Marantz NR 1401 Manual

The Marantz NR 1401 is a slim 5.1-channel home theater receiver featuring 50 watts per channel, HDMI connectivity with 3 inputs and 1 output, audio return channel, Dolby TrueHD and DTS-HD Master Audio decoding, built-in phono input, Audyssey MultEQ auto calibration, multi-room audio capability, and network audio streaming compatibility. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: Slim chassis design, HDMI switching, phono input, Audyssey room correction, multi-zone audio capability.

Feature	Description
HDMI Inputs	3 HDMI inputs with audio return channel
Power Output	50W x 5 channels (8 ohms, 20Hz-20kHz)
Audio Decoding	Dolby TrueHD, DTS-HD Master Audio
Phono Input	Built-in phono stage for turntables
Audyssey MultEQ	Auto room calibration system
Multi-room Audio	Zone 2 audio output capability
Network Audio	Ethernet connectivity for streaming
Front Panel Inputs	USB, analog audio, headphones
Remote Control	Learning remote with backlight
Display	Fluorescent display with dimmer

Installation

Unpack and inspect contents. Place in well-ventilated area.

1. Connect speakers: Match polarity (+/-) for all 5.1 channels.
2. Connect HDMI sources: Use HDMI inputs for Blu-ray, game consoles, etc.
3. Connect TV: Use HDMI output to television.
4. Connect analog sources: Use phono input for turntable, other analog inputs.
5. Plug into AC power.

WARNING! Ensure adequate ventilation around receiver. Do not block ventilation openings.

First-Time Setup

Power on receiver; follow on-screen setup guide.

1. Run Audyssey calibration: Connect microphone, follow auto setup prompts.
2. Configure inputs: Assign names to HDMI and analog inputs.
3. Set speaker configuration: Small/large, crossover frequencies.
4. Configure network: Connect Ethernet cable for network features.
5. Test all inputs: Verify all sources are working properly.

CAUTION! Use included calibration microphone for optimal sound quality.

Specifications

• Amplifier Section: 50W x 5 channels (8 ohms, 20Hz-20kHz, 0.08% THD)
• HDMI: 3 inputs, 1 output with ARC
• Audio Formats: Dolby TrueHD, DTS-HD Master Audio, Dolby Digital, DTS
• Analog Inputs: Phono, 3 stereo audio, front panel aux
• Digital Inputs: 2 optical, 1 coaxial
• Video Inputs: 2 component, 3 composite
• Network: Ethernet port for streaming
• Power Consumption: 280W (rated), 0.3W (standby)
• Dimensions: 17.3" W x 4.1" H x 13.8" D

Controls and Settings

Access setup menu via remote or front panel. Front Panel: POWER, INPUT SELECT, VOLUME, TONE, SETUP.

Remote: POWER, INPUT SELECT, VOLUME, MUTE, AUDIO, TONE, SETUP, navigation buttons.

Audio Settings: Speaker configuration, crossover, distance, level calibration. Video Settings: HDMI control, resolution output. Network Settings: IP configuration, streaming services. System Settings: OSD language, auto standby, firmware updates.

Connecting Devices

HDMI: Primary connection for modern sources. Analog: Phono, CD player, tape deck. Digital: Optical/coaxial for legacy devices.

1. Turn off receiver and devices before connecting.
2. Use high-quality HDMI cables for best performance.
3. Match input types to source devices.
4. Select input via INPUT SELECT on remote or front panel.

Tip: Use HDMI for both audio and video when possible for simplest setup.

Audio Setup and Calibration

Audyssey MultEQ auto calibration optimizes sound for your room.

1. Connect calibration microphone to front panel.
2. Position microphone at primary listening position.
3. Follow on-screen prompts for multiple measurement positions.
4. Review and save calibration results.
5. Manual adjustments: Speaker levels, distance, crossover settings.
6. Tone controls: Bass, treble adjustments for personal preference.

WARNING! Maintain quiet environment during calibration measurements.

Network Features

Ethernet connectivity enables audio streaming and firmware updates.

1. Connect Ethernet cable to router or switch.
2. Configure network settings in setup menu.
3. Access internet radio and streaming services.
4. Check for firmware updates periodically.
5. Multi-room audio: Configure Zone 2 output.

Care & Maintenance

Unplug before cleaning. Use soft, dry cloth only; avoid liquids and aerosols.

CAUTION! Keep away from moisture and heat sources. Ensure proper ventilation at all times.

Regulatory Information

FCC Part 15: Class B digital device compliant with residential interference limits. Copyright © Marantz America, Inc. Dolby and DTS technologies licensed. For technical support, visit www.marantz.com or contact 1-800-370-3744.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No sound from speakers	Speaker wires/input selection	Check speaker connections; verify correct input selected.
No video through HDMI	HDMI handshake/issues	Power cycle devices; try different HDMI cable; check TV input.
Network not connecting	Cable/network settings	Verify Ethernet connection; check network settings; restart router.
Remote not working	Batteries/obstructions	Replace batteries; ensure clear line of sight to receiver.
Overheating	Ventilation blockage	Ensure adequate ventilation; clear vents of dust and obstructions.

Reset: Press and hold TONE and STATUS while powering on for factory reset.

Service: 1-800-370-3744; www.marantz.com