Marantz PMD-602A Manual

The Marantz PMD-602A is a professional portable audio recorder featuring high-quality stereo recording capabilities, built-in microphones, XLR inputs with phantom power, digital recording formats, USB connectivity, rechargeable battery, LCD display, and professional audio controls. Designed for field recording, interviews, and music capture. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: Professional stereo recorder, built-in condenser microphones, XLR inputs, USB port, LCD display, rechargeable battery, SD card slot.

Installation

Unpack and inspect contents. Ensure all components are present.

1. Insert battery: Open battery compartment, insert rechargeable battery.
2. Insert SD card: Format card in device before first use.
3. Connect external mics: Use XLR inputs for professional microphones.
4. Charge device: Connect to power source for initial charge.

WARNING! Use only recommended power supplies and accessories. Do not expose to moisture.

First-Time Setup

Power on device; configure initial settings.

1. Format SD card: Use MENU > SYSTEM > Format to prepare card.
2. Set recording format: Choose WAV or MP3 format and quality settings.
3. Configure input levels: Set microphone sensitivity and input gain.
4. Set date/time: Configure system clock for file time-stamping.

CAUTION! Always format SD card in the device for optimal performance.

Specifications

• Recording Format: WAV (16/24-bit), MP3
• Sample Rates: 44.1kHz, 48kHz, 96kHz
• Inputs: XLR (phantom power), 3.5mm mic/line
• Outputs: Headphone, Line out, USB
• Storage: SD/SDHC cards up to 32GB
• Power: Rechargeable battery, AC adapter
• Frequency Response: 20Hz - 20kHz
• Signal-to-Noise: >90dB

Controls and Settings

Front panel: POWER, RECORD, STOP, PLAY, MENU, navigation buttons.

Menu System: Recording settings, playback options, system configuration, file management.

Recording: Input level adjustment, format selection, limiter, low-cut filter. Playback: File navigation, marking, deleting. System: Clock, display settings, power management, format utility.

Connecting Devices

Microphones: XLR inputs for balanced mics, 3.5mm for consumer mics. Monitoring: Headphone output. Computer: USB for file transfer.

1. Turn off device before connecting external equipment.
2. Use quality cables for optimal signal integrity.
3. Enable phantom power only for compatible microphones.

Tip: Always monitor recording levels through headphones during setup.

Recording Operations

Professional recording with built-in mics or external sources.

1. Prepare: Check battery level and available storage.
2. Set levels: Adjust input gain for optimal recording level.
3. Record: Press RECORD to start; monitor levels during recording.
4. Pause: Use PAUSE for temporary stops in recording.
5. Stop: Press STOP to end recording session.
6. File naming: Automatic file naming with time-stamp.
7. Marker function: Add markers during recording for easy navigation.
8. Auto-record: Voice-activated recording available.

WARNING! Avoid recording at maximum levels to prevent distortion.

Playback Features

High-quality audio playback with navigation and editing functions.

1. File selection: Navigate through recorded files.
2. Playback controls: Play, pause, fast forward, rewind.
3. Marker navigation: Jump between markers in files.
4. File management: Delete, protect, organize recordings.
5. USB transfer: Connect to computer for file copying.

Care & Maintenance

Keep device clean and dry. Store in protective case when not in use.

CAUTION! Do not expose to extreme temperatures. Clean with dry cloth only.

Regulatory Information

FCC Part 15 compliant. CE marked. Manufactured to professional audio standards. Copyright © Marantz Professional. For technical support, visit www.marantzpro.com or contact authorized service centers.

Troubleshooting

Reset: Menu > System > Factory Reset if available.

Service: Contact authorized Marantz service center for repairs.