Marantz HD 880 Manual

The Marantz HD 880 is a high-performance CD player featuring advanced digital-to-analog conversion technology, precision laser tracking system, high-quality audio outputs, remote control operation, programmable playback, repeat functions, and digital display. Designed for audiophiles seeking superior sound quality with robust construction and user-friendly controls. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: Precision CD transport mechanism, High-quality DAC, Remote Control, Digital output, Analog audio outputs, Headphone jack, Display panel.

Feature	Description
Digital output	Coaxial and optical digital outputs for external DAC connection
Analog outputs	RCA left/right audio outputs
Headphone jack	For private listening with volume control
AC power input	For power connection
Remote sensor	Infrared receiver for remote control operation
Display	LCD display showing track info and status
OPEN/CLOSE	Ejects and closes CD tray
PLAY/PAUSE	Starts and pauses playback
STOP	Stops playback
POWER	Turns unit on/off

Installation

Unpack and inspect contents. Place on stable, level surface.

1. Connect to amplifier/receiver: Use RCA cables from analog outputs to amplifier inputs.
2. Connect digital output: Use coaxial or optical cable to compatible DAC or receiver.
3. Connect headphones: Plug into front panel headphone jack for private listening.
4. Plug into AC power outlet.

WARNING! Avoid placing near heat sources or in humid environments. Ensure proper ventilation around unit.

First-Time Setup

Power on unit; initialize system.

1. Load CD: Press OPEN/CLOSE, place CD properly in tray, close tray.
2. Basic playback: Press PLAY to begin playback.
3. Adjust volume: Use volume control for headphone output.
4. Configure settings: Use SETUP menu for display options, playback preferences.

CAUTION! Handle CDs by edges only. Keep discs clean and free from scratches.

Specifications

• Supported Formats: Audio CD, CD-R, CD-RW
• Frequency Response: 20Hz - 20kHz
• Signal-to-Noise Ratio: >100dB
• Total Harmonic Distortion: <0.005%
• Outputs: Analog RCA, Coaxial digital, Optical digital, Headphone
• Display: LCD with track/time information
• Power Requirements: 120V AC, 60Hz
• Dimensions: Standard component width (17-inch)
• Weight: Approximately 15 lbs

Controls and Settings

Front Panel: POWER, OPEN/CLOSE, PLAY/PAUSE, STOP, SKIP buttons, Display, Headphone jack with volume control.

Remote: POWER, Numeric buttons, OPEN/CLOSE, PLAY, PAUSE, STOP, SKIP, REPEAT, PROGRAM, DISPLAY.

Settings: Repeat modes (Track, All, A-B), Program play (up to 20 tracks), Display options (Time remaining, elapsed), Audio output selection (Analog/Digital).

Connecting to Audio Systems

Analog: RCA cables to amplifier/receiver. Digital: Coaxial or optical to compatible equipment.

1. Turn off all equipment before connecting.
2. Match cable types to appropriate outputs.
3. Ensure secure connections at both ends.
4. Select correct input on amplifier/receiver.

Tip: Use high-quality cables for best audio performance.

Playing CDs

Supports standard audio CDs, CD-R, and CD-RW discs.

1. Insert disc: Press OPEN/CLOSE, place CD label-side up, close tray.
2. Play: Press PLAY; unit reads TOC and begins playback.
3. Skip tracks: Use SKIP buttons to move between tracks.
4. Pause: Press PAUSE to temporarily halt playback.
5. Stop: Press STOP to end playback.
6. Eject: Press OPEN/CLOSE to remove disc.

WARNING! Do not move unit during playback. Keep disc tray clean and free from obstructions.

Advanced Functions

Repeat: Press REPEAT to cycle through repeat modes (Track, All, Off). Program: Use PROGRAM to create custom play sequences. A-B Repeat: Set start and end points for section repeat. Random Play: Shuffles track order for varied listening.

Care & Maintenance

Unplug before cleaning. Use soft, dry cloth for exterior. Use CD cleaning discs periodically for lens maintenance.

CAUTION! Never use solvents or abrasive cleaners. Avoid touching laser lens.

Regulatory Information

FCC Part 15: Class B digital device compliant. CE marked for European compliance. Copyright protection systems supported. For technical support, contact Marantz customer service or visit authorized service centers.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power	Power cord disconnected	Check power connection; ensure outlet is functional
Disc not recognized	Dirty/damaged disc	Clean disc; check for scratches; try different CD
No sound	Incorrect connections/mute	Check audio cables; verify amplifier settings; check mute
Skip during playback	Dirty lens/vibration	Clean laser lens; ensure stable surface; check disc quality
Remote not working	Batteries/obstructions	Replace batteries; ensure line of sight to sensor

Reset: Unplug unit for 30 seconds, then reconnect if experiencing operational issues.

Service: Contact authorized Marantz service center for repairs.