Marantz MS7000 User Manual

The Marantz MS7000 is a high-performance multi-source audio system featuring CD playback, AM/FM tuner, cassette deck, and auxiliary inputs. With advanced audio processing, remote control operation, Dolby noise reduction, programmable memory presets, and premium speaker outputs. Powered by 120V AC, 60Hz. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Playing Media 8. Audio Features 9. Care & Maintenance 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Main unit with integrated CD player, cassette deck, AM/FM tuner, Remote Control, Speaker terminals, Auxiliary inputs, Headphone jack.

FeatureDescription
CD PlayerPlays audio CDs with programmable track selection
Cassette DeckRecord/playback with Dolby B/C noise reduction
AM/FM Tuner30 station presets with auto-scan
Auxiliary InputsRCA jacks for external audio sources
Headphone jackFor private audio listening
Speaker TerminalsFor connecting external speakers
AC input connectorFor power connection
POWERTurns system on/off
VOLUMEAdjusts audio output level
SOURCE SELECTSwitches between CD, TAPE, TUNER, AUX

Installation

Unpack and inspect contents. Place on stable, level surface.

  1. Connect speakers: Use speaker wire to connect left/right speakers to corresponding terminals.
  2. Connect antenna: Attach AM loop antenna and FM wire antenna to rear terminals.
  3. Connect auxiliary devices: Use RCA cables for external audio sources.
  4. Plug into AC power outlet.

WARNING! Ensure proper ventilation; do not block ventilation openings. Use correct speaker impedance.

First-Time Setup

Power on system; initialize settings.

  1. Set clock: Press CLOCK button and set current time.
  2. Program radio stations: Use auto-scan or manual tuning to save presets.
  3. Adjust audio settings: Use BASS, TREBLE controls for preferred sound.
  4. Test all sources: Verify CD, tape, tuner, and auxiliary inputs work properly.

CAUTION! Keep away from heat sources and moisture. Ensure stable placement.

Specifications

Controls and Settings

Front Panel: POWER, VOLUME, SOURCE SELECT, CD transport controls, TAPE controls, TUNER buttons.

Remote: POWER, Numeric buttons, CD controls, TAPE controls, TUNER presets, VOLUME, MUTE, DISPLAY.

Audio: BASS, TREBLE, BALANCE, LOUDNESS. Tuner: PRESET MEMORY, AUTO SCAN, MANUAL TUNING. CD: PLAY, PAUSE, STOP, PREV/NEXT, REPEAT, RANDOM. Tape: PLAY, REC, STOP, FF, REW, DOLBY NR.

Connecting Devices

Speakers: Use proper gauge speaker wire. Auxiliary: RCA cables for external audio sources. Antenna: AM loop and FM wire antennas.

  1. Turn off system before connecting devices.
  2. Match polarity on speaker connections (red to red, black to black).
  3. Select source via SOURCE SELECT (CD, TAPE, TUNER, AUX).

Tip: Use high-quality cables for best audio performance.

Playing Media

Supports audio CDs, cassette tapes, AM/FM radio.

  1. CD Playback: Insert CD, press PLAY; use PROGRAM for track sequence.
  2. Cassette Operation: Insert tape, press PLAY; REC+PLAY for recording.
  3. Radio: Select TUNER source, tune stations, save to presets.
  4. Auxiliary: Connect external device, select AUX source.
  5. Repeat/Random: Available for CD playback.
  6. Dolby NR: Engage for cassette playback/recording noise reduction.

WARNING! Handle CDs and tapes carefully; avoid touching recording surfaces.

Audio Features

Bass/Treble Controls: Adjust frequency response. Balance: Adjust left/right channel balance. Loudness: Enhance bass at low volumes. Dolby Noise Reduction: Reduce tape hiss.

Care & Maintenance

Unplug before cleaning. Use soft, dry cloth for exterior. Clean CD lens with approved cleaner only.

CAUTION! Do not use solvents or abrasive cleaners. Demagnetize tape heads periodically.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © Marantz; all rights reserved. For support, visit www.marantz.com or contact authorized service centers.

Troubleshooting

SymptomPossible CauseCorrective Action
No powerPower cord/outletCheck power connection; try different outlet.
No soundVolume/speakersCheck volume level; verify speaker connections.
CD won't playDisc/dirty lensEnsure CD is clean; try different CD; clean lens.
Poor radio receptionAntenna/positionAdjust antenna position; ensure proper connection.
Tape issuesDirty heads/tapeClean tape heads; try different cassette.

Reset: Disconnect power for 30 seconds then reconnect.

Service: Contact authorized Marantz service center; www.marantz.com

Marantz MS7000 User Manual © - All Rights Reserved 2025