Marantz Manual SR5010

The Marantz SR5010 is a high-performance 7.2 channel AV receiver with 4K Ultra HD video pass-through, built-in Wi-Fi and Bluetooth, AirPlay support, Dolby Atmos and DTS:X compatibility, Audyssey MultEQ XT room calibration, HEOS multi-room audio technology, and extensive connectivity options. Below are key sections for setup, features, operation, and troubleshooting.

Features at a Glance

Key components: 7.2 channel amplifier, Audyssey MultEQ XT, HEOS technology, 4K video scaling, multi-zone audio.

Feature	Description
Power Output	100W per channel (8 ohms, 20Hz-20kHz)
Audio Formats	Dolby Atmos, DTS:X, Dolby TrueHD, DTS-HD Master Audio
Video Support	4K/60Hz pass-through, HDR, BT.2020, 4:4:4 Pure Color
Connectivity	Wi-Fi, Bluetooth, Ethernet, AirPlay
HDMI Ports	8 inputs (7 rear, 1 front), 2 outputs
Room Calibration	Audyssey MultEQ XT with setup microphone
Multi-room Audio	HEOS technology for wireless streaming
Zone 2 Output	Second zone audio capability
Phono Input	MM phono stage for turntables
Remote Control	Backlit remote with learning capability

Installation

Unpack and inspect contents. Place in well-ventilated area.

1. Connect speakers: Use speaker wire to connect front, center, surround, and height channels.
2. Connect subwoofer: Use RCA cable to connect to subwoofer pre-out.
3. Connect video sources: Use HDMI cables for 4K devices; component/composite for legacy devices.
4. Connect network: Use Ethernet cable or setup Wi-Fi connection.
5. Plug into AC power.

WARNING! Ensure proper ventilation; leave at least 4 inches clearance on all sides.

First-Time Setup

Power on receiver; follow on-screen setup wizard.

1. Run Audyssey calibration: Connect setup microphone; follow on-screen instructions.
2. Configure inputs: Assign HDMI inputs to specific sources (Blu-ray, Game, etc.).
3. Set network connection: Connect via Wi-Fi or Ethernet for streaming services.
4. Configure audio settings: Set speaker sizes, crossovers, and distances.
5. Update firmware: Check for latest firmware updates via network.

CAUTION! Do not move microphone during calibration process.

Specifications

• Amplifier Section: 7.2 channels, 100W per channel (8 ohms)
• Frequency Response: 10Hz-100kHz (+1, -3dB)
• Total Harmonic Distortion: 0.05% (20Hz-20kHz)
• Signal-to-Noise Ratio: 100dB (line level)
• HDMI: 8 inputs, 2 outputs (4K/60Hz, HDR, HDCP 2.2)
• Digital Audio Inputs: 2 optical, 2 coaxial
• Analog Audio Inputs: 7 stereo pairs, 1 phono MM
• Network: Wi-Fi (2.4GHz/5GHz), Ethernet, Bluetooth
• Streaming Services: Spotify, Pandora, Tidal, Deezer
• Power Consumption: 600W maximum, 65W standby

Controls and Settings

Access setup via front panel or remote control. Front Panel: POWER, INPUT SELECT, VOLUME, SETUP, TONE CONTROL.

Remote: POWER, INPUT SELECT, VOLUME, MUTE, SETUP, OPTIONS, STATUS, ZONE 2.

Audio: Speaker configuration, crossover settings, Audyssey settings, tone controls. Video: Resolution settings, HDMI control, video mode. Network: Wi-Fi setup, firmware update, streaming services. System: GUI settings, remote control setup, firmware information.

Connecting Devices

HDMI: Primary connection for modern devices. Analog: Component, composite, stereo audio. Network: Ethernet or Wi-Fi.

1. Turn off receiver and devices before connecting.
2. Use high-speed HDMI cables for 4K content.
3. Assign inputs in setup menu for easy selection.
4. Connect turntable to PHONO input (MM cartridges only).

Tip: Use HDMI ARC for simplified audio from TV to receiver.

Network Setup

Supports wired and wireless network connections.

1. Wired: Connect Ethernet cable to router and receiver.
2. Wireless: Access network setup in menu; select Wi-Fi network and enter password.
3. Streaming services: Access via HEOS app or front panel interface.
4. Firmware updates: Check automatically or manually via network.
5. Multi-room: Set up HEOS speakers in other rooms for whole-home audio.

WARNING! Ensure stable network connection for streaming services.

Audio Calibration

Audyssey MultEQ XT room correction system.

1. Connect setup microphone to front panel MIC input.
2. Place microphone at primary listening position.
3. Follow on-screen instructions for multiple measurement positions.
4. System calculates optimal speaker settings, distances, and levels.
5. Save calibration and review settings in speaker setup menu.

CAUTION! Maintain quiet environment during calibration measurements.

Care & Maintenance

Unplug before cleaning. Use soft, dry cloth only; avoid chemicals.

CAUTION! Do not block ventilation slots; keep away from heat and moisture.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © Marantz America, LLC. For support, visit www.marantz.com or contact 1-800-370-3744. HEOS is a trademark of Denon Electronics.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No sound	Input selection/speaker wires	Check input selection; verify speaker connections; ensure volume not muted.
No video	HDMI connection/settings	Verify HDMI cables; check input assignment; try different HDMI port.
Network connection issues	Wi-Fi signal/router	Check network password; move closer to router; try wired connection.
Remote not working	Batteries/obstructions	Replace batteries; ensure clear line of sight to receiver.
Overheating	Ventilation blockage	Ensure proper ventilation; clear dust from vents; reduce volume levels.

Reset: Press and hold POWER and SURROUND MODE buttons for 5 seconds.

Service: 1-800-370-3744; www.marantz.com