Marantz CD84 Manual

The Marantz CD84 is a high-quality CD player featuring advanced digital audio technology, precision laser tracking, remote control operation, digital output, programmable playback, repeat functions, and high-fidelity audio reproduction. Designed for audiophiles with superior sound quality and reliable performance. Below are key sections for features, installation, operation, specifications, and maintenance.

Features at a Glance

Key components: High-precision laser mechanism, Remote Control, Digital output, Analog audio outputs, Headphone jack, Programmable memory.

Feature	Description
Laser mechanism	Precision tracking for accurate CD playback
Digital output	For connection to external DACs and digital processors
Analog audio outputs	RCA jacks for left/right channel connection
Headphone jack	For private listening with volume control
AC power input	For power connection
Remote control sensor	Infrared receiver for remote operation
OPEN/CLOSE	Ejects and closes CD tray
PLAY/PAUSE	Starts and pauses playback
STOP	Stops current playback
POWER	Turns unit on/off

Installation

Unpack and inspect contents. Place on stable, level surface.

1. Connect to amplifier: Use RCA cables from audio outputs to amplifier inputs.
2. Connect digital output: Use coaxial cable to digital input on compatible devices.
3. Connect headphones: Plug into front panel headphone jack.
4. Plug into AC power outlet.

WARNING! Avoid placing near heat sources or in direct sunlight. Ensure proper ventilation.

First-Time Setup

Power on unit; initialize system.

1. Load CD: Press OPEN/CLOSE, place CD properly in tray.
2. Basic playback: Press PLAY to start playback.
3. Volume adjustment: Use volume control for headphone output.
4. Remote setup: Install batteries in remote control.

CAUTION! Handle CDs by edges only. Keep laser mechanism clean.

Specifications

• Audio Format: Compact Disc Digital Audio
• Frequency Response: 20Hz - 20kHz
• Signal-to-Noise Ratio: >90dB
• Total Harmonic Distortion: <0.05%
• Outputs: Analog RCA, Digital coaxial, Headphone
• Power Requirements: 120V AC, 60Hz
• Dimensions: Standard component width
• Weight: Approximately 5kg

Controls and Settings

Front panel: POWER, OPEN/CLOSE, PLAY/PAUSE, STOP, SKIP buttons, Display window.

Remote: POWER, Numeric buttons, OPEN/CLOSE, PLAY, PAUSE, STOP, SKIP, PROGRAM, REPEAT, DISPLAY.

Basic functions: Track selection, Play/pause, Stop, Skip forward/backward. Advanced functions: Program memory (up to 20 tracks), Repeat (track/all), Time display, Random play.

Connecting to Audio Systems

Analog connection: RCA cables to amplifier. Digital connection: Coaxial cable to digital processor.

1. Turn off all equipment before connecting.
2. Use quality audio cables for best performance.
3. Match left/right channels correctly.
4. Secure all connections firmly.

Tip: Use gold-plated connectors for optimal signal transfer.

Playing CDs

Supports standard audio CDs, CD-R, CD-RW.

1. Insert disc: Press OPEN/CLOSE, place CD label side up.
2. Play: Press PLAY; unit reads TOC and starts playback.
3. Track selection: Use numeric buttons or SKIP buttons.
4. Pause: Press PAUSE to temporarily stop playback.
5. Stop: Press STOP to end playback.
6. Eject: Press OPEN/CLOSE to remove disc.

WARNING! Do not move unit during playback. Keep discs clean and scratch-free.

Advanced Functions

Program play: Select specific tracks in desired order. Repeat: Single track or entire CD. Random play: Shuffles track order. Time display: Elapsed/remaining time. Search: Fast forward/rewind within tracks.

Care & Maintenance

Unplug before cleaning. Use soft, dry cloth for exterior. Clean lens only with approved CD lens cleaner.

CAUTION! Never use solvents or abrasive cleaners. Avoid touching laser lens.

Regulatory Information

FCC compliant. CE marked. Manufactured under quality standards. Copyright protection systems. For technical support, contact Marantz customer service or authorized dealers.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power	Power cord/outlet	Check power connection; try different outlet.
No sound	Connections/volume	Check audio cables; verify amplifier settings; adjust volume.
Disc not reading	Disc damage/dirty	Clean disc; check for scratches; try different CD.
Remote not working	Batteries/obstruction	Replace batteries; ensure clear line to sensor.
Skip or jump	Vibration/dirty lens	Place on stable surface; clean laser lens.

Reset: Unplug unit for 30 seconds, then reconnect.

Service: Contact authorized Marantz service center for repairs.