Marantz DR700 CD Recorder Manual

The Marantz DR700 is a professional-grade CD recorder featuring digital and analog recording capabilities, CD-R/RW compatibility, digital optical and coaxial inputs/outputs, analog RCA inputs/outputs, sync recording, track marking, editing functions, sampling rate conversion, and high-quality audio processing. Below are key sections for operation, features, connections, recording procedures, and troubleshooting.

1. Features at a Glance 2. Installation & Connections 3. Basic Operation 4. Specifications 5. Controls and Functions 6. Recording Procedures 7. Editing Functions 8. Digital Input Options 9. Maintenance & Care 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: CD transport mechanism, digital/analog audio circuits, front panel controls, remote control, multiple input/output options.

Feature	Description
CD-R/RW Compatibility	Records and plays CD-R and CD-RW discs
Digital Inputs	Optical and coaxial digital inputs
Analog Inputs	RCA stereo audio inputs
Sync Recording	Automatic start/stop with source signal
Track Marking	Automatic and manual track division
Editing Functions	Track divide, combine, delete, move
Sampling Rate Conversion	44.1kHz to 48kHz and vice versa
Digital Outputs	Optical and coaxial digital outputs
Analog Outputs	RCA stereo audio outputs
Remote Control	Full-function infrared remote

Installation & Connections

Unpack and inspect contents. Place on stable, level surface.

Connect audio sources: Use digital optical/coaxial or analog RCA inputs.
Connect audio outputs: Use digital or analog outputs to amplifier/speakers.
Power connection: Plug into AC power outlet.
Remote setup: Install batteries in remote control.

WARNING! Ensure proper ventilation; do not block ventilation openings. Use stable power source.

Basic Operation

Power on unit; load CD-R/RW disc.

Source selection: Choose between digital and analog inputs.
Recording level: Adjust input levels using level meters.
Recording mode: Select sync or manual recording.
Playback: Use transport controls for play, pause, stop, skip.
Display: Monitor track time, recording status, error messages.

CAUTION! Handle discs carefully; avoid fingerprints and scratches.

Specifications

Disc Compatibility: CD-R, CD-RW, CD-DA
Recording Formats: CD-DA (Red Book standard)
Frequency Response: 20Hz-20kHz (±0.5dB)
Signal-to-Noise Ratio: >100dB
Dynamic Range: >98dB
Total Harmonic Distortion: <0.003%
Digital Inputs: Optical, Coaxial (24-bit/96kHz capable)
Analog Inputs: RCA (2-channel)
Power Requirements: 120V AC, 60Hz
Dimensions: Standard component width (17.5")

Controls and Functions

Front Panel: POWER, EJECT, PLAY, STOP, REC, INPUT SELECT, LEVEL controls.

Remote: POWER, Numeric buttons, TRANSPORT controls, INPUT SELECT, RECORD, EDIT functions.

Display Indicators: Recording level meters, track/time display, error messages, input status. Menu Functions: Recording setup, editing options, system configuration, default settings.

Recording Procedures

Supports manual and sync recording modes.

Prepare disc: Insert blank CD-R/RW, format if necessary.
Select input: Choose digital or analog source.
Set levels: Adjust recording levels using meters (aim for -3dB peak).
Start recording: Press REC button (manual) or enable sync recording.
Monitor recording: Watch level meters and time display.
Stop recording: Press STOP or let sync recording auto-stop.
Finalize disc: Required for CD-R playback on other players.

WARNING! Do not interrupt power during recording or finalization.

Editing Functions

Comprehensive track editing capabilities.

Track Divide: Split long recordings into separate tracks.
Track Combine: Merge adjacent tracks into one.
Track Delete: Remove unwanted tracks from disc.
Track Move: Reorder tracks on disc.
Track Erase: Erase individual tracks (CD-RW only).
Disc Erase: Complete disc erasure (CD-RW only).

Note: Some editing functions require blank space on disc.

Digital Input Options

Flexible digital audio input handling.

Optical Input: Toslink connector for digital audio sources.
Coaxial Input: RCA connector for digital audio sources.
Sampling Rate: Automatic detection and conversion if needed.
Copy Protection: SCMS serial copy management system.

Tip: Use digital connections for best audio quality.

Maintenance & Care

Unplug before cleaning. Use soft, dry cloth for exterior.

CAUTION! Do not use solvents or abrasive cleaners. Keep away from moisture and extreme temperatures.

Regulatory Information

FCC Part 15: Class B digital device compliant. Copyright © Marantz America, Inc. All rights reserved. Contains technology protected by patents. For technical support, visit www.marantz.com or contact 1-800-270-4179.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Disc not recognized	Dirty/damaged disc	Clean disc; try different brand; check compatibility
No recording	Input signal/levels	Check input connection; verify signal present; adjust levels
Recording errors	Disc quality/buffer	Use high-quality discs; ensure stable source signal
Playback issues	Disc finalization	Finalize disc for playback on other players
Remote not working	Batteries/obstacles	Replace batteries; ensure line of sight to sensor

Reset: Unplug unit for 30 seconds to reset microprocessor.

Service: 1-800-270-4179; www.marantz.com