marantz pmd580 manual download

The Marantz PMD580 is a professional portable digital recorder featuring built-in stereo microphones, XLR inputs with phantom power, USB connectivity, SD card storage, and multiple recording formats. Below are key sections covering features, operation, specifications, and troubleshooting for this professional audio recording device.

1. Features at a Glance 2. Installation & Setup 3. Basic Operation 4. Technical Specifications 5. Controls and Functions 6. Recording Settings 7. File Management 8. USB Connectivity 9. Maintenance & Care 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Built-in stereo microphones, XLR inputs with +48V phantom power, SD card slot, USB 2.0 port, LCD display, and professional recording capabilities.

Feature	Description
Built-in Microphones	Professional stereo condenser microphones
XLR Inputs	Balanced inputs with phantom power
Recording Formats	WAV (44.1/48kHz) and MP3
Storage	SD/SDHC card slot
USB Port	For file transfer and power
LCD Display	Backlit display for settings and levels
Power Source	AA batteries or USB power
Headphone Output	3.5mm stereo jack with level control
Line Input	3.5mm stereo line input
Digital Output	Optical digital output

Installation & Setup

Unpack and inspect contents. Prepare for first use.

Insert batteries: Install 2 AA batteries in compartment.
Insert SD card: Format card using menu system before first use.
Connect microphones: Use XLR inputs for external mics with phantom power if needed.
Power on: Slide power switch to ON position.

WARNING! Use only recommended SD cards. Format card in device before first use.

Basic Operation

Power on device; configure basic settings.

Select recording source: Choose built-in mics, line in, or XLR inputs.
Set recording format: Choose WAV or MP3 with desired quality settings.
Adjust input levels: Use level controls and monitor with headphones.
Start recording: Press REC button; pause with PAUSE, stop with STOP.

CAUTION! Always monitor recording levels to prevent distortion.

Technical Specifications

Recording Formats: WAV (44.1kHz/48kHz, 16/24-bit), MP3 (32-320kbps)
Frequency Response: 20Hz-20kHz
Signal-to-Noise Ratio: >90dB
Inputs: XLR (mic/line), 3.5mm line in, built-in mics
Outputs: Headphone, line out, USB, optical digital
Power Supply: 2x AA batteries or USB 5V DC
Battery Life: Approx. 4 hours (alkaline batteries)
Storage: SD/SDHC cards up to 32GB
Dimensions: 150 x 65 x 35 mm
Weight: 250g (without batteries)

Controls and Functions

Access menu system via MENU button. Front Panel: POWER, REC, STOP, PLAY, MENU, navigation buttons.

Side Panel: Input level controls, headphone volume, input selection switches.

Recording Settings: Input source selection, recording format, sample rate, bit depth, input level adjustment. Playback: File navigation, playback speed control, A-B repeat. System: Date/time setting, LCD contrast, auto power off, format card.

Recording Settings

Configure recording parameters for optimal audio quality.

Access REC SETTING menu from main menu.
Select recording format: WAV (uncompressed) or MP3 (compressed).
Set sample rate: 44.1kHz or 48kHz for WAV files.
Adjust input level: Use manual controls or auto level function.
Enable low cut filter: Reduce low frequency noise if needed.

Tip: Use WAV format for critical recordings, MP3 for extended recording time.

File Management

Organize and manage recorded files on SD card.

View files: Use FILE menu to browse recordings.
Playback files: Select file and press PLAY button.
Delete files: Use DELETE function in file menu.
Create folders: Organize recordings by date or project.
Protect files: Mark important files as read-only.

WARNING! Always stop recording properly before removing SD card.

USB Connectivity

Connect to computer for file transfer and power.

Connect USB cable: Use supplied USB cable to connect to computer.
Select USB mode: Choose storage mode or charge mode.
Transfer files: Drag and drop files between device and computer.
Disconnect safely: Use computer's eject function before disconnecting.

Maintenance & Care

Keep device clean and properly maintained.

Use soft, dry cloth for cleaning. Avoid liquids and harsh chemicals. Store in protective case when not in use.

CAUTION! Do not expose to extreme temperatures or moisture.

Regulatory Information

FCC Part 15: Class B digital device compliant. CE marked for European market. Copyright © Marantz Professional. For technical support, visit www.marantzprofessional.com or contact authorized service centers.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power	Batteries/USB	Check battery installation; try USB power; replace batteries.
SD card error	Card format/compatibility	Format card in device; use recommended SD card types.
No recording	Input source/settings	Check input source selection; verify recording format settings.
Distorted audio	Input level too high	Reduce input level; enable limiter function.
USB not recognized	Cable/computer	Try different USB cable; check computer USB port; restart device.

Reset: Menu > System > Initialize to factory settings if needed.

Service: Contact authorized Marantz Professional service center for repairs.