marantz pm 8200 manual

The Marantz PM 8200 is a high-quality integrated stereo amplifier featuring advanced audio circuitry, multiple input options, phono stage, tone controls, and high-current power supply. With 100W per channel (8Ω), gold-plated connectors, and Marantz's signature sound quality, this amplifier delivers exceptional audio performance for audiophiles and music enthusiasts. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operation Modes 8. Audio Features 9. Care & Maintenance 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: High-current power amplifier, Phono input, Multiple line inputs, Pre-out/Main-in connectors, Headphone output, Remote control.

Feature	Description
Power Output	100W + 100W (8Ω, 20Hz-20kHz)
Phono Input	MM (Moving Magnet) cartridge compatible
Line Inputs	CD, Tuner, Aux, Tape 1, Tape 2
Pre-out/Main-in	For system expansion and bi-amping
Headphone Output	1/4" stereo jack for private listening
Tone Controls	Bass, Treble, and Balance adjustments
Speaker Selector	A/B speaker outputs
Remote Control	Infrared remote for basic functions
Power Supply	High-current toroidal transformer
Construction	Gold-plated connectors, aluminum front panel

Installation

Unpack and inspect contents. Place on stable, level surface with adequate ventilation.

Connect speakers: Use high-quality speaker cables to A/B speaker terminals.
Connect audio sources: Use appropriate cables for CD player, turntable, tuner, etc.
Connect power cord: Plug into AC power outlet.
Ensure proper ventilation: Leave minimum 10cm clearance around amplifier.

WARNING! Amplifier generates heat during operation; ensure adequate ventilation. Use proper gauge speaker cables.

First-Time Setup

Power on amplifier; allow warm-up time for optimal performance.

Select input source: Rotate INPUT selector to desired source (CD, Phono, etc.).
Adjust volume: Start with volume at minimum, gradually increase to desired level.
Set tone controls: Begin with flat response (12 o'clock position).
Speaker selection: Choose A/B speakers using front panel switch.
Phono setup: Connect turntable to PHONO input for MM cartridges only.

CAUTION! Always turn volume to minimum before powering on/off to prevent speaker damage.

Specifications

Power Output: 100W + 100W (8Ω, 20Hz-20kHz, 0.02% THD)
Frequency Response: 5Hz-50kHz (+1/-3dB)
Input Sensitivity: Phono: 2.5mV, Line: 200mV
Signal-to-Noise Ratio: Phono: 80dB, Line: 100dB
Total Harmonic Distortion: 0.02% (20Hz-20kHz)
Inputs: Phono (MM), CD, Tuner, Aux, Tape 1, Tape 2
Outputs: Pre-out, Tape out, Headphone
Power Consumption: 280W maximum
Dimensions: 440mm W × 135mm H × 385mm D
Weight: 12.5kg

Controls and Settings

Front Panel: POWER, INPUT SELECTOR, VOLUME, BASS, TREBLE, BALANCE, SPEAKER A/B, HEADPHONE.

Remote: POWER, VOLUME UP/DOWN, MUTE, INPUT SELECTION.

Tone Controls: Bass (±10dB at 100Hz), Treble (±10dB at 10kHz). Balance: Left/Right channel balance. Speaker Selection: A, B, A+B, or OFF. Input Selection: Phono, CD, Tuner, Aux, Tape 1, Tape 2. Headphone Output: Automatically mutes speakers when headphones connected.

Connecting Devices

Audio Sources: Use high-quality RCA cables for line-level inputs. Turntable: Connect to PHONO input (MM cartridges only).

Turn off amplifier before making connections.
Match left/right channels (red/white RCA connectors).
Use proper grounding for turntable connection.
For bi-amping: Use Pre-out/Main-in connectors with external power amplifier.

Tip: Keep audio cables away from power cords to minimize interference.

Operation Modes

Supports multiple listening configurations and source selections.

Source Selection: Rotate INPUT selector or use remote to choose source.
Volume Control: Use front knob or remote volume buttons.
Tone Adjustment: Fine-tune bass and treble to room acoustics.
Speaker Configuration: Select A, B, or both speaker sets.
Headphone Use: Plug in headphones to automatically mute speakers.
Tape Monitoring: Use TAPE MONITOR for recording/playback.
Direct Mode: Bypass tone controls for pure signal path.

WARNING! Do not operate with speakers disconnected. Avoid shorting speaker terminals.

Audio Features

Phono Stage: High-quality MM phono preamplifier. Tone Controls: Independent bass and treble adjustment. Balance Control: Left/right channel balance. Speaker Selection: Multiple speaker output options.

Care & Maintenance

Unplug before cleaning. Use soft, dry cloth for exterior. Avoid chemical cleaners.

CAUTION! Do not block ventilation slots. Keep away from moisture and extreme temperatures.

Regulatory Information

CE compliant; meets European safety and EMC standards. Copyright © Marantz. For support, visit www.marantz.com or contact authorized Marantz service centers. Manufactured under license from Sound United LLC.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No sound from speakers	Volume/Speaker selection	Check volume level; verify speaker selection; ensure cables connected properly.
Distorted sound	Overload/connections	Reduce volume; check speaker impedance; verify source connections.
Hum or noise	Grounding/cables	Check turntable ground; separate audio/power cables; verify cable quality.
Remote not working	Batteries/obstacles	Replace batteries; ensure line of sight to IR sensor; check range.
One channel silent	Balance/cables	Check balance control; verify RCA cable connections; test speakers.

Reset: Power cycle amplifier if abnormal operation occurs.

Service: Contact authorized Marantz service center; www.marantz.com