Marantz CD63 KI Manual

The Marantz CD63 KI is a high-performance CD player featuring Ken Ishiwata signature tuning, 1-bit D/A converter, HDAM (Hyper Dynamic Amplifier Module) technology, digital and analog outputs, remote control operation, and premium audio components for superior sound quality. Below are key sections for features, installation, operation, specifications, and maintenance.

Features at a Glance

Key components: CD transport mechanism, HDAM circuitry, Ken Ishiwata tuned components, digital and analog outputs, remote control.

Installation

Unpack and inspect contents. Place on stable, level surface.

1. Connect to amplifier: Use high-quality RCA cables to connect analog outputs to amplifier inputs.
2. Connect digital output: Use coaxial cable to connect to compatible digital processor if needed.
3. Power connection: Plug into AC power outlet.
4. Antenna placement: Ensure adequate ventilation around unit.

WARNING! Do not place near heat sources or in humid environments. Use stable surface to prevent tipping.

Operation

Power on unit; load CD and begin playback.

1. Power on: Press POWER button on front panel or remote.
2. Load CD: Press OPEN/CLOSE, place CD in tray, press again to close.
3. Playback: Press PLAY; use SKIP buttons to navigate tracks.
4. Stop/Eject: Press STOP; OPEN/CLOSE to remove disc.
5. Programming: Use PROGRAM function to create custom play sequences.

CAUTION! Do not move unit during playback. Handle CDs by edges only.

Specifications

• Audio System: Compact Disc Digital Audio
• Frequency Response: 2Hz - 20kHz
• Signal-to-Noise Ratio: >100dB
• Dynamic Range: >96dB
• Total Harmonic Distortion: <0.002%
• Output Level: 2.0V RMS
• Digital Output: Coaxial, 0.5Vp-p/75Ω
• Power Consumption: 15W
• Dimensions: 440 x 105 x 315mm (W x H x D)
• Weight: 5.5kg

Controls and Functions

Front Panel: POWER, OPEN/CLOSE, PLAY, PAUSE, STOP, SKIP, DISPLAY.

Remote: POWER, Numeric buttons, OPEN/CLOSE, PLAY, PAUSE, STOP, SKIP, PROGRAM, REPEAT, RANDOM.

Display Functions: Track number, elapsed time, total time, programming information. Playback Modes: Normal, Repeat (Track/All), Random play, Program play. Search Functions: Forward and reverse search during playback.

Connecting to Audio System

Analog Outputs: Connect to amplifier CD input. Digital Output: Connect to compatible digital processor.

1. Turn off all components before connecting.
2. Use high-quality shielded cables for best performance.
3. Connect analog outputs to amplifier CD or line inputs.
4. For digital connection, use 75Ω coaxial cable.

Tip: Keep audio cables away from power cords to minimize interference.

Playback Features

Supports standard audio CDs, CD-R, CD-RW.

1. Direct track access: Use numeric buttons to select specific tracks.
2. Program play: Create custom play sequences of up to 20 tracks.
3. Repeat functions: Repeat single track or entire disc.
4. Random play: Play tracks in random order.
5. Search: Fast forward and reverse during playback.
6. Time display: Show elapsed or remaining time.
7. Pause function: Temporarily halt playback.

WARNING! Do not use damaged or improperly burned CDs. Avoid extreme temperatures.

Maintenance

Regular cleaning of lens and transport mechanism recommended.

1. Clean CD lens periodically with approved CD lens cleaner.
2. Keep unit free from dust and moisture.
3. Clean exterior with soft, dry cloth only.
4. Check connections periodically for corrosion or looseness.

CAUTION! Do not use solvents or abrasive cleaners. Unplug before cleaning.

Technical Information

HDAM Circuitry: Discrete amplifier modules for superior audio performance. Power Supply: Separate regulated supplies for digital and analog sections. Vibration Control: Heavy-duty chassis with damping materials. Laser Type: Semiconductor laser, λ=780nm.

Troubleshooting

Reset: Unplug unit for 30 seconds to reset microprocessor.

Service: Contact authorized Marantz service center for technical support.