Marantz CD6005 CD Player Manual

The Marantz CD6005 is a high-performance CD player featuring advanced audio circuitry, high-quality DAC, multiple digital outputs, remote control capability, and premium build quality. Designed for audiophiles seeking exceptional sound reproduction from CDs and CD-R/RW media. Below are key sections covering features, setup, operation, specifications, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting to Audio Systems 7. Playing CDs 8. Advanced Features 9. Care & Maintenance 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Premium components: High-precision transport mechanism, Cirrus Logic CS4398 DAC, toroidal transformer, gold-plated connectors.

Feature	Description
CD Transport	High-precision mechanism for accurate disc reading
DAC	Cirrus Logic CS4398 24-bit/192kHz digital-to-analog converter
Digital Outputs	Coaxial and optical digital outputs
Analog Outputs	RCA stereo outputs
Power Supply	Custom toroidal transformer for clean power
Remote Control	RC0056CD remote included
Display	High-contrast fluorescent display
Headphone Output	Front-panel 1/4" headphone jack
Playback Formats	CD, CD-R, CD-RW
Construction	Anti-resonance chassis design

Installation

Unpack and inspect contents. Place on stable, level surface.

Connect to amplifier: Use high-quality RCA cables to connect analog outputs to amplifier inputs.
Digital connections: Connect coaxial or optical output to compatible DAC or receiver.
Power connection: Plug into AC power outlet.
Headphone connection: Plug headphones into front panel jack when needed.

WARNING! Ensure proper ventilation; do not block ventilation openings. Use stable surface to prevent tipping.

First-Time Setup

Power on CD player; initialize system.

Place unit: Ensure stable, vibration-free surface away from heat sources.
Connect audio: Use high-quality interconnects to amplifier/receiver.
Power up: Connect to AC power and press power button.
Load disc: Press OPEN/CLOSE, place CD properly in tray.
Initial play: Press PLAY to begin playback.

CAUTION! Allow proper ventilation space around unit. Avoid magnetic fields near audio equipment.

Specifications

Frequency Response: 2Hz - 20kHz
Signal-to-Noise Ratio: 110dB
Dynamic Range: 100dB
Total Harmonic Distortion: 0.002%
Output Level: 2.0V RMS
Digital Outputs: Coaxial, Optical
Power Consumption: 18W
Dimensions: 440mm × 105mm × 345mm (W×H×D)
Weight: 7.5kg
Power Requirements: 120V AC, 60Hz

Controls and Settings

Front Panel: POWER, OPEN/CLOSE, PLAY, PAUSE, STOP, SKIP, DISPLAY, HEADPHONE jack.

Remote: POWER, Numeric buttons, OPEN/CLOSE, PLAY, PAUSE, STOP, SKIP, REPEAT, RANDOM, DISPLAY.

Playback Modes: Repeat (Track/Disc/All), Random play, Program play (up to 20 tracks). Display: Track/time remaining/total time. Headphone: Independent volume control. Digital Filter: Selectable filter characteristics.

Connecting to Audio Systems

Analog: RCA outputs to amplifier. Digital: Coaxial/optical to DAC or receiver.

Turn off all equipment before connecting.
Use high-quality cables for best performance.
Connect analog outputs to amplifier CD input.
For digital connection, use coaxial or optical cable to compatible device.
Ensure secure connections.

Tip: Use high-quality interconnects for optimal audio performance.

Playing CDs

Supports CD, CD-R, CD-RW media.

Insert disc: Press OPEN/CLOSE, place CD label-side up in tray.
Close tray: Press OPEN/CLOSE or PLAY to close and start playback.
Playback control: PLAY, PAUSE, STOP, SKIP (forward/backward).
Track selection: Use numeric buttons or SKIP to select tracks.
Repeat: Press REPEAT for track/disc/all repeat modes.
Random: Press RANDOM for shuffle playback.
Program: Use PROGRAM button to create custom play sequences.
Display: Cycle through display modes with DISPLAY button.

WARNING! Do not move unit during playback. Handle discs by edges only.

Advanced Features

Digital Filter: Selectable filter characteristics for different listening preferences. Headphone Amplifier: High-quality dedicated headphone output. Remote System Control: Compatible with Marantz RC0056CD remote and system control.

Care & Maintenance

Unplug before cleaning. Use soft, dry cloth for exterior. Clean lens only with approved CD lens cleaner.

CAUTION! Do not use solvents or abrasive cleaners. Keep away from moisture and extreme temperatures.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © Marantz America, Inc. All rights reserved. For support, visit www.marantz.com or contact authorized Marantz service centers.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power	Power cord/outlet	Check power connection; ensure outlet is working.
No sound	Connections/volume	Check audio connections; verify amplifier settings.
Disc not reading	Disc damage/cleanliness	Clean disc; check for scratches; try different CD.
Remote not working	Batteries/obstructions	Replace batteries; ensure clear line to IR sensor.
Skip or hesitation	Disc quality/vibration	Use quality CDs; ensure stable surface placement.

Reset: Unplug unit for 30 seconds, then reconnect.

Service: Contact authorized Marantz service center; www.marantz.com