marantz manual sr7009

The Marantz SR7009 is a premium 9.2-channel AV receiver with 4K Ultra HD video pass-through, Wi-Fi and Bluetooth connectivity, Audyssey MultEQ XT32 room calibration, Dolby Atmos and DTS:X support, HEOS multi-room audio capability, and extensive connectivity options. Below are key sections for features, installation, setup, operation, specifications, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Network Setup 8. Audio Calibration 9. Care & Maintenance 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: 9.2-channel amplifier, Audyssey MultEQ XT32, Dolby Atmos/DTS:X decoding, HEOS built-in, 8 HDMI inputs, Phono input, Zone 2/3 capability.

Feature	Description
Amplifier Channels	9.2 channels (125W per channel)
Audio Formats	Dolby Atmos, DTS:X, Dolby TrueHD, DTS-HD Master Audio
Video Support	4K/60Hz pass-through, HDR, Dolby Vision
Connectivity	Wi-Fi, Bluetooth, Ethernet, AirPlay
Room Calibration	Audyssey MultEQ XT32 with Sub EQ HT
Multi-room	HEOS built-in for whole-home audio
HDMI Inputs	8 inputs (1 front), 3 outputs
Phono Input	MM phono stage for turntables
Zone Control	Zone 2 and Zone 3 capability
Network Streaming	Spotify Connect, Tidal, Deezer

Installation

Unpack and inspect contents. Place in well-ventilated area.

Connect speakers: Use appropriate gauge speaker wire for each channel.
Connect subwoofers: Use RCA cables for up to two subwoofers.
Connect video sources: Use HDMI cables for optimal video quality.
Connect network: Use Ethernet cable or setup Wi-Fi.
Plug into AC power.

WARNING! Ensure adequate ventilation; do not block vents. Unit may become hot during operation.

First-Time Setup

Power on receiver; follow on-screen setup assistant.

Run Audyssey calibration: Connect included microphone and follow prompts.
Configure inputs: Assign HDMI inputs to specific sources.
Set up network: Connect via Ethernet or configure Wi-Fi settings.
Configure zones: Set up Zone 2 and Zone 3 if needed.
Update firmware: Check for latest firmware updates.

CAUTION! Keep magnetic objects away from speakers and receiver.

Specifications

Power Output: 125W per channel (8 ohms, 20Hz-20kHz)
Total Harmonic Distortion: 0.05%
Frequency Response: 10Hz-100kHz
HDMI: 8 inputs, 3 outputs (4K/60Hz, HDR, Dolby Vision)
Network: Wi-Fi (2.4GHz/5GHz), Bluetooth, Ethernet
Audio Decoding: Dolby Atmos, DTS:X, Auro-3D
Room Correction: Audyssey MultEQ XT32
Dimensions: 17.3" W x 6.8" H x 15.7" D
Weight: 28.7 lbs

Controls and Settings

Access menu via front panel or remote control. Front Panel: POWER, INPUT SELECT, VOLUME, SETUP, TONE CONTROL.

Remote: POWER, INPUT SELECT, VOLUME, MUTE, SETUP, OPTIONS, STATUS, ZONE controls.

Audio Settings: Speaker configuration, crossover settings, distance settings, level calibration. Video Settings: Resolution, HDMI settings, video mode. Network Settings: Wi-Fi setup, Bluetooth pairing, streaming services. Zone Settings: Zone 2/3 source and volume control.

Connecting Devices

HDMI: Primary connection for video sources. Analog: RCA inputs for legacy devices. Network: Ethernet or Wi-Fi.

Turn off receiver and devices before connecting.
Use high-speed HDMI cables for 4K content.
Assign inputs in setup menu for easy selection.
Connect turntable to PHONO input (MM cartridges only).

Tip: Use quality HDMI cables for best 4K/HDR performance.

Network Setup

Supports wired and wireless network connectivity.

Wired: Connect Ethernet cable to router.
Wireless: Access network settings in menu, select SSID, enter password.
Bluetooth: Enable in menu, pair with compatible devices.
HEOS: Download HEOS app for multi-room audio control.
Streaming services: Log in to Spotify, Tidal, etc., through app.

WARNING! Keep firmware updated for optimal performance and security.

Audio Calibration

Audyssey MultEQ XT32 room correction system.

Place microphone at primary listening position.
Follow on-screen instructions for measurement positions.
System measures room acoustics and sets optimal levels.
Review and adjust settings as needed.
Save configuration when complete.

Note: Perform calibration in quiet room for best results.

Care & Maintenance

Unplug before cleaning. Use soft, dry cloth only; no liquids or chemicals.

CAUTION! Do not block ventilation ports. Keep away from moisture and extreme temperatures.

Regulatory Information

FCC compliant; CE marked. Manufactured under license from Dolby Laboratories. DTS and DTS-HD are registered trademarks. HEOS is a trademark of Denon. For support, visit www.marantz.com or contact authorized service centers.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No sound	Input selection/volume	Check input source; ensure volume not muted; verify speaker connections.
No video	HDMI connection	Check HDMI cables; verify input assignment; try different HDMI port.
Network issues	Wi-Fi signal/router	Check network settings; move closer to router; restart router.
Bluetooth not pairing	Device compatibility	Ensure device in pairing mode; check distance; restart Bluetooth.
Overheating	Ventilation	Ensure adequate ventilation; clear vents; reduce volume if necessary.

Reset: Press and hold STATUS and ENTER buttons during power-on for factory reset.

Service: Contact authorized Marantz service center; www.marantz.com