Marantz PM 10 Owner's Manual

The Marantz PM 10 is a high-end integrated amplifier featuring fully balanced dual-monaural design, Hyper Dynamic Amplifier Modules (HDAMs), high-current power supply, toroidal transformer, and advanced connectivity options. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operation Modes 8. Advanced Features 9. Care & Maintenance 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Fully balanced dual-monaural design, Hyper Dynamic Amplifier Modules, toroidal power transformer, high-quality audio inputs.

Feature	Description
Power Output	200W per channel (8Ω)
Amplifier Design	Fully balanced dual-monaural
HDAM Technology	Hyper Dynamic Amplifier Modules
Power Supply	High-current toroidal transformer
Inputs	XLR balanced, RCA unbalanced, Phono MM/MC
Outputs	Speaker terminals, Pre-out
Remote Control	Included with full system control
Display	High-resolution OLED
Build Quality	Copper-plated chassis, aluminum front panel
Protection Circuitry	Overload, short-circuit, thermal protection

Installation

Unpack and inspect contents. Place on stable, level surface with adequate ventilation.

Position amplifier: Allow minimum 10cm clearance on all sides for ventilation.
Connect speakers: Use high-quality speaker cables to appropriate terminals.
Connect audio sources: Use balanced XLR or unbalanced RCA cables.
Connect power cord: Use provided power cable and appropriate voltage.
Ground connection: Ensure proper grounding for phono inputs.

WARNING! Heavy unit - use two people for lifting. Ensure proper ventilation to prevent overheating.

First-Time Setup

Power on amplifier; allow warm-up time for optimal performance.

Input selection: Use INPUT selector to choose source (CD, Phono, etc.).
Volume control: Start with volume at minimum, gradually increase.
Balance adjustment: Use BALANCE control if needed.
Phono setup: Select MM/MC cartridge type and adjust loading.
Display settings: Adjust brightness and information display.

CAUTION! Always turn volume to minimum before powering on/off to prevent speaker damage.

Specifications

Power Output: 200W + 200W (8Ω, 20Hz-20kHz, 0.05% THD)
Frequency Response: 5Hz-50kHz (+0/-3dB)
Signal-to-Noise Ratio: 102dB (line inputs)
Total Harmonic Distortion: 0.005% (1kHz, 8Ω)
Input Sensitivity: 200mV (line), 0.5mV (MC), 2.5mV (MM)
Input Impedance: 47kΩ (line), 100Ω/470Ω (MC), 47kΩ (MM)
Dimensions: 440mm × 477mm × 194mm (W×D×H)
Weight: 28.5kg
Power Consumption: 260W (rated), 0.3W (standby)

Controls and Settings

Front panel: POWER, INPUT SELECTOR, VOLUME, BALANCE, PHONO LOADING, DISPLAY.

Remote: POWER, INPUT SELECTION, VOLUME UP/DOWN, MUTE, DISPLAY.

Input Selection: CD, AUX, PHONO, BALANCED 1, BALANCED 2. Phono Settings: MM/MC selection, impedance loading (100Ω/470Ω for MC). Display: OLED showing input, volume, settings. Protection: Automatic shutdown for overload, short-circuit, overheating.

Connecting Devices

Audio Sources: RCA unbalanced, XLR balanced inputs. Speakers: High-quality binding posts.

Turn off amplifier before making connections.
Use high-quality interconnects for best performance.
Match cable types to inputs (XLR for balanced, RCA for unbalanced).
Ensure secure speaker connections with proper polarity.
Connect turntable ground wire to ground terminal.

Tip: Keep signal cables away from power cables to minimize interference.

Operation Modes

Supports various audio sources and operation modes.

Source Selection: Rotate INPUT selector or use remote.
Volume Control: Use front knob or remote buttons.
Mute Function: Press MUTE to temporarily silence output.
Balance Adjustment: Use BALANCE for channel balance correction.
Phono Operation: Select MM/MC and appropriate loading.
Standby Mode: Auto-standby after period of inactivity.

WARNING! Do not operate with cover removed. High voltages present inside.

Advanced Features

Dual-Monaural Design: Separate amplification channels for superior channel separation. HDAM Technology: Discrete amplifier modules for superior sound quality. Balanced Operation: XLR inputs for noise rejection. Phono Stage: High-quality MM/MC phono preamplifier.

Care & Maintenance

Unplug before cleaning. Use soft, dry cloth for exterior. Avoid chemical cleaners.

CAUTION! Do not use liquid cleaners. Keep away from moisture and extreme temperatures.

Regulatory Information

Troubleshooting

Symptom	Possible Cause	Corrective Action
No sound	Input selection/volume	Check input selection; increase volume; check mute status.
Distorted sound	Overload/speakers	Reduce volume; check speaker impedance compatibility.
Hum or noise	Grounding/cables	Check ground connections; ensure proper cable routing.
Protection mode	Overload/short circuit	Turn off, check speaker wires for shorts, wait for cool-down.
Remote not working	Batteries/obstacles	Replace batteries; ensure clear line of sight to IR sensor.

Reset: Disconnect power for 30 seconds, then reconnect.

Service: Contact authorized Marantz service center; www.marantz.com