Test functions: Verify volume, channel, and power controls work properly.
4. Store code: Press device button to store the programmed code.

Tip: Keep code list handy for future reference and additional device programming.

Learning Function

Teach commands from original remotes to Marantz remote.

1. Enter learning mode: Press and hold LEARN button until LED lights.
2. Select target button: Press the button you want to program on Marantz remote.
3. Align remotes: Point original remote at learning sensor (front of Marantz remote).
4. Transmit command: Press and hold corresponding button on original remote until LED blinks.
5. Repeat: Program additional commands as needed.
6. Exit learning: Press LEARN button to exit learning mode.

WARNING! Keep remotes steady and close (2-3 inches) during learning process.

Macro Programming

Create sequences of commands for one-touch operation.

1. Enter macro mode: Press and hold MACRO button until LED lights.
2. Select macro button: Press 1-5 to select macro memory location.
3. Record sequence: Press buttons in desired sequence (max 16 steps).
4. Add delays: Press DELAY button to insert pauses between commands.
5. Save macro: Press MACRO button again to save sequence.
6. Test macro: Press selected macro button to execute sequence.

Common macros: "Watch DVD" (TV on, input select, DVD on, play), "Listen to Music" (Audio on, CD input, play).

Battery Replacement

Replace batteries when remote becomes unresponsive or LCD dims.

1. Open battery compartment: Slide cover off back of remote.
2. Remove old batteries: Note polarity orientation.
3. Insert new batteries: 2 AA batteries, correct polarity.
4. Close compartment: Replace cover securely.
5. Test remote: Verify all functions work properly.

CAUTION! Use fresh batteries only; do not mix old and new batteries.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Copyright © Marantz; all rights reserved. For support, visit www.marantz.com or contact customer service.

Troubleshooting

Reset: Remove batteries, press all buttons for 30 seconds, reinstall batteries.

Service: Contact Marantz customer support or visit www.marantz.com